Effect of plasma treatment on surface chemical-bonding states and electrical properties of polyacrylonitrile nanofibers

Abstract Electrospun polyacrylonitrile (PAN) nanofibers were subjected to surface modification by atmospheric pressure (AP) plasma treatment with reactive gases. There was no damage to the surfaces after this plasma treatment, and no significant changes were observed in the morphologies of the nanofibers. The surface energies of O2- and N2-plasma-treated PAN (abbreviated as OPP and NPP, respectively) nanofibers increased by almost 138.7% and 190.6%, respectively, in comparison with that of an untreated nanofiber (256.6 mJ/m2). The binding energies of both OPP and NPP samples increased through the formation of many hydrophilic bonds involving oxygen. The current–voltage (I–V) characteristics of the nanofibers were determined for the different reactive gases, and the plasma-treated nanofibers showed higher protein immobilization compared to the untreated ones. This result indicates that electrospun PAN nanofibers have the potential to be used in protein biosensor systems.

[1]  Zhi‐Kang Xu,et al.  Surface engineerings of polyacrylonitrile-based asymmetric membranes towards biomedical applications: An overview , 2007 .

[2]  F. Hochart,et al.  Plasma surface treatment of poly(acrylonitrile) films by fluorocarbon compounds , 1999 .

[3]  Limin Zhu,et al.  Surface modification of electrospun polyacrylonitrile nanofiber towards developing an affinity membrane for bromelain adsorption. , 2010 .

[4]  Masuhiro Kogoma,et al.  Improvement in adhesive strength of fluorinated polymer films by atmospheric pressure glow plasma , 2001 .

[5]  Huaiguo Xue,et al.  Amperometric glucose biosensor based on in situ electropolymerized polyaniline/poly(acrylonitrile-co-acrylic acid) composite film , 2008 .

[6]  C. Chan,et al.  Polymer surface modification by plasmas and photons , 1996 .

[7]  J. Bae,et al.  Role of reactive gas in atmospheric plasma for cell attachment and proliferation on biocompatible poly ɛ-caprolactone film , 2008 .

[8]  Surface Characteristics of Plasma‐Treated PLGA Nanofibers , 2007 .

[9]  Zhi‐Kang Xu,et al.  A novel process for the post-treatment of polyacrylonitrile-based membranes: Performance improvement and possible mechanism , 2006 .

[10]  M. Fukuhara,et al.  FT‐IR study of the stabilization reaction of polyacrylonitrile in the production of carbon fibers , 1986 .

[11]  Nuno M Neves,et al.  Surface modification of electrospun polycaprolactone nanofiber meshes by plasma treatment to enhance biological performance. , 2009, Small.

[12]  Shen‐guo Wang,et al.  Bulk and surface modifications of polylactide , 2005, Analytical and bioanalytical chemistry.

[13]  Surface modification of and selective protein attachment to a flexible microarray pattern using atmospheric plasma with a reactive gas. , 2010, Acta biomaterialia.

[14]  Zhi-Kang Xu,et al.  Enzyme immobilization on electrospun polymer nanofibers: An overview , 2009 .

[15]  Huaiguo Xue,et al.  A glucose biosensor based on microporous polyacrylonitrile synthesized by single rare-earth catalyst. , 2002, Biosensors & bioelectronics.

[16]  W-C. Lin,et al.  Surface Modification and Blood Compatibility of Polyacrylonitrile Membrane with Immobilized Chitosan–Heparin Conjugate , 2002 .

[17]  Masa-aki Suzuki,et al.  Plasma modification of polyacrylonitrile ultrafiltration membrane , 2007 .

[18]  Se-Young Jeong,et al.  Physicochemical properties and enhanced cellullar responses of biocompatible polymeric scaffolds treated with atmospheric pressure plasma using O2 gas , 2011 .

[19]  W. Giauque,et al.  TRIFLUOROMETHANE: ENTROPY, LOW TEMPERATURE HEAT CAPACITY, HEATS OF FUSION AND VAPORIZATION, AND VAPOR PRESSURE1 , 1962 .

[20]  Antje J. Baeumner,et al.  Electrospun polylactic acid nanofiber membranes as substrates for biosensor assemblies , 2006 .

[21]  Xiangwu Zhang,et al.  Diameter control of electrospun polyacrylonitrile/iron acetylacetonate ultrafine nanofibers , 2008 .

[22]  George A Burke,et al.  Protein adhesion and cell response on atmospheric pressure dielectric barrier discharge-modified polymer surfaces. , 2010, Acta biomaterialia.

[23]  W. Park,et al.  Stress response of fibroblasts adherent to the surface of plasma-treated poly(lactic-co-glycolic acid) nanofiber matrices. , 2010, Colloids and surfaces. B, Biointerfaces.

[24]  Jiang Chang,et al.  Electrospun nanofibrous materials for tissue engineering and drug delivery , 2010, Science and technology of advanced materials.

[25]  Kh Ghanbari,et al.  Electrochemically fabricated polypyrrole nanofiber-modified electrode as a new electrochemical DNA biosensor. , 2008, Biosensors & bioelectronics.

[26]  Yoshimichi Ohki,et al.  Electrical properties of nitrogen-containing plasma polymer films , 1990 .

[27]  R. Mu,et al.  Electrospun nanofibers of poly(acrylonitrile)/Eu3+ and their photoluminescence properties , 2010 .

[28]  E. Alocilja,et al.  Surface functionalization of electrospun nanofibers for detecting E. coli O157:H7 and BVDV cells in a direct-charge transfer biosensor. , 2010, Biosensors & bioelectronics.

[29]  Xinhua Xu,et al.  ELECTROSPUN POLY (VINYL ALCOHOL)/GLUCOSE OXIDASE BIOCOMPOSITE MEMBRANES FOR BIOSENSOR APPLICATIONS , 2006 .

[30]  Yan Liu,et al.  Surface Energy and Wettability of Plasma-treated Polyacrylonitrile Fibers , 2006 .

[31]  Jiding Li,et al.  Nanofiltration membrane prepared from polyacrylonitrile ultrafiltration membrane by low-temperature plasma: 2. Grafting of styrene in vapor phase , 2005 .

[32]  You Wang,et al.  Carbon Nanotube-Filled Nanofibrous Membranes Electrospun from Poly(acrylonitrile-co-acrylic acid) for Glucose Biosensor , 2009 .