Recent advances on the mechanical behavior of zinc based biodegradable metals focusing on the strain softening phenomenon.

[1]  Ruixue Zhang,et al.  Microstructures, mechanical properties and in vitro corrosion behavior of biodegradable Zn alloys microalloyed with Al, Mn, Cu, Ag and Li elements , 2022, Journal of Materials Science & Technology.

[2]  K. Popat,et al.  Correction to: Balloon expandable coronary stent materials: a systematic review focused on clinical success , 2022, In vitro models.

[3]  Yufeng Zheng,et al.  A Biodegradable Magnesium Alloy Vascular Stent Structure: Design, Optimisation and Evaluation. , 2022, Acta biomaterialia.

[4]  J. Cui,et al.  Investigation on microstructures, mechanical properties and in vitro corrosion behavior of novel biodegradable Zn-2Cu-0.01Ti-xLi alloys , 2021 .

[5]  M. Dargusch,et al.  Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: Current status, challenges, and future prospects. , 2021, Biomaterials.

[6]  Hua-nan Liu,et al.  Effect of ECAP temperature on formation of triple heterogeneous microstructure and mechanical properties of Zn–1Cu alloy , 2021 .

[7]  D. Kent,et al.  Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compression , 2021, Materials Science and Engineering: A.

[8]  M. Wan,et al.  Effect of equal-channel angular pressing on microstructural evolution, mechanical property and biodegradability of an ultrafine-grained zinc alloy , 2021 .

[9]  H. Clemens,et al.  How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W , 2021 .

[10]  X. Zhu,et al.  Ultrafine‐grained Zn‐0.45Li alloy with enhanced mechanical property, degradation behavior and cytocompatibility prepared by hot extrusion and multi‐pass drawing , 2021, Materialwissenschaft und Werkstofftechnik.

[11]  C. Tardei,et al.  Biodegradable Mg alloys for orthopedic implants – A review , 2021, Journal of Magnesium and Alloys.

[12]  Di Zhang,et al.  Enhanced strengthening and hardening via self-stabilized dislocation network in additively manufactured metals , 2021, Materials Today.

[13]  Shineng Sun,et al.  Microstructure evolution of as-extruded Zn–0.62Mn alloys during room temperature compression , 2021, Materials Science and Technology.

[14]  Zhang-Zhi Shi,et al.  Hierarchical microstructure and two-stage corrosion behavior of a high-performance near-eutectic Zn-Li alloy , 2021, Journal of Materials Science & Technology.

[15]  M. Dargusch,et al.  Binary Zn–Ti alloys for orthopedic applications: Corrosion and degradation behaviors, friction and wear performance, and cytotoxicity , 2021 .

[16]  Yufeng Zheng,et al.  Zn0.8Li0.1Sr-a biodegradable metal with high mechanical strength comparable to pure Ti for the treatment of osteoporotic bone fractures: In vitro and in vivo studies. , 2021, Biomaterials.

[17]  Yufeng Zheng,et al.  Biodegradable ZnLiCa ternary alloys for critical-sized bone defect regeneration at load-bearing sites: In vitro and in vivo studies , 2021, Bioactive materials.

[18]  Yuping Ren,et al.  Textural evolution and improved ductility in Zn-0.2Mg-0.8Mn (wt%) alloys at different extrusion temperatures , 2021 .

[19]  Yongchun Zou,et al.  Grain boundary co-segregation in magnesium alloys with multiple substitutional elements , 2021 .

[20]  A. Deschamps,et al.  Solute cluster evolution during deformation and high strain hardening capability in naturally aged Al–Zn–Mg alloy , 2021 .

[21]  M. Dargusch,et al.  Biodegradable Zn–3Cu and Zn–3Cu–0.2Ti alloys with ultrahigh ductility and antibacterial ability for orthopedic applications , 2021 .

[22]  Yufeng Zheng,et al.  Zn-0.4Li alloy shows great potential for the fixation and healing of bone fractures at load-bearing sites , 2021 .

[23]  D. Kent,et al.  Influence of strain rate and crystallographic orientation on dynamic recrystallization of pure Zn during room-temperature compression , 2021 .

