Pinch analysis for recycling thermal energy in the Cu–Cl cycle

Abstract Due to lower temperature requirements than other thermochemical cycles, the copper-chlorine (Cu–Cl) cycle is one of the most promising cycles for hydrogen production. The cycle consists of a number of endothermic and exothermic processes. The overall efficiency of the cycle can be improved by recovering as much heat as possible from the exothermic processes within the cycle and minimizing the net heat input to the cycle. In this paper, a pinch methodology is used to determine the minimum energy requirement for the overall Cu–Cl cycle, if heat recovery within the cycle is optimized. All heating and cooling flows (actual or potential) are presented as temperature-energy flow profiles and combined into composite curves for the entire cycle. Additional equipment and the overall thermal layout of the cycle are also investigated.

[1]  Greg F. Naterer,et al.  Thermal design of a solar hydrogen plant with a copperchlorine cycle and molten salt energy storage , 2011 .

[2]  G. Flamant,et al.  Novel two-step SnO2/SnO water-splitting cycle for solar thermochemical production of hydrogen , 2008 .

[3]  Ali T-Raissi,et al.  Analysis of sulfur–iodine thermochemical cycle for solar hydrogen production. Part I: decomposition of sulfuric acid , 2005 .

[4]  G. Naterer,et al.  Comparison of molten salt heat recovery options in the Cu–Cl cycle of hydrogen production , 2011 .

[5]  A. Steinfeld.  Solar hydrogen production via a two-step water-splitting thermochemical cycle based on Zn/ZnO redox reactions , 2002 .

[6]  Bodo Linnhoff,et al.  A User guide on process integration for the efficient use of energy , 1994 .

[7]  G. Naterer,et al.  Comparison of sulfur–iodine and copper–chlorine thermochemical hydrogen production cycles , 2010 .

[8]  C. K. Chow,et al.  CONCEPTUAL FUEL CHANNEL DESIGNS FOR CANDU-SCWR , 2008 .

[9]  R. L. Sawhney,et al.  Comparison of environmental and economic aspects of various hydrogen production methods , 2008 .

[10]  Ibrahim Dincer,et al.  Heat recovery from molten CuCl in the Cu–Cl cycle of hydrogen production , 2010 .

[11]  Greg F. Naterer,et al.  Thermochemical hydrogen production with a copper-chlorine cycle. I: oxygen release from copper oxychloride decomposition , 2008 .

[12]  Ibrahim Dincer,et al.  Canada’s program on nuclear hydrogen production and the thermochemical Cu–Cl cycle , 2010 .

[13]  Marc A. Rosen,et al.  Advances in hydrogen production by thermochemical water decomposition: A review , 2010 .

[14]  J. Funk.  Thermochemical hydrogen production: past and present , 2001 .

[15]  Kaoru Onuki,et al.  Thermochemical Water Splitting for Hydrogen Production Utilizing Nuclear Heat from an HTGR , 2005 .

[16]  Ian C. Kemp,et al.  Pinch Analysis and Process Integration: A User Guide on Process Integration for the Efficient Use of Energy , 2007 .

[17]  Aldo Steinfeld,et al.  Solar hydrogen production via a two-step thermochemical process based on MgO/Mg redox reactions : Thermodynamic and kinetic analyses , 2008 .

[18]  Michele A. Lewis,et al.  The evaluation of alternative thermochemical cycles – Part II: The down-selection process , 2009 .