Enhancing transparency on a ball screw teleoperation robot system using a novel velocity estimation method with FPGA

Applications are using force sensation in order to estimate real contact with the environment. In a bilateral control, force feedback is needed, but a force sensor is not suitable. Hence, the force sensation is improved by using a new velocity estimation that is programmed into the FPGA. The short processing time used in the FPGA improves the force sensation in the bilateral ball screw systems. The force sensation results are higher and faster than provided by the conventional method.

[1]  Kouhei Ohnishi,et al.  Motion control for advanced mechatronics , 1996 .

[2]  Kiyoshi Ohishi,et al.  Control of Interaction Force of Twin Direct-Drive Motor System Using Variable Wire Rope Tension With Multisensor Integration , 2012, IEEE Transactions on Industrial Electronics.

[3]  Kouhei Ohnishi,et al.  Transmission of force sensation by environment quarrier based on multilateral control , 2007, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[4]  Kenzo Kamiyama,et al.  A Microprocessor-Controlled High-Accuracy Wide-Range Speed Regulator for Motor Drives , 1982, IEEE Transactions on Industrial Electronics.

[5]  Kiyoshi Ohishi,et al.  Force Control of Human–Robot Interaction Using Twin Direct-Drive Motor System Based on Modal Space Design , 2010, IEEE Transactions on Industrial Electronics.

[6]  Kouhei Ohnishi,et al.  Implementation of Bilateral Control System Based on Acceleration Control Using FPGA for Multi-DOF Haptic Endoscopic Surgery Robot , 2009, IEEE Transactions on Industrial Electronics.

[7]  Dong Sun,et al.  A simple nonlinear velocity estimator for high-performance motion control , 2005, IEEE Transactions on Industrial Electronics.

[8]  Chowarit Mitsantisuk,et al.  Velocity control based on a wide range of velocity estimation in FPGA (産業計測制御研究会 産業計測制御一般) , 2011 .

[9]  W.E. Dixon,et al.  A new continuously differentiable friction model for control systems design , 2005, Proceedings, 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics..

[10]  Kouhei Ohnishi,et al.  A Wide-Range Velocity Measurement Method for Motion Control , 2009, IEEE Transactions on Industrial Electronics.

[11]  Kouhei Ohnishi,et al.  Improvement of Performances in Bilateral Teleoperation by Using FPGA , 2007, IEEE Transactions on Industrial Electronics.

[12]  Toshiyuki Murakami,et al.  Torque sensorless control in multidegree-of-freedom manipulator , 1993, IEEE Trans. Ind. Electron..

[13]  K. Ohnishi,et al.  A velocity measurement method for acceleration control , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[14]  Yuichi Matsumoto,et al.  Realization of "law of action and reaction" by multilateral control , 2004, The 8th IEEE International Workshop on Advanced Motion Control, 2004. AMC '04..

[15]  Yuichi Matsumoto,et al.  An analysis and design of bilateral control based on disturbance observer , 2003, IEEE International Conference on Industrial Technology, 2003.

[16]  Toshiyuki Murakami,et al.  Advanced motion control in robotics , 1989, 15th Annual Conference of IEEE Industrial Electronics Society.