[24]  J. Kubásek,et al.  Microstructural, mechanical, in vitro corrosion and biological characterization of an extruded Zn-0.8Mg-0.2Sr (wt%) as an absorbable material. , 2021, Materials science & engineering. C, Materials for biological applications.

[25]  Yuan Wu,et al.  Revealing the influence of Zr micro-alloying and hot extrusion on a novel high ductility Zn–1Mg alloy , 2021 .

[26]  Zhenlun Song,et al.  Ultrafine- and uniform-grained biodegradable Zn-0.5Mn alloy: Grain refinement mechanism, corrosion behavior, and biocompatibility in vivo. , 2021, Materials science & engineering. C, Materials for biological applications.

[27]  Hua-nan Liu,et al.  Revealing the effect of minor Ca and Sr additions on microstructure evolution and mechanical properties of Zn-0.6 Mg alloy during multi-pass equal channel angular pressing , 2020 .

[28]  R. Reddy,et al.  Synthesis, mechanical properties, and in vitro corrosion behavior of biodegradable Zn–Li–Cu alloys , 2020 .

[29]  M. Meyers,et al.  Shear localization in metallic materials at high strain rates , 2020 .

[30]  G. Yuan,et al.  Biodegradable Zn-1.5Cu-1.5Ag alloy with anti-aging ability and strain hardening behavior for cardiovascular stents. , 2020, Materials science & engineering. C, Materials for biological applications.

[31]  Hua-nan Liu,et al.  Multi-interactions of dislocations and refined microstructure in a high strength and toughness Zn-Mg-Mn alloy , 2020 .

[32]  Lu-ning Wang,et al.  Development of a high-strength Zn-Mn-Mg alloy for ligament reconstruction fixation. , 2020, Acta biomaterialia.

[33]  C. Wen,et al.  Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives , 2020, Bioactive materials.

[34]  E. Sato,et al.  Diffusional and dislocation accommodation mechanisms in superplastic materials , 2020 .

[35]  M. Dargusch,et al.  Development of biodegradable Zn-1Mg-0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications. , 2020, Acta biomaterialia.

[36]  M. Dargusch,et al.  Biodegradable ternary Zn-3Ge-0.5X (X=Cu, Mg, and Fe) alloys for orthopedic applications. , 2020, Acta biomaterialia.

[37]  W. Pachla,et al.  Structural and mechanical aspects of hypoeutectic Zn–Mg binary alloys for biodegradable vascular stent applications , 2020, Bioactive materials.

[38]  C. Boehlert,et al.  High-pressure torsion processing of Zn–3Mg alloy and its hybrid counterpart: A comparative study , 2020 .

[39]  J. Drahokoupil,et al.  Extrusion of the biodegradable ZnMg0.8Ca0.2 alloy - The influence of extrusion parameters on microstructure and mechanical characteristics. , 2020, Journal of the mechanical behavior of biomedical materials.

[40]  Zhang-Zhi Shi,et al.  Adjusting comprehensive properties of biodegradable Zn-Mn alloy through solution heat-treatment , 2020 .

[41]  D. Kent,et al.  Dynamic recrystallization of pure zinc during high strain-rate compression at ambient temperature , 2020 .

[42]  T. Langdon,et al.  A Novel High-Strength Zn-3Ag-0.5Mg Alloy Processed by Hot Extrusion, Cold Rolling, or High-Pressure Torsion , 2020, Metallurgical and Materials Transactions A.

[43]  J. Drahokoupil,et al.  ZnMg0.8Ca0.2 (wt%) biodegradable alloy – The influence of thermal treatment and extrusion on microstructural and mechanical characteristics , 2020 .

[44]  S. Qu,et al.  On the grain size dependent working hardening behaviors of severe plastic deformation processed metals , 2020 .

[45]  Yufeng Zheng,et al.  In vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications. , 2020, Acta biomaterialia.

[46]  Yufeng Zheng,et al.  Microstructure, mechanical properties and creep behaviour of extruded Zn-xLi (x = 0.1, 0.3 and 0.4) alloys for biodegradable vascular stent applications , 2020, Materials Science and Engineering: A.

[47]  L. Qin,et al.  Biodegradable Magnesium‐Based Implants in Orthopedics—A General Review and Perspectives , 2020, Advanced science.

