A variable kinematic doubly-curved MITC9 shell element for the analysis of laminated composites

ABSTRACT The present article considers the linear static analysis of composite shell structures with double-curvature geometry by means of a shell finite element with variable through-the-thickness kinematic. The refined models used are grouped in the Unified Formulation by Carrera (CUF) and they permit the distribution of displacements and stresses along the thickness of the multilayered shell to be accurately described. The shell element has nine nodes and the mixed interpolation of tensorial components (MITC) method is used to contrast the membrane and shear locking phenomenon. The governing equations are derived from the principle of virtual displacement (PVD) and the finite element method (FEM) is employed to solve them. Cross-ply spherical shells with simply-supported edges and subjected to bi-sinusoidal pressure are analyzed. Various laminations, thickness ratios, and curvature ratios are considered. The results, obtained with different theories contained in the CUF, are compared with both the elasticity solutions given in the literature and the analytical solutions obtained using the CUF and the Navier’s method. From the analysis, one can conclude that the shell element based on the CUF is very efficient and its use is mandatory with respect to the classical models in the study of composite structures. Finally, shells with different lamination, boundary conditions, and loads are also analyzed using high-order layer-wise theories in order to provide FEM benchmark solutions.

[1]  E. Ramm,et al.  On the physical significance of higher order kinematic and static variables in a three-dimensional shell formulation , 2000 .

[2]  J. C. Simo,et al.  A CLASS OF MIXED ASSUMED STRAIN METHODS AND THE METHOD OF INCOMPATIBLE MODES , 1990 .

[3]  Eduardo N. Dvorkin,et al.  A formulation of general shell elements—the use of mixed interpolation of tensorial components† , 1986 .

[4]  T. S. Sankar,et al.  The optimal design of lathe spindles under experimentally measured random cutting force excitations , 1987 .

[5]  J. F. Abel,et al.  Static and Dynamic Finite Element Analysis of Sandwich Structures , 1968 .

[6]  Erasmo Carrera,et al.  Analysis of thick isotropic and cross-ply laminated plates by radial basis functions and a Unified Formulation , 2011 .

[7]  Erasmo Carrera,et al.  Analysis of laminated shells by a sinusoidal shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformations , 2011 .

[8]  Erasmo Carrera,et al.  Analysis of laminated doubly-curved shells by a layerwise theory and radial basis functions collocation, accounting for through-the-thickness deformations , 2011 .

[9]  Ferdinando Auricchio,et al.  A mixed‐enhanced finite‐element for the analysis of laminated composite plates , 1999 .

[10]  E. Ramm,et al.  A unified approach for shear-locking-free triangular and rectangular shell finite elements , 2000 .

[11]  J. H. Argyris,et al.  Matrix displacement analysis of plates and shells , 1966 .

[12]  Erasmo Carrera,et al.  Multilayered Shell Theories Accounting for Layerwise Mixed Description, Part 2: Numerical Evaluations , 1999 .

[13]  Claudia Chinosi,et al.  Mixed‐interpolated elements for thin shells , 1998 .

[14]  J. Reddy.  Mechanics of laminated composite plates and shells : theory and analysis , 1996 .

[15]  Anthony N. Palazotto,et al.  Nonlinear Analysis of Shell Structures , 1992 .

[16]  Marco Di Sciuva,et al.  A class of multilayered anisotropic plate elements including the effects of transverse shear deformability. , 1985 .

[17]  Olivier Polit,et al.  A new laminated triangular finite element assuring interface continuity for displacements and stresses , 1997 .

[18]  E. Hinton,et al.  A study of quadrilateral plate bending elements with ‘reduced’ integration , 1978 .

[19]  J. Reddy,et al.  THEORIES AND COMPUTATIONAL MODELS FOR COMPOSITE LAMINATES , 1994 .

[20]  K. Wisniewski,et al.  Nine-node shell elements with 6 dofs/node based on two-level approximations. Part I , 2008 .

[21]  Huang Hou-Cheng,et al.  Membrane locking and assumed strain shell elements , 1987 .

[22]  Richard M. Barker,et al.  A Finite-Element Analysis Including Transverse Shear Effects for Applications to Laminated Plates , 1971 .

[23]  K. Bathe,et al.  Mixed-interpolated elements for Reissner–Mindlin plates , 1989 .

[24]  N. N. Huang,et al.  Influence of shear correction factors in the higher order shear deformation laminated shell theory , 1994 .

[25]  Ekkehard Ramm,et al.  Nonlinear shell formulations for complete three-dimensional constitutive laws including composites and laminates , 1994 .

[26]  H. Parisch,et al.  A critical survey of the 9-node degenerated shell element with special emphasis on thin shell application and reduced integration , 1979 .

[27]  Koganti M. Rao,et al.  Analysis of thick laminated anisotropic composite plates by the finite element method , 1990 .

[28]  Frédéric Dau,et al.  An efficient C1 finite element with continuity requirements for multilayered/sandwich shell structures , 2004 .

[29]  Raghu Natarajan,et al.  Finite element analysis of laminated composite plates , 1979 .

[30]  A. B. Sabir,et al.  The applications of finite elements to large deflection geometrically nonlinear behaviour of cylindrical shells , 1972 .

[31]  E. Hinton,et al.  A nine node Lagrangian Mindlin plate element with enhanced shear interpolation , 1984 .

[32]  L. Della Croce,et al.  Hierarchic finite elements for thin Naghdi shell model , 1998 .

[33]  Peter M. Pinsky,et al.  A multi-director formulation for nonlinear elastic-viscoelastic layered shells , 1986 .

[34]  Giuseppe Davi,et al.  Stress Fields in General Composite Laminates , 1996 .

