Spray‐Layer‐by‐Layer Carbon Nanotube/Electrospun Fiber Electrodes for Flexible Chemiresistive Sensor Applications

Development of a versatile method for incorporating conductive materials into textiles could enable advances in wearable electronics and smart textiles. One area of critical importance is the detection of chemicals in the environment for security and industrial process monitoring. Here, the fabrication of a fl exible, sensor material based on functionalized multi-walled carbon nanotube (MWNT) fi lms on a porous electrospun fi ber mat for real-time detection of a nerve agent simulant is reported. The material is constructed by layer-bylayer (LbL) assembly of MWNTs with opposite charges, creating multilayer fi lms of MWNTs without binder. The vacuum-assisted spray-LbL process enables conformal coatings of nanostructured MWNT fi lms on individual electrospun fi bers throughout the bulk of the mat with controlled loading and electrical conductivity. A thiourea-based receptor is covalently attached to the primary amine groups on the MWNT fi lms to enhance the sensing response to dimethyl methylphosphonate (DMMP), a simulant for sarin nerve agent. Chemiresistive sensors based on the engineered textiles display reversible responses and detection limits for DMMP as low as 10 ppb in the aqueous phase and 5 ppm in the vapor phase. This fabrication technique provides a versatile and easily scalable strategy for incorporating conformal MWNT fi lms into three-dimensional substrates for numerous applications.

[1]  Michael C. McAlpine,et al.  Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors. , 2007, Nature materials.

[2]  Chang Liu,et al.  Comparison of electrical properties between multi-walled carbon nanotube and graphene nanosheet/high density polyethylene composites with a segregated network structure , 2011 .

[3]  Yi Cui,et al.  Stretchable, porous, and conductive energy textiles. , 2010, Nano letters.

[4]  Fei Wang,et al.  Diverse chemiresistors based upon covalently modified multiwalled carbon nanotubes. , 2011, Journal of the American Chemical Society.

[5]  Kong,et al.  Nanotube molecular wires as chemical sensors , 2000, Science.

[6]  T. Swager,et al.  Carbon nanotube/polythiophene chemiresistive sensors for chemical warfare agents. , 2008, Journal of the American Chemical Society.

[7]  Liangbing Hu,et al.  Carbon nanotube thin films: fabrication, properties, and applications. , 2010, Chemical reviews.

[8]  M. Boyce,et al.  Spray Layer‐by‐Layer Electrospun Composite Proton Exchange Membranes , 2013 .

[9]  W. Deen Analysis Of Transport Phenomena , 1998 .

[10]  Meifang Zhu,et al.  Carbon nanotube-incorporated multilayered cellulose acetate nanofibers for tissue engineering applications. , 2013, Carbohydrate polymers.

[11]  Bon-Cheol Ku,et al.  Electrostatic Assembly of Conjugated Polymer Thin Layers on Electrospun Nanofibrous Membranes for Biosensors , 2004 .

[12]  I. Kinloch,et al.  Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites , 2003 .

[13]  Xili Gao,et al.  Large dielectric constant of the chemically functionalized carbon nanotube/polymer composites , 2008 .

[14]  V. Deimede,et al.  Miscibility Behavior of Polybenzimidazole/Sulfonated Polysulfone Blends for Use in Fuel Cell Applications , 2000 .

[15]  F. Wang,et al.  Anion complexation and sensing using modified urea and thiourea-based receptors. , 2010, Chemical Society reviews.

[16]  P Lukowicz,et al.  Wearable Systems for Health Care Applications , 2004, Methods of Information in Medicine.

[17]  Balberg,et al.  Scher and Zallen criterion: Applicability to composite systems. , 1987, Physical review. B, Condensed matter.

[18]  Michael S Strano,et al.  Understanding the dynamics of signal transduction for adsorption of gases and vapors on carbon nanotube sensors. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[19]  G. Koops,et al.  High flux polyethersulfone-polyimide blend hollow fiber membranes for gas separation , 2002 .

[20]  P. Ma,et al.  Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes , 2007 .

