Life cycle assessment of wheat gluten powder and derived packaging film

This article presents a life cycle assessment (LCA) on wheat gluten materials. Two objectives form the motivation for this paper. First, the study provides an assessment of the environmental impact of wheat gluten powder production. The aim of this contribution is to provide a base assessment which can feed into the evaluation of any future wheat-gluten-based product. Second, the study evaluates wheat-gluten-based packaging film and compares it with low density polyethylene (LDPE) and polylactide (PLA) packaging film over the life cycle of these products. Scenarios including extrusion and casting for film production, incineration with energy recovery, and composting for end-of-life treatments are evaluated. Such comparison offers insight in environmental benefits of wheat gluten over conventional plastic film as well as its bio-based alternative and identifies its optimal production and disposal methods. For wheat gluten production, the LCA results show that the impacts of the wheat cultivation and gluten drying phase are dominant in the majority of the 18 impact categories in the ReCiPe midpoint assessment method. The LCA results also exhibit that the scenario with wheat gluten film produced by extrusion and incinerated to recover embodied energy is favorable from environmental perspective. It offers great benefits in climate change and fossil depletion over LDPE film and in 14 impact categories over PLA film. Although wheat gluten film suffers from common problems for bio-based materials (e.g. land occupation), the overall environmental performance indicates that wheat gluten provides a promising source for bio-based polymer production. © 2013 Society of Chemical Industry and John Wiley & Sons, Ltd.

[1]  Curtis L. Weller,et al.  MECHANICAL AND BARRIER PROPERTIES OF EDIBLE CORN AND WHEAT PROTEIN FILMS , 1991 .

[2]  P. Chalier,et al.  Food Packaging Applications of Biopolymer‐Based Films , 2011 .

[3]  S. Guilbert,et al.  Properties of chemically and physically treated wheat gluten films. , 2000, Journal of agricultural and food chemistry.

[4]  Susan Selke,et al.  Mechanical, Physical, and Barrier Properties of Poly(Lactide) Films , 2003 .

[5]  Nathalie Gontard,et al.  Influence of Relative Humidity and Film Composition on Oxygen and Carbon Dioxide Permeabilities of Edible Films , 1996 .

[6]  Ernst Worrell,et al.  Energy efficiency improvement and cost saving opportunities for the Corn Wet Milling Industry: An ENERGY STAR Guide for Energy and Plant Managers , 2003 .

[7]  Steve Davies,et al.  ORIGINAL RESEARCH: The eco-profile for current Ingeo® polylactide production , 2010 .

[8]  Mikael Gällstedt,et al.  Structure and morphology of wheat gluten films: from polymeric protein aggregates toward superstructure arrangements. , 2011, Biomacromolecules.

[9]  Jan A. Delcour,et al.  Fractionation of wheat and wheat flour into starch and gluten: overview of the main processes and the factors involved , 2005 .

[10]  N. Reddy,et al.  Novel protein fibers from wheat gluten. , 2007, Biomacromolecules.

[11]  J. Krochta,et al.  Thermoplastic processing of proteins for film formation--a review. , 2008, Journal of food science.

[12]  L. Hyvönen,et al.  Preparation, properties and applications of wheat gluten edible films , 2000 .

[13]  Marcello Braglia,et al.  LIFE CYCLE ASSESSMENT OF PASTA PRODUCTION IN ITALY , 2007 .

[14]  Theeranun Janjarasskul,et al.  Edible packaging materials. , 2010, Annual review of food science and technology.

[15]  Aristippos Gennadios,et al.  Effect of pH on properties of wheat gluten and soy protein isolate films , 1993 .

[16]  T. H. Christensen,et al.  Composting and compost utilization: accounting of greenhouse gases and global warming contributions , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[17]  V. Siracusa.  Food Packaging Permeability Behaviour: A Report , 2012 .

[18]  C. G. J. Baker,et al.  Energy Consumption of Industrial Spray Dryers , 2005 .