[35]  E. Carrera.  Theories and Finite Elements for Multilayered Plates and Shells:A Unified compact formulation with numerical assessment and benchmarking , 2003 .

[36]  Marjorie Gardner,et al.  Developments , 1963 .

[37]  Douglas N. Arnold,et al.  Locking-free finite element methods for shells , 1997, Math. Comput..

[38]  E. Ramm,et al.  Shear deformable shell elements for large strains and rotations , 1997 .

[39]  D. A. Kross,et al.  Finite-Element Analysis of Thin Shells , 1968 .

[40]  Erasmo Carrera,et al.  Multilayered shell finite element with interlaminar continuous shear stresses : a refinement of the Reissner-Mindlin formulation , 2000 .

[41]  Erasmo Carrera.  A class of two-dimensional theories for anisotropic multilayered plates analysis , 1995 .

[42]  C. Chinosi,et al.  Remarks on partial selective reduced integration method for Reissner–Mindlin plate problem , 1999 .

[43]  R. Macneal.  Perspective on finite elements for shell analysis , 1997 .

[44]  Olivier Polit,et al.  A multilayered/sandwich triangular finite element applied to linear and non-linear analyses , 2002 .

[45]  M. Touratier,et al.  A rectangular finite element for analysing composite multilayered shallow shells in statics, vibration and buckling , 1993 .

[46]  K. M. Liew,et al.  Differential quadrature method for thick symmetric cross-ply laminates with first-order shear flexibility , 1996 .

[47]  E. Carrera.  Developments, ideas, and evaluations based upon Reissner’s Mixed Variational Theorem in the modeling of multilayered plates and shells , 2001 .

[48]  António J.M. Ferreira,et al.  Non-linear analysis of sandwich shells: the effect of core plasticity , 2000 .

[49]  Phill-Seung Lee,et al.  Towards improving the MITC9 shell element , 2003 .

[50]  Olivier Polit,et al.  C1 plate and shell finite elements for geometrically nonlinear analysis of multilayered structures , 2006 .

[51]  Charles W. Bert,et al.  Differential Quadrature Analysis of Free Vibration of Symmetric Cross-Ply Laminates with Shear Deformation and Rotatory Inertia , 1995 .

[52]  K. Bathe,et al.  The MITC7 and MITC9 Plate bending elements , 1989 .

[53]  Tarun Kant,et al.  Large amplitude free vibration analysis of cross-ply composite and sandwich laminates with a refined theory and C° finite elements , 1994 .

[54]  Erasmo Carrera,et al.  Multilayered Shell Theories Accounting for Layerwise Mixed Description, Part 1: Governing Equations , 1999 .

[55]  D. Chapelle,et al.  The Finite Element Analysis of Shells - Fundamentals , 2003 .

[56]  Franz G. Rammerstorfer,et al.  Composite and Sandwich Shells , 1992 .

[57]  M. L. Bucalém,et al.  Higher‐order MITC general shell elements , 1993 .

[58]  Gaetano Giunta,et al.  Hierarchical modelling of doubly curved laminated composite shells under distributed and localised loadings , 2011 .

[59]  E. Reissner.  On a Certain Mixed Variational Theorem and on Laminated Elastic Shell Theory , 1987 .

[60]  Philippe G. Ciarlet,et al.  Another approach to linear shell theory and a new proof of Korn's inequality on a surface , 2005 .

[61]  Medhat A. Haroun,et al.  Reduced and selective integration techniques in the finite element analysis of plates , 1978 .

[62]  D. Malkus,et al.  Mixed finite element methods—reduced and selective integration techniques: a unification of concepts , 1990 .

[63]  Xiaoping Shu,et al.  A refined theory of laminated shells with higher-order transverse shear deformation , 1997 .

[64]  Paul Seide,et al.  An approximate method for prediction of transverse shear stresses in a laminated shell , 1987 .

[65]  P. M. Naghdi,et al.  The Theory of Shells and Plates , 1973 .

[66]  A. Noor,et al.  Assessment of Computational Models for Multilayered Composite Shells , 1990 .

[67]  O. C. Zienkiewicz,et al.  A refined higher-order C° plate bending element , 1982 .

[68]  Alexander Tessler,et al.  A higher-order plate theory with ideal finite element suitability , 1991 .

[69]  T. Hughes,et al.  Finite Elements Based Upon Mindlin Plate Theory With Particular Reference to the Four-Node Bilinear Isoparametric Element , 1981 .

[70]  O. C. Zienkiewicz,et al.  Reduced integration technique in general analysis of plates and shells , 1971 .

[71]  Olivier Polit,et al.  High-order triangular sandwich plate finite element for linear and non-linear analyses , 2000 .

[72]  K. Bathe,et al.  A four‐node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation , 1985 .

[73]  E. Carrera.  Theories and finite elements for multilayered, anisotropic, composite plates and shells , 2002 .

[74]  Erasmo Carrera,et al.  A family of shear-deformable shell finite elements for composite structures , 2000 .

[75]  Ahmed K. Noor,et al.  Finite element analysis of anisotropic plates , 1977 .

[76]  N. Rogacheva.  The Theory of Piezoelectric Shells and Plates , 1994 .

[77]  Hidenori Murakami,et al.  Laminated Composite Plate Theory With Improved In-Plane Responses , 1986 .

[78]  J. Reddy.  An evaluation of equivalent-single-layer and layerwise theories of composite laminates , 1993 .

[79]  Ahmed K. Noor,et al.  Three-dimensional solutions of laminated cylinders , 1974 .

[80]  A. Mawenya,et al.  Finite element bending analysis of multilayer plates , 1974 .