[21]  P. Hammond Building biomedical materials layer-by-layer , 2012 .

[22]  Gero Decher,et al.  Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites , 1997 .

[23]  Masaru Matsuo,et al.  Electrical and mechanical properties of polyimide–carbon nanotubes composites fabricated by in situ polymerization , 2005 .

[24]  Y. Segui,et al.  EFFECT OF PLASMA TREATMENTS ON WETTABILITY OF POLYSULFONE AND POLYETHERIMIDE , 1991 .

[25]  Musa R. Kamal,et al.  Estimation of the volume resistivity of electrically conductive composites , 1997 .

[26]  Frank T. Fisher,et al.  Amino-Functionalized Carbon Nanotubes for Binding to Polymers and Biological Systems , 2005, Chemistry of Materials.

[27]  Yunfeng Shi,et al.  Surface modification of poly-l-lactic acid fibrous scaffolds by a molecular-designed multi-walled carbon nanotube multilayer for enhancing cell interactions , 2013 .

[28]  U. Sundararaj,et al.  Melt Mixing of Polycarbonate with Multi‐Walled Carbon Nanotubes in Miniature Mixers , 2006 .

[29]  Isaac Balberg,et al.  Excluded volume and its relation to the onset of percolation , 1984 .

[30]  Paula T Hammond,et al.  Spraying asymmetry into functional membranes layer-by-layer. , 2009, Nature materials.

[31]  Joseph Wang,et al.  Wearable Electrochemical Sensors and Biosensors: A Review , 2013 .

[32]  D. Finkelstein,et al.  Method to impart electro- and biofunctionality to neural scaffolds using graphene-polyelectrolyte multilayers. , 2012, ACS applied materials & interfaces.

[33]  E. S. Snow,et al.  Chemical Detection with a Single-Walled Carbon Nanotube Capacitor , 2005, Science.

[34]  Zhenan Bao,et al.  Sorted and aligned single-walled carbon nanotube networks for transistor-based aqueous chemical sensors. , 2009, ACS nano.

[35]  R. A. McGill,et al.  Nerve agent detection using networks of single-walled carbon nanotubes , 2003 .

[36]  Michael S Strano,et al.  On-chip micro gas chromatograph enabled by a noncovalently functionalized single-walled carbon nanotube sensor array. , 2008, Angewandte Chemie.

[37]  F. G. Bordwell,et al.  Equilibrium Acidities in Dimethyl Sulfoxide Solution , 1988 .

[38]  Michael F. Rubner,et al.  Influence of the Degree of Ionization on Weak Polyelectrolyte Multilayer Assembly , 2005 .

[39]  E. Snow,et al.  Chemical vapor detection using single-walled carbon nanotubes. , 2006, Chemical Society reviews.

[40]  S. Redner,et al.  Introduction To Percolation Theory , 2018 .

[41]  Hong Li,et al.  Advanced Functional Materials , 2011 .

[42]  P. Pissis,et al.  Electrical/dielectric properties and conduction mechanism in melt processed polyamide/multi-walled carbon nanotubes composites , 2009 .

[43]  Z. Bao,et al.  A review of fabrication and applications of carbon nanotube film-based flexible electronics. , 2013, Nanoscale.

[44]  Michael F. Rubner,et al.  pH-Dependent Thickness Behavior of Sequentially Adsorbed Layers of Weak Polyelectrolytes , 2000 .

[45]  H. Ohta,et al.  Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors , 2004, Nature.

[46]  G. Rutledge,et al.  Mechanical and tribological properties of electrospun PA 6(3)T fiber mats , 2012 .

[47]  Shuo Chen,et al.  Layer-by-layer assembly of all carbon nanotube ultrathin films for electrochemical applications. , 2009, Journal of the American Chemical Society.

[48]  Paula T. Hammond,et al.  Engineering materials layer‐by‐layer: Challenges and opportunities in multilayer assembly , 2011 .

[49]  Y. Shao-horn,et al.  Rapid fabrication of thick spray-layer-by-layer carbon nanotube electrodes for high power and energy devices , 2013 .