Microstructure and mechanical properties of as-cast and extruded biomedical Mg-Zn-Y-Zr-Ca alloy at different temperatures

[1]  Zhang Hongjuan,et al.  Influence of Hot Extrusion Process on Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Magnesium Alloy , 2018, Rare Metal Materials and Engineering.

[2]  W. Ke,et al.  Biomedical Magnesium Alloys: Composition, Microstructure and Corrosion , 2018 .

[3]  G. Ebrahimi,et al.  Deformation behavior and processing maps of Mg-Zn-Y alloy containing I phase at elevated temperatures , 2018 .

[4]  Guoqun Zhao,et al.  Microstructure and mechanical properties of Mg-3.0Zn-1.0Sn-0.3Mn-0.3Ca alloy extruded at different temperatures , 2018 .

[5]  L. X. Zhang,et al.  Fine-grained structure and recrystallization at ambient temperature for pure magnesium subjected to large cold plastic deformation , 2017 .

[6]  F. Mert.  Wear behaviour of hot rolled AZ31B magnesium alloy as candidate for biodegradable implant material , 2017 .

[7]  G. Garcés,et al.  Effects of calcium, manganese and cerium-rich mischmetal additions on the mechanical properties of extruded Mg-Zn-Y alloy reinforced by quasicrystalline I-phase , 2017 .

[8]  G. Yuan,et al.  Effects of solution treatment before extrusion on the microstructure, mechanical properties and corrosion of Mg-Zn-Gd alloy in vitro , 2017 .

[9]  Yufeng Zheng,et al.  Degradation, hemolysis, and cytotoxicity of silane coatings on biodegradable magnesium alloy , 2017 .

[10]  H. Nie,et al.  Effect of SiC nanoparticles addition on the microstructures and mechanical properties of ECAPed Mg9Al–1Si alloy , 2017 .

[11]  Chao Xu,et al.  Effect of extrusion parameters on microstructure and mechanical properties of Mg-7.5Gd-2.5Y-3.5Zn-0.9Ca-0.4Zr (wt%) alloy , 2017 .

[12]  K. Nie,et al.  Effect of ultra-slow extrusion speed on the microstructure and mechanical properties of Mg-4Zn-0.5Ca alloy , 2016 .

[13]  Min Song,et al.  Dynamic precipitation, microstructure and mechanical properties of Mg-5Zn-1Mn alloy sheets prepared by high strain-rate rolling , 2016 .

[14]  S. Agnew,et al.  Effect of precipitate shape and orientation on Orowan strengthening of non-basal slip modes in hexagonal crystals, application to magnesium alloys , 2016 .

[15]  W. Fang,et al.  Evolution of microstructure and mechanical properties of Mg–3.0Zn–0.2Ca–0.5Y alloy by extrusion at various temperatures , 2016 .

[16]  K. Nie,et al.  Competition behavior of the strengthening effects in as-extruded AZ91 matrix: Influence of pre-existed Mg17Al12 phase , 2016 .

[17]  W. Ding,et al.  Dislocations in icosahedral quasicrystalline phase embedded in hot-deformed Mg alloys , 2016 .

[18]  Junlong Zhang,et al.  Microstructure, texture and mechanical properties of Mg-3.0Zn-0.2Ca alloys fabricated by extrusion at various temperatures , 2015 .

[19]  F. Pan,et al.  Effect of extrusion temperature on the microstructure and thermal conductivity of Mg–2.0Zn–1.0Mn–0.2Ce alloys , 2015 .

[20]  M. Zheng,et al.  Development of high-strength, low-cost wrought Mg–2.5 mass% Zn alloy through micro-alloying with Ca and La , 2015 .

[21]  M. Parsa,et al.  Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: Dislocation glide and climb, dynamic recrystallization, and mechanical twinning , 2015 .

[22]  H. Mirzadeh.  Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation , 2014 .

[23]  J. Meng,et al.  Dynamic recrystallization and texture evolution of Mg–Y–Zn alloy during hot extrusion process , 2014 .

[24]  A. Sachdev,et al.  Effects of extrusion parameters on the microstructure and mechanical properties of Mg–Zn–(Mn)–Ce/Gd alloys , 2014 .

[25]  T. Sasaki,et al.  Effect of extrusion conditions on microstructure and mechanical properties of microalloyed Mg–Sn–Al–Zn alloys , 2013 .

[26]  W. Ke,et al.  Effect of Zr modification on solidification behavior and mechanical properties of Mg–Y–RE (WE54) alloy , 2013 .

[27]  S. Park,et al.  Effects of extrusion speed on the microstructure and mechanical properties of ZK60 alloys with and without 1 wt% cerium addition , 2013 .

[28]  K. Mensah-Darkwa,et al.  Mechanical and Corrosion Properties of Magnesium–Hydroxyapatite (Mg–HA) Composite Thin Films , 2013 .

[29]  Baoping Zhang,et al.  Preparation and characterization of a new biomedical Mg–Zn–Ca alloy , 2012 .

[30]  M. Zheng,et al.  Dynamic microstructural changes during hot extrusion and mechanical properties of a Mg–5.0 Zn–0.9 Y–0.16 Zr (wt.%) alloy , 2011 .

[31]  L. Geng,et al.  Enhanced mechanical properties in fine-grained Mg–1.0Zn–0.5Ca alloys prepared by extrusion at different temperatures , 2010 .

[32]  S. Park,et al.  Effect of the extrusion conditions on the texture and mechanical properties of indirect-extruded Mg–3Al–1Zn alloy , 2009 .

[33]  L. Wagner,et al.  Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical properties of the magnesium alloy AZ80 , 2009 .

[34]  Frank Witte,et al.  Degradable biomaterials based on magnesium corrosion , 2008 .

[35]  W. Ding,et al.  Deformation behavior of Mg–Zn–Gd-based alloys reinforced with quasicrystal and Laves phases at elevated temperatures , 2007 .

[36]  Daokui Xu,et al.  Effect of microstructure and texture on the mechanical properties of the as-extruded Mg–Zn–Y–Zr alloys , 2007 .

[37]  H. Haferkamp,et al.  In vivo corrosion of four magnesium alloys and the associated bone response. , 2005, Biomaterials.

[38]  Yanping Zhu,et al.  Precipitation behavior and mechanical properties of a Mg–Zn–Y–Zr alloy processed by thermo-mechanical treatment , 2005 .

[39]  K. Maruyama,et al.  The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys , 2003 .

[40]  D. Bae,et al.  Application of quasicrystalline particles as a strengthening phase in Mg–Zn–Y alloys , 2002 .