Machine Vision in Measurement

The demand in manufacturing industries productivity with high product quality is important. Nowadays, NC, CNC, and automated machine shops are playing vital role for higher productivity. Similarly, the quality inspection of the product also needed higher productivity. For the reason, there are lots of inspection methods such as direct and indirect measurement techniques which are used in measurement of products. In that machine vision is one of the newer techniques, which is used to measure the products with the aid of CCD camera and image processing techniques such as image acquisition, denoising with filters, comparison of real image and actual image, mapping of image, and image processing algorithm. In this chapter, the two important measurement techniques were discussed: firstly tool wear measurement and secondly surface finish measurement. Finally, this chapter proposes the machine vision technique that is best suitable to measure the tool wear and surface finish in automated manufacturing industries.

[1]  Kwang Ho Kim,et al.  Tool wear measuring technique on the machine using CCD and exclusive jig , 2002 .

[2]  Y. S. Tarng,et al.  An automated flank wear measurement of microdrills using machine vision , 2006 .

[3]  H. V. Ravindra,et al.  Machine Vision for Tool Status Monitoring in Turning Inconel 718 using Blob Analysis , 2015 .

[4]  Jaime A. Camelio,et al.  Automated wear characterization for broaching tools based on machine vision systems , 2015 .

[5]  Kenneth A. Loparo,et al.  A decision fusion algorithm for tool wear condition monitoring in drilling , 2001 .

[6]  B. Dhanasekar,et al.  Restoration of blurred images for surface roughness evaluation using machine vision , 2010 .

[7]  Chen Zhang,et al.  On-line tool wear measurement for ball-end milling cutter based on machine vision , 2013, Comput. Ind..

[8]  H. H. Shahabi,et al.  In-cycle monitoring of tool nose wear and surface roughness of turned parts using machine vision , 2009 .

[9]  Mu-Chen Chen,et al.  Roundness measurements for discontinuous perimeters via machine visions , 2002, Comput. Ind..

[10]  Khalil Khalili,et al.  Improving the Accuracy of Crack Length Measurement Using Machine Vision , 2015 .

[11]  Mani Maran Ratnam,et al.  Measurement of nose radius wear in turning tools from a single 2D image using machine vision , 2009 .

[12]  Kazuo Yamazaki,et al.  A study on three-dimensional vision system for machining setup verification , 2010 .

[13]  Kunpeng Zhu,et al.  A machine vision system for micro-milling tool condition monitoring , 2017 .

[14]  Muhammad Azmi Ayub,et al.  In-line Inspection of Roundness Using Machine Vision , 2014 .

[15]  T. I. El-Wardany,et al.  Tool condition monitoring in drilling using vibration signature analysis , 1996 .

[16]  Bhumika Gupta,et al.  Image Denoising with Linear and Non-Linear Filters: A REVIEW , 2013 .

[17]  Colin Bradley,et al.  Surface Texture Indicators of Tool Wear - A Machine Vision Approach , 2001 .

[18]  Srinagalakshmi Nammi,et al.  Effect of surface lay in the surface roughness evaluation using machine vision , 2014 .

[19]  Wei Liu,et al.  A three-dimensional triangular vision-based contouring error detection system and method for machine tools , 2017 .

[20]  S. H. Cheraghi,et al.  The application of acoustic emission for precision drilling process monitoring , 1999 .

[21]  A. Asadpour,et al.  Design and application of industrial machine vision systems , 2007 .

[22]  Silvia Silva da Costa Botelho,et al.  Vision Based Measurement applied to Industrial Instrumentation , 2017 .

[23]  H. H. Shahabi,et al.  Prediction of surface roughness and dimensional deviation of workpiece in turning: a machine vision approach , 2010 .

[24]  Bartosz Powałka,et al.  Chatter detection algorithm based on machine vision , 2012 .

[25]  George Azzopardi,et al.  Machine-vision-based identification of broken inserts in edge profile milling heads , 2017 .

[26]  Kazuo Yamazaki,et al.  On-machine 3D vision system for machining setup modeling , 2010 .

[27]  Bernard C. Jiang,et al.  Study of a measurement algorithm and the measurement loss in machine vision metrology , 1999 .

[28]  Bartosz Powałka,et al.  Machine vision micro-milling tool wear inspection by image reconstruction and light reflectance , 2016 .

[29]  Wang Lei,et al.  Mini Milling Cutter Measurement Based on Machine Vision , 2011 .