Arrayed SU-8 polymer thermal actuators with inherent real-time feedback for actively modifying MEMS’ substrate warpage

This paper describes the design, fabrication and characterization of a batch-fabricated micro-thermal actuators array with inherent real-time self-feedback, which can be used to actively modify micro-electro-mechanical systems’ (MEMS’) substrate warpage. Arrayed polymer thermal actuators utilize SU-8 polymer (a thick negative photoresist) as a functional material with integrated Ti/Al film-heaters as a microscale heat source. The electro-thermo-mechanical response of a micro-fabricated actuator was measured. The resistance of the Al/Ti film resistor varies obviously with ambient temperature, which can be used as inherent feedback for observing real-time displacement of activated SU-8 bumps (0.43 μm Ω−1). Due to the high thermal expansion coefficient, SU-8 bumps tend to have relatively large deflection at low driving voltage and are very easily integrated with MEMS devices. Experimental results indicated that the proposed SU-8 polymer thermal actuators (array) are able to achieve accurate rectification of MEMS’ substrate warpage, which might find potential applications for solving stress-induced problems in MEMS.

[1]  Xinghua Wang,et al.  A novel sandwich differential capacitive accelerometer with symmetrical double-sided serpentine beam-mass structure , 2016 .

[2]  Tayfun Akin,et al.  Wafer level hermetic sealing of MEMS devices with vertical feedthroughs using anodic bonding , 2015 .

[3]  Xuezhong Wu,et al.  Out-of-plane micro-force function generator with inherent self-feedback for micro-deformation modifying , 2015, 2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS).

[4]  Xuezhong Wu,et al.  Transition interface for improving the temperature characteristics of micromachined gyroscopes , 2014 .

[5]  Wei Li,et al.  A novel self-aligned electrostatic vertical actuator using plastic deformation technology , 2014 .

[6]  Xuezhong Wu,et al.  Out-of-plane micro-force function generator based on polymeric thermal actuators for modifying micro-deformation , 2013 .

[7]  Yuelin Wang,et al.  A novel self-aligned electrostatic vertical actuator using plastic deformation technology , 2013, Microsystem Technologies.

[8]  Derek K. Shaeffer,et al.  MEMS inertial sensors: A tutorial overview , 2013, IEEE Communications Magazine.

[9]  Dimitrios Peroulis,et al.  Estimating residual stress, curvature and boundary compliance of doubly clamped MEMS from their vibration response , 2013 .

[10]  D. Dickensheets,et al.  SU-8 2002 Surface Micromachined Deformable Membrane Mirrors , 2013, Journal of Microelectromechanical Systems.

[11]  R. Puers,et al.  Characterization of the adhesion of SU-8 and Epoclad , 2012 .

[12]  M. Palaniapan,et al.  Phonon detection technique for the study of the temperature coefficient of resonance frequency in clamped–clamped beam resonators , 2009 .

[13]  Dong-Weon Lee,et al.  Fabrication of a micro XY-stage using SU-8 thermal actuators , 2009 .

[14]  Jiaru Chu,et al.  Integration of displacement sensor into bulk PZT thick film actuator for MEMS deformable mirror , 2008 .

[15]  Jiaru Chu,et al.  Design, fabrication and characterization of a bulk-PZT-actuated MEMS deformable mirror , 2007 .

[16]  C. Greiner,et al.  SU-8: a photoresist for high-aspect-ratio and 3D submicron lithography , 2007 .

[17]  Simon S. Ang,et al.  Fabrication, modeling and testing of a thin film Au/Ti microheater , 2007 .

[18]  S. Choa,et al.  Deformation Behavior of MEMS Gyroscope Sensor Package Subjected to Temperature Change , 2007, IEEE Transactions on Components and Packaging Technologies.

[19]  Kazuhiro Hane,et al.  Out-of-plane motion of 260-nm thick guided-mode resonant grating filter controlled by four micro-thermal actuators , 2007 .

[20]  Xin Zhang,et al.  Gradient residual stress induced elastic deformation of multilayer MEMS structures , 2007 .

[21]  M. Mehregany,et al.  Characterization of frequency tuning using focused ion beam platinum deposition , 2007 .

[22]  S. Walwadkar,et al.  Evaluation of Die Stress in MEMS Packaging: Experimental and Theoretical Approaches , 2006, IEEE Transactions on Components and Packaging Technologies.

[23]  A. Kourepenis,et al.  Error sources in in-plane silicon tuning-fork MEMS gyroscopes , 2006, Journal of Microelectromechanical Systems.

[24]  James Hone,et al.  Electrothermal tuning of Al–SiC nanomechanical resonators , 2006 .

[25]  Alun Harris,et al.  Frequency adjustment of microelectromechanical cantilevers using electrostatic pull down , 2005 .

[26]  N. Nguyen,et al.  A polymeric microgripper with integrated thermal actuators , 2004 .

[27]  E. Beyne,et al.  Introducing a silicone under the bump configuration for stress relief in a wafer level package , 2003, Proceedings of the 5th Electronics Packaging Technology Conference (EPTC 2003).

[28]  J. A. Chiou.  Simulations for thermal warpage and pressure nonlinearity of monolithic CMOS pressure sensors , 2003 .

[29]  M. Despont,et al.  SU-8: a low-cost negative resist for MEMS , 1997 .

[30]  Barry J. Gallacher,et al.  Control Scheme to Reduce the Effect of Structural Imperfections in a Rate Integrating MEMS Gyroscope , 2015, IEEE Sensors Journal.

[31]  Guo Zhanshe,et al.  Theoretical and experimental study of capacitance considering fabrication process and edge effect for MEMS comb actuator , 2011 .

[32]  G. Yadigaroglu,et al.  An investigation of microscale explosive vaporization of water on an ultrathin Pt wire , 2002 .

[33]  Kunito Okuyama,et al.  Boiling Nucleation on Very Small Film Heater Subjected to Extremely Rapid Heating. , 1994 .