Impact force identification in aerospace panels by an inverse ultrasonic guided wave problem

This paper deals with monitoring impacts on aluminum and composite aerospace panels. The specific problems addressed are (1) the identification of the impact forces (force magnitude time history) and (2) the discrimination of "damaging impacts" from "non-damaging impacts." Ultrasonic guided waves generated by the impacts are used as the sensing mechanism. Flexible Macro-Fiber Composite (MFC) patches are used as the ultrasonic receivers. The impact force identification method is based on an optimization routine which minimizes the difference between the experimental impact waves and the numerical impact waves calculated by a Semi-Analytical Finite Element (SAFE) forced analysis. The differentiation of "damaging impacts" vs. "non-damaging impacts" is based on a frequency analysis of the impact waves. These techniques are demonstrated through an extensive experimental testing program involving the following six specimens: an aluminum panel, a quasi-isotropic CFRP composite panel, a highly anisotropic CFRP composite panel, a stiffened aluminum panel, a stiffened quasi-isotropic CFRP composite panel, and a stiffened anisotropic CFRP composite panel. These panels were subjected to low-velocity hammer impacts and to high-velocity gas-gun impacts by ice projectiles at speeds up to 170 m/sec using UCSD's gas-gun test facility. In all of these experiments, the techniques summarized above gave excellent results for both impact force identification and impact force discrimination.

[1]  Fu-Kuo Chang,et al.  Impact identification of stiffened composite panels: I. System development , 2001 .

[2]  Keith T. Kedward,et al.  Experimental investigation of high velocity ice impacts on woven carbon/epoxy composite panels , 2003 .

[3]  Fu-Kuo Chang,et al.  Identifying Impacts in Composite Plates with Piezoelectric Strain Sensors, Part II: Experiment , 1998 .

[4]  James F. Doyle.  Experimentally determining the contact force during the transverse impact of an orthotropic plate , 1987 .

[5]  Jonghyun Park,et al.  System identification method for monitoring impact events , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[6]  Sauvik Banerjee,et al.  Acoustic emission waveforms in composite laminates under low velocity impact , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  G. I. Rastorguev,et al.  Identification of pulse shapes during transverse impact on composite beams and plates , 2009 .

[8]  In-Gul Kim,et al.  Prediction of Impact Forces on an Aircraft Composite Wing , 2008 .

[9]  P. Wilcox,et al.  The excitation and detection of Lamb waves with planar coil electromagnetic acoustic transducers , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  Keeyoung Choi,et al.  Identification of Impact Force and Location Using Distributed Sensors , 1996 .

[11]  Li Zhou,et al.  Impact load identification of composite structure using genetic algorithms , 2009 .

[12]  Hisao Fukunaga,et al.  An efficient approach for identifying impact force using embedded piezoelectric sensors and Chebyshev polynomial , 2005, ICMIT: Mechatronics and Information Technology.

[13]  T. Kundu,et al.  Locating point of impact in anisotropic fiber reinforced composite plates. , 2008, Ultrasonics.

[14]  Li Ma,et al.  Low-Velocity Impact Characteristics of Carbon Fiber Composites Lattice Core Sandwich Structures , 2009 .

[15]  Fuh-Gwo Yuan,et al.  Impact source identification in finite isotropic plates using a time-reversal method: theoretical study , 2010 .

[16]  Stephen M. Schultz,et al.  Peak wavelength interrogation of fiber Bragg grating sensors during impact events , 2010 .

[17]  Stephen M. Schultz,et al.  Impact induced damage assessment in composite laminates through embedded fiber Bragg gratings , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[18]  Ahmet S. Yigit,et al.  Characterization of impact in composite plates , 1998 .

[19]  Kara Peters,et al.  Damage Monitoring in Woven Composites Using Fiber-Bragg Grating Sensors on Multiple Time Scales , 2008 .

[20]  Michael R Wisnom,et al.  Progress Towards a Forward Model of the Complete Acoustic Emission Process , 2006 .

[21]  Abdallah A. Elsharkawy,et al.  An inverse solution for low-velocity impact in composite plates , 2001 .

[22]  Young Nam Kim,et al.  Characterization of Impact Damages and Responses in CFRP Composite Shells , 2004 .

[23]  A. Tobias,et al.  Acoustic-emission source location in two dimensions by an array of three sensors , 1976 .

[24]  C. T. Sun,et al.  Determining transverse impact force on a composite laminate by signal deconvolution , 1989 .

[25]  Satoshi Atobe,et al.  Identification of locations and force histories of multiple point impacts on composite isogrid-stiffened panels , 2009 .

[26]  H. Inoue,et al.  Review of inverse analysis for indirect measurement of impact force , 2001 .

[27]  Sauvik Banerjee,et al.  Identification of impact force on a thick plate based on the elastodynamic and higher-order time-frequency analysis , 2007 .

[28]  W. Staszewski,et al.  Impact damage location in composite structures using optimized sensor triangulation procedure , 2003 .

[29]  Hisao Fukunaga,et al.  An efficient approach for identifying impact force using embedded piezoelectric sensors , 2007 .

[30]  Hyoungseock Seo,et al.  Numerical Simulation of Glass-Fiber-Reinforced Aluminum Laminates with Diverse Impact Damage , 2010 .

[31]  F. L. D. Scalea,et al.  Macro-fiber composite piezoelectric rosettes for acoustic source location in complex structures , 2007 .

[32]  Fabrizio Ricci,et al.  Automated structural health monitoring system using acoustic emission and modal data , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[33]  Keeyoung Choi,et al.  Identification of Foreign Object Impact in Structures Using Distributed Sensors , 1994 .

[34]  Wesley J. Cantwell,et al.  Geometrical effects in the low velocity impact response of GFRP , 2007 .

[35]  Aditi Chattopadhyay,et al.  Impact Localization and Force Estimation on a Composite Wing using Fiber Bragg Gratings Sensors , 2010 .

[36]  Wesley J. Cantwell,et al.  Impact Response Characterization in Composite Plates—Experimental Validation , 2010 .

[37]  J. Rose,et al.  Guided wave dispersion curves for a bar with an arbitrary cross-section, a rod and rail example. , 2003, Ultrasonics.

[38]  Jeffrey C. Lagarias,et al.  Convergence Properties of the Nelder-Mead Simplex Method in Low Dimensions , 1998, SIAM J. Optim..