[19]  Nathalie Gontard,et al.  Edible Wheat Gluten Films: Influence of the Main Process Variables on Film Properties using Response Surface Methodology , 1992 .

[20]  Stuart A. Scott,et al.  Improving the sustainability of the production of biodiesel from oilseed rape in the UK , 2008 .

[21]  Stuart Bateman,et al.  Biodegradation of chemically modified wheat gluten-based natural polymer materials , 2010 .

[22]  Anthony G Williams,et al.  Environmental burdens of producing bread wheat, oilseed rape and potatoes in England and Wales using simulation and system modelling , 2010 .

[23]  Carlos Raimundo Ferreira Grosso,et al.  Effect of edible wheat gluten-based films and coatings on refrigerated strawberry (Fragaria ananassa) quality , 2005 .

[24]  Ernst Worrell,et al.  Present and future development in plastics from biomass , 2010 .

[25]  Nickolas J Themelis,et al.  LCA comparison of windrow composting of yard wastes with use as alternative daily cover (ADC). , 2010, Waste management.

[26]  Y. Chisti,et al.  Recovery of microalgal biomass and metabolites: process options and economics. , 2003, Biotechnology advances.

[27]  Sung-Woo Cho,et al.  Properties of extruded vital wheat gluten sheets with sodium hydroxide and salicylic acid. , 2009, Biomacromolecules.

[28]  Christophe Baley,et al.  PLLA/Flax Mat/Balsa Bio-Sandwich—Environmental Impact and Simplified Life Cycle Analysis , 2012, Applied Composite Materials.

[29]  S. Guilbert,et al.  Rheological properties of gluten plasticized with glycerol: dependence on temperature, glycerol content and mixing conditions , 1999 .

[30]  Robert K. Ham,et al.  Life-cycle inventory of municipal solid waste and yard waste windrow composting in the United States. , 2004 .

[31]  A. Queiroz,et al.  The life cycle assessment of biodiesel from palm oil (“dendê”) in the Amazon , 2012 .

[32]  Yihu Song,et al.  Preparation and properties of wheat gluten/silica composites , 2009 .

[33]  Aristippos Gennadios,et al.  Modification of Physical and Barrier Properties of Edible Wheat Gluten-Based Films , 1993 .

[34]  N. Gontard,et al.  Oxygen and Carbon Dioxide Permeability of Wheat Gluten Film: Effect of Relative Humidity and Temperature , 1997 .

[35]  Andrew J. McAloon,et al.  Engineering process and cost model for a conventional corn wet milling facility , 2008 .

[36]  T. Holgate,et al.  Thermal conductivity and combustion properties of wheat gluten foams. , 2012, ACS applied materials & interfaces.

[37]  Hubert Chiron,et al.  Energetical and rheological approaches of wheat flour dough mixing with a spiral mixer , 2012 .

[38]  David A. Glassner,et al.  ORIGINAL RESEARCH: The eco-profiles for current and near-future NatureWorks® polylactide (PLA) production , 2007 .

[39]  Bilayer films composed of wheat gluten film and UV-cured coating: water vapor permeability and other functional properties , 2000 .

[40]  Fausto Freire,et al.  Life-cycle studies of biodiesel in Europe: A review addressing the variability of results and modeling issues , 2011 .

[41]  A. Sayaslan.  Wet-milling of wheat flour: industrial processes and small-scale test methods , 2004 .

[42]  N. Reddy,et al.  Thermoplastic films from wheat proteins , 2012 .

[43]  S. Guilbert,et al.  Extrusion of wheat gluten plasticized with glycerol: Influence of process conditions on flow behavior, rheological properties, and molecular size distribution , 1999 .

[44]  Shelie A. Miller,et al.  Environmental trade-offs of biobased production. , 2007, Environmental science & technology.

[45]  Thomas H Christensen,et al.  Assessing recycling versus incineration of key materials in municipal waste: The importance of efficient energy recovery and transport distances. , 2012, Waste management.

[46]  Stéphane Guilbert,et al.  Biodegradability of wheat gluten based bioplastics. , 2004, Chemosphere.