Electrochemical Discharge Micro-machining of Engineering Materials

Electrochemical discharge micro-machining (micro-ECDM) process appears to be very promising as a future micro-machining technique, since in many areas of applications it offers several advantages, which include machining of variety of electrically non-conducting hard, brittle materials including glass, ceramics and composites etc. It is an advanced hybrid micro-machining process that combines the techniques of electrochemical machining (ECM) and electrodischarge machining (EDM). This book chapter focuses on the current researches and developments in micro-ECDM process . The chapter discusses in details about the micro-ECDM system, which includes the mechanical hardware unit, electrolyte supply unit and electrical power supply unit etc. The effects of various factors on different machining performance characteristics such as material removal rate, accuracy, heat affected zone, gas film quality, machining depth, surface topography and tool wear etc. during its application mainly for micro-drilling and micro-cutting operations on engineering materials are represented in this chapter. The chapter also gives a glimpse on the fundamentals, problematic areas and applications of micro-ECDM process and highlights the challenges and future possibilities of research in this area. The recent advancements for improvement of performance of µ-ECDM process by using the rotating and travelling micro-tool, controlling the gap between the tool and the workpiece, changing the shape of micro-tool and also controlling the surface texture and material of tool for micro-spark discharge for required micro-machining operations are also depicted in this chapter. The chapter is expected to open up new insights into the process characteristics for successful application of electrochemical discharge micro-machining (micro-ECDM) process and provides valuable guidance to the applied researchers and manufacturing scientists for setting up unique platform for micro-machining electrically non-conducting engineering materials.

[1]  Pascal Maillard,et al.  Improving the material removal rate in spark-assisted chemical engraving (SACE) gravity-feed micro-hole drilling by tool vibration , 2006 .

[2]  Hannes Bleuler,et al.  Physical principles and miniaturization of spark assisted chemical engraving (SACE) , 2005 .

[3]  S. D. Collins,et al.  Removable tubing interconnects for glass-based micro-fluidic systems made using ECDM , 2004 .

[4]  Biing-Hwa Yan,et al.  Wire electrochemical discharge machining (WECDM) of quartz glass with titrated electrolyte flow , 2013 .

[5]  Rolf Wüthrich,et al.  Toward a better understanding of glass gravity-feed micro-hole drilling with electrochemical discharges , 2009 .

[6]  Alakesh Manna,et al.  A study on micro machining of e-glass–fibre–epoxy composite by ECSM process , 2012 .

[7]  B. Bhattacharyya,et al.  Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials , 1999 .

[8]  Biing-Hwa Yan,et al.  Enhancement of ECDM efficiency and accuracy by spherical tool electrode , 2011 .

[9]  W. Peng,et al.  Study of electrochemical discharge machining technology for slicing non-conductive brittle materials , 2004 .

[10]  Biing-Hwa Yan,et al.  Study of gas film quality in electrochemical discharge machining , 2010 .

[11]  Biing-Hwa Yan,et al.  Magnetic field-assisted electrochemical discharge machining , 2010 .

[12]  B. Yan,et al.  3D microstructuring of Pyrex glass using the electrochemical discharge machining process , 2007 .

[13]  R. Wüthrich,et al.  Micro-texturing channel surfaces on glass with spark assisted chemical engraving , 2012 .

[14]  L. A. Hof,et al.  The gas film in Spark Assisted Chemical Engraving (SACE) - A key element for micro-machining applications , 2006 .

[15]  B. Doloi,et al.  Experimental investigation into electrochemical discharge microdrilling on advanced ceramics , 2008, Int. J. Manuf. Technol. Manag..

[16]  Sang Jo Lee,et al.  Geometric improvement of electrochemical discharge micro-drilling using an ultrasonic-vibrated electrolyte , 2009 .

[17]  Vinod Yadava,et al.  Experimental Study of Traveling Wire Electrochemical Spark Machining of Borosilicate Glass , 2014 .

[18]  Ali Dolatabadi,et al.  Characterization and modeling of 2D-glass micro-machining by spark-assisted chemical engraving (SACE) with constant velocity , 2008 .

[19]  Akshay Dvivedi,et al.  Developments in electrochemical discharge machining: A review on electrochemical discharge machining, process variants and their hybrid methods , 2016 .

[20]  B. Bhattacharyya,et al.  Parametric analysis on electrochemical discharge machining of silicon nitride ceramics , 2006 .

[21]  Hannes Bleuler,et al.  Geometrical characterization of micro-holes drilled in glass by gravity-feed with spark assisted chemical engraving (SACE) , 2007 .

[22]  Cheng-Kuang Yang,et al.  Effect of surface roughness of tool electrode materials in ECDM performance , 2010 .

[23]  Biswanath Doloi,et al.  Investigation into the influences of the power circuit on the micro-electrochemical discharge machining process , 2009 .

[24]  G. K. Lal,et al.  An experimental study of discharge mechanism in electrochemical discharge machining , 2002 .

[25]  Amol D. Jadhav,et al.  ECDM methods for fluidic interfacing through thin glass substrates and the formation of spherical microcavities , 2007 .

[26]  Chong Nam Chu,et al.  Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining , 2009 .

[27]  Amitabha Ghosh,et al.  Mechanism of spark generation during electrochemical discharge machining: a theoretical model and experimental verification , 1996 .

[28]  Pulak M. Pandey,et al.  On the analysis of the electrochemical spark machining process , 1999 .

[29]  V. Fascio,et al.  Machining of non-conducting materials using electrochemical discharge phenomenon – An overview , 2005 .

[30]  Kamlakar P Rajurkar,et al.  Experimental Investigations into Traveling Wire Electrochemical Spark Machining (TW-ECSM) of Composites , 1991 .

[31]  Cheng-Kuang Yang,et al.  Improving machining performance of wire electrochemical discharge machining by adding SiC abrasive to electrolyte , 2006 .

[32]  Hannes Bleuler,et al.  Spark Assisted Chemical Engraving (SACE) in microfactory , 2005 .

[33]  Somashekhar S. Hiremath,et al.  Characterisation of Micro Channels in Electrochemical Discharge Machining Process , 2014 .

[34]  Seoung Hwan Lee,et al.  Voltage pulse frequency and duty ratio effects in an electrochemical discharge microdrilling process of Pyrex glass , 2006 .

[35]  Sang Jo Lee,et al.  Improvement of surface integrity of electro-chemical discharge machining process using powder-mixed electrolyte , 2007 .