Optimizing structural roof form for life-cycle energy efficiency

Abstract This study evaluates the potential for life-cycle energy savings in buildings through the use of efficient structural roof form. A simulation-based optimization methodology was developed for comparing the energy requirements of reinforced concrete structures based on conventional flat slabs with those employing alternative vaulted spanning elements, in which the required quantities of high embodied-energy materials like steel and cement may be significantly reduced. The modeling framework combines structural and thermal analyses for the respective quantification of embodied and operational energy. It accounts for local conditions influencing material production and transport, code requirements for structural reliability and serviceability, and heating and cooling demands over a 50-year life span. Results clearly show the potential of non-flat structural roof forms to reduce life-cycle energy consumption – with maximum savings of over 40% in embodied energy and of nearly 25% in cumulative life-cycle energy. This model may be implemented from the early design phases for achieving environmentally responsible buildings.

[1]  A. Bejan.  Shape and Structure, from Engineering to Nature , 2000 .

[2]  M. Fesanghary,et al.  Design of low-emission and energy-efficient residential buildings using a multi-objective optimization algorithm , 2012 .

[3]  Joseph F. Kennedy,et al.  The art of natural building : design, construction, resources , 2002 .

[4]  David Pearson.  New Organic Architecture: The Breaking Wave , 2001 .

[5]  Khaled Nassar,et al.  Genetic algorithms for ceiling form optimization in response to daylight levels , 2011 .

[6]  Murray Silverstein,et al.  A Pattern Language , 1977 .

[7]  Rudi Stouffs,et al.  Design explorations of performance driven geometry in architectural design using parametric modeling and genetic algorithms , 2011, Adv. Eng. Informatics.

[8]  Janine M. Benyus,et al.  Biomimicry: Innovation Inspired by Nature , 1997 .

[9]  David Pearlmutter,et al.  A life-cycle energy analysis of building materials in the Negev desert , 2008 .

[10]  N. Nahar,et al.  Studies on solar passive cooling techniques for arid areas , 1999 .

[11]  Raymond J. Cole,et al.  Energy and greenhouse gas emissions associated with the construction of alternative structural systems , 1998 .

[12]  Thomas F. Coleman,et al.  Optimization Toolbox User's Guide , 1998 .

[13]  David Pearlmutter,et al.  Roof Geometry as a Determinant of Thermal Behaviour: A Comparative Study of Vaulted and Flat Surfaces in a Hot-Arid Zone , 1993 .

[14]  Remo Pedreschi.  Form, Force and Structure: A Brief History , 2008 .

[15]  Michael Dickson,et al.  Widespan Roof Structures , 2000 .

[16]  Hugo Hens,et al.  Life Cycle Optimization of Extremely Low Energy Dwellings , 2007 .

[17]  Petr Hájek,et al.  ENVIRONMENTAL ASSESSMENT OF FLOOR STRUCTURES FROM FIBRE CONCRETE - STUDY , 2007 .

[18]  Fay,et al.  Life Cycle Energy Analysis - A Measure of the Environmental Impact of Buildings , 1998 .

[19]  A. Sarja.  Integrated Life-Cycle Design of Materials and Structures ILCDES 2000 , 2000 .

[20]  Luisa Caldas.  Generation of energy-efficient architecture solutions applying GENE_ARCH: An evolution-based generative design system , 2008, Adv. Eng. Informatics.

[21]  H. Binici,et al.  Investigation of fibre reinforced mud brick as a building material , 2005 .

[22]  T M Mulroy.  FUEL SAVINGS FROM COMPUTERISED TRAFFIC CONTROL SYSTEMS. ENERGY EFFICIENCY IN LAND TRANSPORT. PROCEEDINGS OF A SEMINAR ORGANISED BY THE COMMISSION OF THE EUROPEAN COMMUNITIES, DIRECTORATE GENERAL FOR ENERGY, LUXEMBOURG, MAY 16-18, 1988 , 1989 .

[23]  Moncef Krarti,et al.  Genetic-algorithm based approach to optimize building envelope design for residential buildings , 2010 .

[24]  Weimin Wang,et al.  An object-oriented framework for simulation-based green building design optimization with genetic algorithms , 2005, Adv. Eng. Informatics.

[25]  John Ochsendorf.  Sustainable Structural Design: Lessons from History , 2004 .

[26]  Svetlana Pushkar,et al.  A methodology for design of environmentally optimal buildings by variable grouping , 2005 .

[27]  Weimin Wang,et al.  Floor shape optimization for green building design , 2006, Adv. Eng. Informatics.

[28]  Isaac A. Meir,et al.  Thermal performance of non air-conditioned buildings with vaulted roofs in comparison with flat roofs , 2006 .

[29]  Weimin Wang.  A simulation-based optimization system for green building design , 2005 .

[30]  Jun Wu,et al.  An integrated approach to shape and laminate stacking sequence optimization of free-form FRP shells , 2006 .

[31]  David Coley,et al.  Low-energy design: combining computer-based optimisation and human judgement , 2002 .

[32]  J. Ochsendorf,et al.  As Hangs the Flexible Line: Equilibrium of Masonry Arches , 2006 .

[33]  Jonathan A. Wright,et al.  Optimization of building thermal design and control by multi-criterion genetic algorithm , 2002 .

[34]  Keigo Akimoto,et al.  Diffusion of energy efficient technologies and CO2 emission reductions in iron and steel sector , 2007 .

[35]  Manolis Papadrakakis,et al.  Structural optimization: A tool for evaluating seismic design procedures , 2006 .

[36]  Manfred Lenzen,et al.  Embodied energy in buildings : wood versus concrete - reply to Börjesson and Gustavsson , 2002 .

[37]  宮本 文穂,et al.  RILEM/CIB/ISO International Symposium on Integrated Life-Cycle Design of Materials and Structures(ILCDES 2000)参加報告 , 2000 .

[38]  Jacques Besson,et al.  An object-oriented simulation–optimization interface , 2003 .

[39]  Isaac A. Meir,et al.  Adaptive architecture: integrating low-energy technologies for climate control in the desert , 1997 .

[40]  Heino Engel,et al.  Tragsysteme = Structure systems , 1968 .

[41]  Erik Johansson,et al.  Construction and Environment - Improving energy efficiency , 2000 .

[42]  Jérôme Henri Kämpf,et al.  Optimisation of building form for solar energy utilisation using constrained evolutionary algorithms , 2010 .

[43]  Ravi Prakash,et al.  Life cycle energy analysis of buildings: An overview , 2010 .

[44]  Leslie K. Norford,et al.  Genetic Algorithms for Optimization of Building Envelopes and the Design and Control of HVAC Systems , 2003 .

[45]  Derek Clements-Croome,et al.  Sustainable building solutions: a review of lessons from the natural world , 2005 .

[46]  Xia Liu,et al.  Genetic evolutionary structural optimization , 2008 .