MEMS Scale PVDF-TrFE-Based Piezoelectric Energy Harvesters

This paper presents the design, the fabrication, and the performance characterization of microelectromechanical systems (MEMS) scale cantilever-type piezoelectric energy harvesters (PEHs) that utilize the piezoelectric polymer polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE). Ranges are determined for device dimensions according to the calculations based on mathematical models. Designed devices were fabricated using standard MEMS fabrication techniques. Electrodes were formed with sputtered Al and Ti/Al thin films, and a 1.3-μm-thick PVDF-TrFE film was deposited using spin coating. Cantilevers were suspended using a two-step process: backside DRIE to perform the bulk etch, followed by XeF2 gaseous etch for the final release. Remnant polarization and coercive field of the fabricated devices were measured as 6.1 μC/cm2 and 74.9 V/μm, respectively. Piezoelectric performances were evaluated by a press-and-release type of measurement. For these measurements, custom-made probe tips attached to micropositioners were used. Based on the experimental results, maximum power output was calculated as 35.1 pW for a peak tip displacement of 500 μm from a 1200 μm × 300 μm cantilever, which corresponds to a power output density of 97.5 pW/mm2. The proposed method has the potential to create the PEHs that are monolithically integrated with complementary metal-oxide-semiconductor circuits and lead to self-sustained low power electronics.

[1]  Wei-Hsin Liao,et al.  Analysis and design of a self-powered piezoelectric microaccelerometer , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2]  S. Johansson,et al.  Multilayer piezoelectric copolymer transducers , 2005, IEEE Ultrasonics Symposium, 2005..

[3]  Anthony Marin,et al.  Multiple cell configuration electromagnetic vibration energy harvester , 2011 .

[4]  C. K. Lee,et al.  Piezoelectric MEMS generators fabricated with an aerosol deposition PZT thin film , 2009 .

[5]  Paul K. Wright,et al.  Modeling, fabrication and stress compensation of an epitaxial thin film piezoelectric microscale energy scavenging device , 2009 .

[6]  Sang-Gook Kim,et al.  MEMS power generator with transverse mode thin film PZT , 2005 .

[7]  H. Ohigashi,et al.  Piezoelectricity and related properties of vinylidene fluoride and trifluoroethylene copolymers , 1986 .

[8]  Skandar Basrour,et al.  Integrated power harvesting system including a MEMS generator and a power management circuit , 2008 .

[9]  Kui Yao,et al.  Comparative investigation of the structure and properties of ferroelectric poly(vinylidene fluoride) and poly(vinylidene fluoride–trifluoroethylene) thin films crystallized on substrates , 2010 .

[10]  Kui Yao,et al.  Fabrication of piezoelectric polymer multilayers on flexible substrates for energy harvesting , 2013 .

[11]  Paul K. Wright,et al.  A STUDY OF AMBIENT VIBRATIONS FOR PIEZOELECTRIC ENERGY CONVERSION , 2009 .

[12]  P. Regtien,et al.  Poling of VDF/TrFe copolymers using a step-wise method , 1996, 9th International Symposium on Electrets (ISE 9) Proceedings.

[13]  S. H. Kim,et al.  Micromachined PZT cantilever based on SOI structure for low frequency vibration energy harvesting , 2009 .

[14]  H. Kahn,et al.  Wafer-level mechanical characterization of silicon nitride MEMS , 2005, Journal of Microelectromechanical Systems.

[15]  Urban Simu,et al.  Monolithic fabrication of multilayer P(VDF-TrFE) cantilevers , 2008 .

[16]  Paul K. Wright,et al.  A piezoelectric vibration based generator for wireless electronics , 2004 .

[17]  Jan M. Rabaey,et al.  A study of low level vibrations as a power source for wireless sensor nodes , 2003, Comput. Commun..

[18]  Kui Yao,et al.  Fabrication of piezoelectric P(VDF-TrFE) microcantilevers by wafer-level surface micromachining , 2013 .

[19]  L. You,et al.  Universal Ferroelectric Switching Dynamics of Vinylidene Fluoride-trifluoroethylene Copolymer Films , 2014, Scientific Reports.

[20]  Y. V. Andel,et al.  Vibration energy harvesting with aluminum nitride-based piezoelectric devices , 2009 .

[21]  Stefan Johansson,et al.  Gentle dry etching of P(VDF-TrFE) multilayer micro actuator structures by use of an inductive coupled plasma , 2008 .

[22]  Danick Briand,et al.  The realization and performance of vibration energy harvesting MEMS devices based on an epitaxial piezoelectric thin film , 2011 .

[23]  H. Kahn,et al.  A MEMS-Based Evaluation of the Mechanical Properties of Metallic Thin Films , 2007, Journal of Microelectromechanical Systems.

[24]  Jan M. Rabaey,et al.  Improving power output for vibration-based energy scavengers , 2005, IEEE Pervasive Computing.

[25]  L. E. Cross,et al.  Piezoelectric, dielectric, and elastic properties of poly(vinylidene fluoride/trifluoroethylene) , 1993 .

[26]  V. Pop,et al.  Vacuum-packaged piezoelectric vibration energy harvesters: damping contributions and autonomy for a wireless sensor system , 2010 .

[27]  H. Wikle,et al.  The design, fabrication and evaluation of a MEMS PZT cantilever with an integrated Si proof mass for vibration energy harvesting , 2008 .

[28]  S. Basrour,et al.  Highly efficient piezoelectric micro harvester for low level of acceleration fabricated with a CMOS compatible process , 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

[29]  Lu Dong,et al.  Fabrication and performance of MEMS-based piezoelectric power generator for vibration energy harvesting , 2006, Microelectron. J..

[30]  Kui Yao,et al.  Piezoelectric polymer multilayer on flexible substrate for energy harvesting , 2013, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[31]  H. Ohigashi,et al.  Ferroelectric Copolymers of Vinylidenefluoride and Trifluoroethylene with a Large Electromechanical Coupling Factor , 1982 .