Computational Fluid Dynamics Investigation of Turbulent Flow Inside a Rotary Double External Gear Pump

This article presents a numerical investigation of 2D turbulent flow within a double external gear pump. The configuration of the inlet and outlet ports is determined such that the double gear pump acts like the combination of two parallel pumps. The complex geometry of the double gear pump, existence of narrow gaps between rotating and stationary walls, and rapidly deforming flow domain make the numerical solution more complicated. In order to solve the mass, momentum, and energy conservation laws along with the k-e turbulence model, a second-order finite volume method has been used over a dynamically varying unstructured mesh. The numerical results including pressure contours, velocity vectors, flow patterns inside the suction chamber, leakage paths, and time variation of volumetric flow rate are presented in detail. The flow rate characteristic curves with linear behavior are demonstrated at rotational speeds and outlet pressures in the range of 1500–4000 rpm and 2–80 bar, respectively. The effect of reducing the gear-casing gap-size on the augmentation of the net flow rate has been investigated. It is concluded that the minimum oil pressure within the gear pump occurs at the two places between contacting gears near the inlet ports. The contours of vapor volume fraction are also illustrated.

[1]  A. Vernet,et al.  Numerical simulation of turbulent flow in the suction chamber of a gearpump using deforming mesh and mesh replacement , 2010 .

[2]  Andrea Vacca,et al.  Modelling and experimental validation of external spur gear machines for fluid power applications , 2011, Simul. Model. Pract. Theory.

[3]  K. Riemslagh,et al.  An arbitrary Lagrangian-Eulerian finite-volume method for the simulation of rotary displacement pump flow , 2000 .

[4]  Noriko Morioka,et al.  Development of Double Gear Fuel Pump for Heat Management Improvement , 2006 .

[5]  Kuo Jao Huang,et al.  Kinematic flowrate characteristics of external spur gear pumps using an exact closed solution , 2009 .

[6]  Shu Wang,et al.  Numerical modelling and analysis of external gear pumps by applying generalized control volumes , 2011 .

[7]  J. Ghazanfarian,et al.  Numerical Simulation of Water-Entry and Sedimentation of an Elliptic Cylinder Using Smoothed-Particle Hydrodynamics Method , 2014 .

[8]  J. Ghazanfarian,et al.  A numerical investigation of fluid flow over a rotating cylinder with cross flow oscillation , 2009 .

[9]  W. Strasser,et al.  CFD Investigation of Gear Pump Mixing Using Deforming/Agglomerating Mesh , 2007 .

[10]  Hrvoje Jasak,et al.  Dynamic Mesh Handling in OpenFOAM Applied to Fluid-Structure Interaction Simulations , 2010 .

[11]  B. Launder,et al.  Mathematical Models of turbulence , 1972 .

[12]  J. Ghazanfarian,et al.  Convective heat transfer from a rotating cylinder with inline oscillation , 2010 .

[13]  P. Thanapandi,et al.  Centrifugal pump transient characteristics and analysis using the method of characteristics , 1995 .

[14]  R. Codina,et al.  A finite element method for the solution of rotary pumps , 2007 .

[15]  P. J. Gamez-Montero,et al.  Analysis of the turbulence in the suction chamber of an external gear pump using Time Resolved Particle Image Velocimetry , 2008 .

[16]  Jan Vierendeels,et al.  Flow simulations in rotary volumetric pumps and compressors with the fictitious domain method , 2002 .

[17]  M Suresh Kumar,et al.  Computational fluid dynamics integrated development of gerotor pump inlet components for engine lubrication , 2010 .

[18]  Stephanus Büttgenbach,et al.  Micro gear pump with internal electromagnetic drive , 2010 .

[19]  Anton Vernet,et al.  Experimental analysis of the flow dynamics in the suction chamber of an external gear pump , 2011 .

[20]  J. Ghazanfarian,et al.  A numerical study of convective heat transfer from a rotating cylinder with cross-flow oscillation , 2009 .

[21]  Rickard Bensow,et al.  SIMULATING CAVITATING FLOWS WITH LES IN OPENFOAM , 2010 .

[22]  Ben Hunt,et al.  Effect of lobe pumping on human albumin: development of a lobe pump simulator using smoothed particle hydrodynamics 1 , 2006, Biotechnology and applied biochemistry.

[23]  Noah D. Manring,et al.  The Theoretical Flow Ripple of an External Gear Pump , 2003 .

[24]  Paolo Pennacchi,et al.  Involute Gear Pumps Versus Lobe Pumps: A Comparison , 1996, DAC 1996.

[25]  Pedro-Javier Gamez-Montero,et al.  Influence of the interteeth clearances on the flow ripple in a gerotor pump for engine lubrication , 2012 .

[26]  E. Codina,et al.  Numerical Analysis of External Gear Pumps Including Cavitation , 2012 .

[27]  Andrea Vacca,et al.  OPTIMIZATION OF RELEVANT DESIGN PARAMETERS OF EXTERNAL GEAR PUMPS , 2008 .