[48]  Lu-ning Wang,et al.  Design biodegradable Zn alloys: Second phases and their significant influences on alloy properties , 2020, Bioactive materials.

[49]  C. Wen,et al.  A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications. , 2020, Acta biomaterialia.

[50]  J. Drelich,et al.  Towards revealing key factors in mechanical instability of bioabsorbable Zn-based alloys for intended vascular stenting. , 2020, Acta biomaterialia.

[51]  Yufeng Zheng,et al.  Alloying design of biodegradable zinc as promising bone implants for load-bearing applications , 2020, Nature Communications.

[52]  Zhang-Zhi Shi,et al.  Microstructure evolution of a high-strength low-alloy Zn–Mn–Ca alloy through casting, hot extrusion and warm caliber rolling , 2020 .

[53]  C. Boehlert,et al.  Effect of post-deformation annealing on the microstructure and micro-mechanical behavior of Zn–Mg hybrids processed by High-Pressure Torsion , 2020 .

[54]  Zhang-Zhi Shi,et al.  Microstructure and mechanical properties of extruded and caliber rolled biodegradable Zn-0.8Mn-0.4Ag alloy with high ductility , 2020, Materials Science and Engineering: A.

[55]  J. Drelich,et al.  The effects of alloying with Cu and Mn and thermal treatments on the mechanical instability of Zn-0.05Mg alloy. , 2020, Materials science & engineering. A, Structural materials : properties, microstructure and processing.

[56]  J. Kawałko,et al.  Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material , 2019, Materials & Design.

[57]  Zhang-Zhi Shi,et al.  Significant refinement of coarse (Fe, Mn)Zn13 phase in biodegradable Zn–1Mn-0.1Fe alloy with minor addition of rare earth elements , 2019 .

[58]  E. Edelman,et al.  In vivo and in vitro evaluation of a biodegradable magnesium vascular stent designed by shape optimization strategy. , 2019, Biomaterials.

[59]  Li Zhen,et al.  High-performance hot-warm rolled Zn-0.8Li alloy with nano-sized metastable precipitates and sub-micron grains for biodegradable stents , 2019, Journal of Materials Science & Technology.

[60]  Yufeng Zheng,et al.  Challenges in the use of zinc and its alloys as biodegradable metals: perspective from biomechanical compatibility. , 2019, Acta biomaterialia.

[61]  Q. Sun,et al.  Morphology and Mechanical, Corrosive, and Antibacterial Behaviors of Indirectly Extruded Zn-0.05wt.%Mg-(0.5, 1 wt.%)Ag Alloys , 2019, Journal of Materials Engineering and Performance.

[62]  G. Yuan,et al.  Effects of extrusion temperature on microstructure, mechanical properties and in vitro degradation behavior of biodegradable Zn-3Cu-0.5Fe alloy. , 2019, Materials science & engineering. C, Materials for biological applications.

[63]  J. Kawałko,et al.  Determination of room-temperature superplastic asymmetry and anisotropy of Zn-0.8Ag alloy processed by ECAP , 2019, Materials Science and Engineering: A.

[64]  Ding Li,et al.  Investigation on the microstructure, mechanical properties, in vitro degradation behavior and biocompatibility of newly developed Zn-0.8%Li-(Mg, Ag) alloys for guided bone regeneration. , 2019, Materials science & engineering. C, Materials for biological applications.

[65]  J. Drelich,et al.  Precipitation induced room temperature superplasticity in Zn-Cu alloys. , 2019, Materials letters.

[66]  Ping Li,et al.  Investigation of zinc‑copper alloys as potential materials for craniomaxillofacial osteosynthesis implants. , 2019, Materials science & engineering. C, Materials for biological applications.

[67]  M. Dargusch,et al.  The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: A comprehensive review. , 2019, Acta biomaterialia.

[68]  R. Bagheri,et al.  Ultra-fine-grained Zn-0.5Mn alloy processed by multi-pass hot extrusion: Grain refinement mechanism and room-temperature superplasticity , 2019, Materials Science and Engineering: A.

[69]  J. Kawałko,et al.  Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP , 2019, Materials Science and Engineering: A.

