Role of Multiwalled Carbon Nanotubes Localization on Morphology Development of PMMA/PS/PP Ternary Blends

In this work, we studied the parameters affecting the localization of multiwalled carbon nanotubes (MWCNTs) and its impact on morphology development of poly(methyl methacrylate)/polystyrene/polypropylene (PMMA/PS/PP) ternary blends, which originally have a thermodynamically preferred core–shell type morphology. We compared the results with the morphological prediction based on the thermodynamic approach. The MWCNTs localization and morphological features of nanocomposite samples were studied by means of melt linear viscoelastic experiments together with electron microscopy results. It was found that at 0.5 wt% of MWCNTs the original core–shell type morphology of the ternary blend samples almost remained intact. and this observation was independent of the sequence of feeding. At 1 wt% of MWCNTs, the core–shell morphology was retained only for those nanocomposite samples prepared using the sequential feeding mode. In addition, it was demonstrated that the thermodynamic predictions could be utilized for the nanocomposites containing low MWCNTs contents. However, this was not true for the nanocomposites with higher MWCNTs contents due to the predominating role of viscoelastic properties of the PS shell.

[1]  M. Vahdati,et al.  Role of multiwalled carbon nanotubes (MWCNTs) on rheological, thermal and electrical properties of PC/ABS blend , 2015 .

[2]  P. Cassagnau,et al.  Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends , 2014 .

[3]  A. Cayla,et al.  Electrical and thermal conductivities of multiwalled carbon nanotubes-reinforced high performance polymer nanocomposites , 2013 .

[4]  T. McNally,et al.  Localization of MWCNTs in PET/LDPE blends , 2013 .

[5]  Meysam Rahmat,et al.  Carbon nanotube–polymer interactions in nanocomposites: A review , 2011 .

[6]  H. Nazockdast,et al.  Linear and nonlinear melt rheology and extrudate swell of acrylonitrile‐butadiene‐styrene and organoclay‐filled acrylonitrile‐butadiene‐styrene nanocomposite , 2010 .

[7]  S. Ravati,et al.  Low percolation threshold conductive device derived from a five-component polymer blend , 2010 .

[8]  D. Tasis,et al.  Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties , 2010 .

[9]  H. Nazockdast,et al.  Study on morphology and viscoelastic properties of PP/PET/SEBS ternary blend and their fibers , 2009 .

[10]  I. Kelnar,et al.  Effect of montmorillonite on structure and properties of nanocomposite with PA6/PS/elastomer matrix , 2009 .

[11]  P. Carreau,et al.  Rheological properties and percolation in suspensions of multiwalled carbon nanotubes in polycarbonate , 2009 .

[12]  H. Nazockdast,et al.  Morphology Development and Melt Linear Viscoelastic Properties of (PA6/PP/PS) Ternary Blend Systems , 2009 .

[13]  P. Cassagnau,et al.  Uneven distribution of nanoparticles in immiscible fluids: Morphology development in polymer blends , 2009 .

[14]  L. Robeson,et al.  Polymer nanotechnology: Nanocomposites , 2008 .

[15]  H. Nazockdast,et al.  Linear and nonlinear melt-state viscoelastic properties of polypropylene/organoclay nanocomposites , 2008 .

[16]  M. Moniruzzaman,et al.  Polymer Nanocomposites Containing Carbon Nanotubes , 2006 .

[17]  N. Demarquette,et al.  Study of Morphologies of PMMA/PP/PS Ternary Blends , 2006 .

[18]  Mehdi Hojjati,et al.  Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview , 2006 .

[19]  G. Groeninckx,et al.  Co-continuous and encapsulated three phase morphologies in uncompatibilized and reactively compatibilized polyamide 6/polypropylene/polystyrene ternary blends using two reactive precursors , 2005 .

[20]  M. Endo,et al.  Processing and characterization of epoxy nanocomposites reinforced by cup-stacked carbon nanotubes , 2005 .

[21]  Karl I. Jacob,et al.  Experimental trends in polymer nanocomposites—a review , 2005 .

[22]  Eunyoung Kim,et al.  Effects of dispersed phase composition on thermoplastic polyolefins , 2004 .

[23]  Min Soo Kim,et al.  Effects of the blending sequence in polyolefin ternary blends , 2004 .

[24]  M. Huneault,et al.  Composite droplets with core/shell morphologies prepared from HDPE/PS/PMMA ternary blends by twin‐screw extrusion , 2004 .

[25]  Isaac M. Daniel,et al.  Characterization and modeling of mechanical behavior of polymer/clay nanocomposites , 2003 .

[26]  B. D. Favis,et al.  Factors influencing encapsulation behavior in composite droplet-type polymer blends , 2003 .

[27]  H. Nazokdast,et al.  Study on morphology of ternary polymer blends. II. Effect of composition , 2001 .

[28]  Y. Mamunya.  Polymer blends filled with carbon black : Structure and electrical properties , 2001 .

[29]  J. Reignier,et al.  Control of the Subinclusion Microstructure in HDPE/PS/PMMA Ternary Blends , 2000 .

[30]  Sang Yong Kim,et al.  A linear viscoelastic model of matrix/core–shell modifier polymer blends , 2000 .

[31]  I. Luzinov,et al.  Dependence of phase morphology and mechanical properties of PS/SBR/PE ternary blends on composition: transition from core-shell to triple-phase continuity structures , 2000 .

[32]  D. Meier,et al.  Prediction and manipulation of the phase morphologies of multiphase polymer blends: II. Quaternary systems , 1997 .

[33]  Philippe Guégan,et al.  Compatibilizers for Melt Blending: Premade Block Copolymers† , 1996 .

[34]  Y. Hsieh.  Liquid Transport in Fabric Structures , 1995 .

[35]  A. Gupta,et al.  Melt rheology and morphology of PP/SEBS/PC ternary blend , 1993 .

[36]  B. D. Favis,et al.  Factors influencing structure formation and phase size in an immiscible polymer blend of polycarbonate and polypropylene prepared by twin-screw extrusion , 1991 .

[37]  V. H. Watkins,et al.  Poly(Phenylene oxide)/polyamide blends via reactive extrusion , 1990 .

[38]  V. H. Watkins,et al.  Effect of interfacial forces on polymer blend morphologies , 1988 .

[39]  D. R. Paul.  Fibers from Polymer Blends , 1978 .

[40]  H. Vanoene.  Modes of dispersion of viscoelastic fluids in flow , 1972 .