Last results of MADRAS, a space active optics demonstrator

The goal of the MADRAS project (Mirror Active, Deformable and Regulated for Applications in Space) is to highlight the interest of Active Optics for the next generation of space telescope and instrumentation. Wave-front errors in future space telescopes will mainly come from thermal dilatation and zero gravity, inducing large lightweight primary mirrors deformation. To compensate for these effects, a 24 actuators, 100 mm diameter deformable mirror has been designed to be inserted in a pupil relay. Within the project, such a system has been optimized, integrated and experimentally characterized. The system is designed considering wave-front errors expected in 3m-class primary mirrors, and taking into account space constraints such as compactness, low weight, low power consumption and mechanical strength. Finite Element Analysis allowed an optimization of the system in order to reach a precision of correction better than 10 nm rms. A dedicated test-bed has been designed to fully characterize the integrated mirror performance in representative conditions. The test set up is made of three main parts: a telescope aberrations generator, a correction loop with the MADRAS mirror and a Shack-Hartman wave-front sensor, and PSF imaging. In addition, Fizeau interferometry monitors the optical surface shape. We have developed and characterized an active optics system with a limited number of actuators and a design fitting space requirements. All the conducted tests tend to demonstrate the efficiency of such a system for a real-time, in situ wave-front. It would allow a significant improvement for future space telescopes optical performance while relaxing the specifications on the others components.

[1]  R. Noll.  Zernike polynomials and atmospheric turbulence , 1976 .

[2]  G. Lemaitre,et al.  Active Optics: Vase or Meniscus Multimode Mirrors and Degenerated Monomode Configurations , 2005 .

[3]  Brian Keith McComas.  Configurable adaptive optics for the correction of space-based optical systems , 2002 .

[4]  James E. Pearson,et al.  Deformable Mirrors For All Seasons And Reasons , 1981, Optics & Photonics.

[5]  S. BRODETSKY,et al.  Theory of Plates and Shells , 1941, Nature.

[6]  Peter Hartmann,et al.  Forty years of ZERODUR mirror substrates for astronomy: review and outlook , 2008, Astronomical Telescopes + Instrumentation.

[7]  Lothar Noethe,et al.  Active Optics: I. A System for Optimizing the Optical Quality and Reducing the Costs of Large Telescopes , 1987 .

[8]  David W. Miller,et al.  Integrated modeling for design of lightweight, active mirrors , 2011 .

[9]  Keith Patterson,et al.  Thin deformable mirrors for a reconfigurable space telescope , 2012 .

[10]  J. Nelson,et al.  Stressed mirror polishing. 1: A technique for producing nonaxisymmetric mirrors. , 1980, Applied optics.

[11]  J. C. Dainty,et al.  A low cost adaptive optics system using a membrane mirror. , 2000, Optics express.

[12]  M. Ferrari.  Development of a variable curvature mirror for the delay lines of the VLT interferometer , 1998 .

[13]  Paul A. Lightsey,et al.  James Webb Space Telescope: large deployable cryogenic telescope in space , 2012 .

[14]  Joseph M. Howard,et al.  Space telescope design considerations , 2012 .

[15]  Wesley A. Traub,et al.  Advanced Technology Large-Aperture Space Telescope: science drivers and technology developments , 2012 .