[70]  Diego Mantovani,et al.  Current status and outlook on the clinical translation of biodegradable metals , 2019, Materials Today.

[71]  Yufeng Zheng,et al.  Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design , 2019, Advanced Functional Materials.

[72]  Ding Li,et al.  Mechanical strengthening mechanism of Zn-Li alloy and its mini tube as potential absorbable stent material , 2019, Materials Letters.

[73]  Zhang-Zhi Shi,et al.  (Fe, Mn)Zn13 phase and its core-shell structure in novel biodegradable Zn-Mn-Fe alloys , 2019, Materials & Design.

[74]  D. Kent,et al.  Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys , 2018, Bioactive materials.

[75]  F. Witte,et al.  Biodegradable Metals , 2018, Biomaterials Science.

[76]  Dierk Raabe,et al.  Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes , 2018, Nature.

[77]  Ke Yang,et al.  Mechanical properties of magnesium alloys for medical application: A review. , 2018, Journal of the mechanical behavior of biomedical materials.

[78]  Yang Cao,et al.  Structural evolutions of metallic materials processed by severe plastic deformation , 2018, Materials Science and Engineering: R: Reports.

[79]  Yuping Ren,et al.  Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies , 2018, Journal of Materials Science & Technology.

[80]  J. Kawałko,et al.  Effect of zirconium microaddition on the microstructure and mechanical properties of Zn-Zr alloys , 2018, Materials Characterization.

[81]  Xiaolei Wu,et al.  Ductility and Plasticity of Nanostructured Metals: Differences and Issues , 2018, Heterostructured Materials.

[82]  J. Kawałko,et al.  Achieving room temperature superplasticity in the Zn-0.5Cu alloy processed via equal channel angular pressing , 2018 .

[83]  Zhang-Zhi Shi,et al.  Microalloyed Zn-Mn alloys: From extremely brittle to extraordinarily ductile at room temperature , 2018 .

[84]  J. Drelich,et al.  Zinc-based alloys for degradable vascular stent applications. , 2018, Acta biomaterialia.

[85]  Song Li,et al.  Effect of cumulative strain on the microstructural and mechanical properties of Zn-0.02 wt%Mg alloy wires during room-temperature drawing process , 2018 .

[86]  J. Drelich,et al.  Novel high-strength, low-alloys Zn-Mg (<0.1wt% Mg) and their arterial biodegradation. , 2018, Materials science & engineering. C, Materials for biological applications.

[87]  Zhang-Zhi Shi,et al.  Twinning in MnZn13 intermetallic compound with base-centered monoclinic structure in Zn-0.75Mn alloy , 2018 .

[88]  R. Logé,et al.  The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials , 2018 .

[89]  Ł. Rogal,et al.  A new approach to plastic deformation of biodegradable zinc alloy with magnesium and its effect on microstructure and mechanical properties , 2018 .

[90]  G. Yuan,et al.  Microstructure, mechanical properties and in vitro degradation behavior of novel Zn-Cu-Fe alloys , 2017 .

[91]  Zhang-Zhi Shi,et al.  Fabrication and characterization of novel biodegradable Zn-Mn-Cu alloys , 2017, Journal of Materials Science & Technology.

[92]  M. Herbig,et al.  Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel , 2017 .

[93]  Deyuan Zhang,et al.  Evolution of the degradation mechanism of pure zinc stent in the one-year study of rabbit abdominal aorta model. , 2017, Biomaterials.

[94]  Song Li,et al.  Microstructure, Mechanical Properties and Fracture Behavior of As-Extruded Zn–Mg Binary Alloys , 2017, Acta Metallurgica Sinica (English Letters).

[95]  Jeremy Goldman,et al.  The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper , 2017 .

[96]  G. Yuan,et al.  Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications. , 2017, Journal of the mechanical behavior of biomedical materials.

[97]  M. Vedani,et al.  Fabrication, mechanical properties and in vitro degradation behavior of newly developed ZnAg alloys for degradable implant applications. , 2017, Materials science & engineering. C, Materials for biological applications.

[98]  Yuping Ren,et al.  Abnormal effect of Mn addition on the mechanical properties of as-extruded Zn alloys , 2017 .

