Three-Dimensional Modelling and Finite Element Analysis of an Ankle External Fixator

The use of ankle external fixator to treat pilon fracture Type III is popular amongst surgeons as it can reduce complications such as non-union and mal-union. Even though configurations of the connecting bars are important, the material also plays a major factor for a successful outcome. In this paper, the Delta external fixator with simulated ankle pilon fractures Type III were modelled and analysed under two different materials; titanium alloy and stainless steel. The finite element model includes tibia, fibula, talus, calcaneus, cuboid, navicular, three cuneiforms and five metatarsals bone. To simulate the pilon fractures Type III, a cutting segment was utilised. The ligaments were assigned with linear spring properties and cartilages were modelled using Mooney-Rivlin hyper-elastic behaviour. The Delta external fixator was designed using a three-dimensional software with two different material properties - titanium alloy and stainless steel. High von Mises stress concentrated at the pin-bone interface with the highest value observed for the titanium fixation. The results also showed less deformation for the stainless steel compared to titanium.

[1]  E. Crelin.  Atlas of Human Anatomy , 1965, The Yale Journal of Biology and Medicine.

[2]  R D Crowninshield,et al.  An analysis of soft tissue loading in the foot--a preliminary report. , 1981, Bulletin of prosthetics research.

[3]  S. Siegler,et al.  The Mechanical Characteristics of the Collateral Ligaments of the Human Ankle Joint* , 1988, Foot & ankle.

[4]  A. Sarmiento,et al.  Tibial Plafond Fractures: Errors, Complications, and Pitfalls in Operative Treatment , 1990 .

[5]  S. Woo,et al.  Tensile properties of the interosseous membrane of the human forearm , 1996, Proceedings of the 1996 Fifteenth Southern Biomedical Engineering Conference.

[6]  P. Gaston,et al.  Fractures of the tibia. Can their outcome be predicted? , 1999, The Journal of bone and joint surgery. British volume.

[7]  D. Nunamaker,et al.  Evaluation of a tapered-sleeve transcortical pin to reduce stress at the bone-pin interface in metacarpal bones obtained from horses. , 2001, American journal of veterinary research.

[8]  Stephen M Belkoff,et al.  A Biomechanical Evaluation of the Tibiofibular and Tibiotalar Ligaments of the Ankle , 2003, Foot & ankle international.

[9]  S. Gorsse,et al.  Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements , 2003 .

[10]  Mark Taylor,et al.  Finite element analysis of the initial stability of ankle arthrodesis with internal fixation: flat cut versus intact joint contours. , 2003, Clinical biomechanics.

[11]  D. Dirschl,et al.  Factors Affecting Outcome in Tibial Plafond Fractures , 2004, Clinical orthopaedics and related research.

[12]  H. Arslan,et al.  Non-reducible, open tibial plafond fractures treated with a circular external fixator (is the current classification sufficient for identifying fractures in this area?). , 2005, Injury.

[13]  C. Milgrom,et al.  Reliable simulations of the human proximal femur by high-order finite element analysis validated by experimental observations. , 2007, Journal of biomechanics.

[14]  Peter C Liacouras,et al.  Computational modeling to predict mechanical function of joints: application to the lower leg with simulation of two cadaver studies. , 2007, Journal of biomechanical engineering.

[15]  Sofia Heintz,et al.  Static optimization of muscle forces during gait in comparison to EMG-to-force processing approach. , 2007, Gait & posture.

[16]  Zuoping Li,et al.  Biomechanical response of the pubic symphysis in lateral pelvic impacts: a finite element study. , 2007, Journal of biomechanics.

[17]  Semih Benli,et al.  Evaluation of bone plate with low-stiffness material in terms of stress distribution. , 2008, Journal of biomechanics.

[18]  Wei Sun,et al.  Cyclic thermo-mechanical material modelling and testing of 316 stainless steel , 2010 .

[19]  Joseph M. Iaquinto,et al.  Computational model of the lower leg and foot/ankle complex: application to arch stability. , 2010, Journal of biomechanical engineering.

[20]  Seung‐Hwan Chang,et al.  Bio-mechanical analysis of a fractured tibia with composite bone plates according to the diaphyseal oblique fracture angle , 2011 .

[21]  D. Sabat,et al.  The results of two-staged operative management of pilon fractures—a review of 25 cases , 2011 .

[22]  P. Pankaj,et al.  Bone properties affect loosening of half-pin external fixators at the pin-bone interface. , 2012, Injury.