论文信息 - A 0.236 mm $^{2}$, 3.99 mW Fully Integrated 90 nm CMOS L1/L5 GPS Frequency Synthesizer Using a Regulated Ring VCO

A 0.236 mm $^{2}$, 3.99 mW Fully Integrated 90 nm CMOS L1/L5 GPS Frequency Synthesizer Using a Regulated Ring VCO

A broad-band frequency synthesizer for L1/L5 dual-band GPS RF receiver is designed using a four-stage differential ring voltage controlled oscillator (VCO) with an on-chip regulator to compensate for variation by supply and temperature. Also, a pole-zero scalable loop filter is proposed to tune the loop bandwidth while keeping damping factor against wide variations of VCO gain. The proposed frequency synthesizer fabricated on a 90 nm CMOS process occupies 0.236 mm2 and consumes 3.99 mW at 1.2 V. The measured phase noise is less than -85 dBc/Hz for all bands.

In-Chul Hwang

[1] Jun-Gi Jo,et al. An $L1$ -Band Dual-Mode RF Receiver for GPS and Galileo in 0.18- $\mu {\hbox{m}}$ CMOS , 2009 .

[2] Jun-Gi Jo,et al. A L1-band dual-mode RF receiver for GPS and Galileo in 0.18μm CMOS , 2008, 2008 IEEE Radio Frequency Integrated Circuits Symposium.

[3] Donghyun Baek,et al. A 0.93-mA Spur-Enhanced Frequency Synthesizer for L1/L5 Dual-Band GPS/Galileo RF Receiver , 2010, IEEE Microwave and Wireless Components Letters.

[4] Andrea Baschirotto,et al. A 35–mW–3.6mm 2 fully integrated 0.18µm CMOS GPS radio , 2002 .