[99]  H. Maier,et al.  Zn-Li alloy after extrusion and drawing: Structural, mechanical characterization, and biodegradation in abdominal aorta of rat. , 2017, Materials science & engineering. C, Materials for biological applications.

[100]  M. Wróbel,et al.  Zinc subjected to plastic deformation by complex loading and conventional extrusion: Comparison of the microstructure and mechanical properties , 2017 .

[101]  Lei Zhang,et al.  Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants , 2017 .

[102]  P. Čížek,et al.  A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure , 2017 .

[103]  J. Kubásek,et al.  Microstructure and mechanical properties of the micrograined hypoeutectic Zn–Mg alloy , 2016, International Journal of Minerals, Metallurgy, and Materials.

[104]  Yufeng Zheng,et al.  Mechanical properties, in vitro degradation behavior, hemocompatibility and cytotoxicity evaluation of Zn–1.2Mg alloy for biodegradable implants , 2016 .

[105]  D Mantovani,et al.  Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation. , 2016, Journal of the mechanical behavior of biomedical materials.

[106]  Patrick K. Bowen,et al.  Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn‐Alloys , 2016, Advanced healthcare materials.

[107]  T. Al-Samman,et al.  Twin recrystallization mechanisms in magnesium-rare earth alloys , 2015 .

[108]  L. Stanciu,et al.  Magnesium, Iron and Zinc Alloys, the Trifecta of Bioresorbable Orthopaedic and Vascular Implantation - A Review , 2015 .

[109]  Andrew M. Minor,et al.  Origin of dramatic oxygen solute strengthening effect in titanium , 2015, Science.

[110]  J. Drelich,et al.  Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents , 2013, Advanced materials.

[111]  T. Langdon,et al.  On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion , 2013 .

[112]  Y. Bréchet,et al.  The effect of solute on discontinuous dynamic recrystallization , 2012 .

[113]  J. Robson,et al.  Particle effects on recrystallization in magnesium―manganese alloys: Particle―stimulated nucleation , 2009 .

[114]  F. Montheillet,et al.  Effect of initial grain size on dynamic recrystallization in high purity austenitic stainless steels , 2005 .

[115]  Lei Lu,et al.  Ultrahigh Strength and High Electrical Conductivity in Copper , 2004, Science.

[116]  F. Montheillet,et al.  A model of continuous dynamic recrystallization , 2003 .

[117]  R. Scattergood,et al.  Studies of deformation mechanisms in ultra-fine-grained and nanostructured Zn , 2002 .

[118]  B. Wielke,et al.  “Anomaly” of work-hardening coefficient in zinc single crystals , 1985 .

[119]  F. F. Lavrentev,et al.  Jump-Like Deformation and Stability of the Hardened and Structural States of Zinc Single Crystals with Forest Dislocations in the Temperature Range 293 to 4.2 K , 1984, November 16.

[120]  H. Kirchner,et al.  Anneal hardening of Zn and Zn-alloys , 1982 .

[121]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .

[122]  F. F. Lavrentev.  The type of dislocation interaction as the factor determining work hardening , 1980 .

[123]  F. F. Lavrentev,et al.  Jump‐Like Plastic Deformation and Dislocation Structure Instability in Zinc Crystals with Forest Dislocations , 1979 .

[124]  E. W. Hart.  Theory of the tensile test , 1967 .

[125]  A. K. Head,et al.  Dislocation Multipoles and Their Role in Strain-Hardening , 1964 .

[126]  J. Gilman.  Debris Mechanism of Strain-Hardening , 1962 .

[127]  M. Vedani,et al.  Zinc-Based Degradable Implants , 2019, Encyclopedia of Biomedical Engineering.

[128]  Li Li,et al.  Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn-Mg-Sr alloys as biodegradable metals , 2016 .

[129]  S. Antolovich,et al.  Plastic strain localization in metals: origins and consequences , 2014 .

[130]  S. Suwas,et al.  Softening and dynamic recrystallization in magnesium single crystals during c-axis compression , 2012 .

[131]  U. F. Kocks.  Thermodynamics and kinetics of slip , 1975 .

[132]  M. Considére.  Mémoire sur l'emploi du fer et de l'acier dans les constructions , 1885 .