Power System Capacitors

[1]  H. Chiang,et al.  Capacitor placement and real time control in large-scale unbalanced distribution systems: loss reduction formula, problem formulation, solution methodology and mathematical justification , 1996 .

[2]  G. G. Karady,et al.  Continuously regulated series capacitor , 1993 .

[3]  S. J. Merhej,et al.  Harmonic filtering for the offshore industry , 1992, [1992] Record of Conference Papers Industry Applications Society 39th Annual Petroleum and Chemical Industry Conference.

[4]  Gregory Levitin,et al.  Optimal capacitor allocation in distribution systems using a genetic algorithm and a fast energy loss computation technique , 2000 .

[5]  S. O. Faried,et al.  Stochastic Evaluation of Voltage Sags in Series Capacitor Compensated Radial Distribution Systems , 2002, IEEE Power Engineering Review.

[6]  R. P. Stratford.  Rectifier Harmonics in Power Systems , 1980, IEEE Transactions on Industry Applications.

[7]  A. E. Emanuel,et al.  Passive shunt harmonic filters for low and medium voltage: a cost comparison study , 1996 .

[8]  E. J. Currence,et al.  Harmonic resonance at a medium sized industrial plant , 1994 .

[9]  A. F. Imece,et al.  Feasibility of thyristor controlled series capacitor for distribution substation enhancements , 1994 .

[10]  William F. Hoenigmann.  Surge Protection for AC Motors-When Are Protective Devices Required? , 1983, IEEE Transactions on Industry Applications.

[11]  B. Kennedy.  Optimize placement of in-plant power-factor correction capacitors , 1995 .

[12]  Yahia Baghzouz,et al.  Series capacitor placement on transmission lines with slightly distorted currents , 1994, Proceedings of IEEE/PES Transmission and Distribution Conference.

[13]  R. G. Andrei.  A novel fuseless capacitor bank design using conventional single-bushing capacitors , 1999 .

[14]  S. Ihara,et al.  Distribution series capacitor with high-energy varistor protection , 1993 .

[15]  S. Ihara,et al.  Distribution feeder modification to service both sensitive loads and large drives , 1991, Proceedings of the 1991 IEEE Power Engineering Society Transmission and Distribution Conference.

[16]  J. D. Selman,et al.  Capacitor switching and transformer transients , 1988 .

[17]  R. Sevigny,et al.  Capacitor measurement in the substation environment: a new approach , 2000, 2000 IEEE ESMO - 2000 IEEE 9th International Conference on Transmission and Distribution Construction, Operation and Live-Line Maintenance Proceedings. ESMO 2000 Proceedings. Global ESMO 2000. The Pow.

[18]  R. Lord,et al.  Technical considerations concerning the use of magnetic potential transformers on MOV series-compensated transmission network , 1994 .

[19]  C.E. McCoy,et al.  Characteristics and measurement of capacitor switching at medium voltage distribution level , 1993, Industry Applications Society 40th Annual Petroleum and Chemical Industry Conference.

[20]  T. Takekoshi,et al.  Molecular modeling of polymers for high energy storage capacitor applications , 1992, IEEE 35th International Power Sources Symposium.

[21]  D. A. Gonzalez,et al.  Design of Filters to Reduce Harmonic Distortion in Industrial Power Systems , 1987, IEEE Transactions on Industry Applications.

[22]  A. Kong.  Predicting life from analysis of field aged 500 kV series capacitors , 1996 .

[23]  A. F. Imece,et al.  Effectiveness of pre-insertion inductors for mitigating remote overvoltages due to shunt capacitor energization , 1993 .

[24]  M. F. McGranaghan,et al.  Designing harmonic filters for adjustable speed drives to comply with IEEE-519 harmonic limits , 1997, 1997 Rural Electric Power Conference (Cat. No.97CH36079).

[25]  S. A. Miske.  Considerations for the application of series capacitors to radial power distribution circuits , 2001 .

[26]  H.G. Gerlach.  Resonant Power Supply Kit System for High Voltage Testing , 1991, IEEE Power Engineering Review.

[27]  Alvin L. Day,et al.  Methods of Evaluation of Harmonic Levels in Industrial Plant Distribution Systems , 1987, IEEE Transactions on Industry Applications.

[28]  R. G. Andrei,et al.  Bridge capacitor bank design and operation , 1996 .

[29]  M. Pereira,et al.  Assessing the FACTS at Kayenta , 1993 .

[30]  Davide Fabiani,et al.  The effect of nonsinusoidal voltage on intrinsic aging of cable and capacitor insulating materials , 1999 .

[31]  William B. Duff.  Economic AC Capacitors , 2002, IEEE Power Engineering Review.

[32]  A. F. Mistr,et al.  Reactive management a key to survival in the 1990s , 1995 .

[33]  Jaewon Chang,et al.  Time-optimal control of power systems requiring multiple switchings of series capacitors , 1998 .

[34]  C.-C. Liu,et al.  Damping torsional oscillations using a SIMO static VAR controller , 1993 .

[35]  Ian Dobson,et al.  Dynamic response of a thyristor controlled switched capacitor , 1994 .

[36]  R. Natarajan,et al.  Starting Transient Current of Induction Motors Without and With Terminal Capacitors , 1991, IEEE Power Engineering Review.

[37]  A. A. El-Keib,et al.  A graph search algorithm for optimal placement of fixed and switched capacitors on radial distribution systems , 2000 .

[38]  A. Y. Chikhani,et al.  Classification of capacitor allocation techniques , 2000 .

[39]  Shigemitsu Okabe,et al.  Techniques for diagnosing deterioration of oil-impregnated paper-film power capacitors , 1997 .

[40]  G. Thumm,et al.  Advanced series compensator enhances flexibility for AC transmission systems , 1993 .

[41]  A. Joshi,et al.  Torsional Interaction Studies on a Power System Compensated by SSSC and Fixed Capacitor , 2002, IEEE Power Engineering Review.

[42]  Ibrahim El-Amin,et al.  Optimal shunt compensators at nonsinusoidal busbars , 1995 .

[43]  L. Morgan,et al.  Harmonic filter design using actual recorded data , 1992, [Proceedings] 1992 Rural Electric Power Conference. Papers presented at the 36th Annual Conference.

[44]  Thomas J. Overbye,et al.  Method to improve transmission system voltage stability , 1994, Proceedings of IEEE/PES Transmission and Distribution Conference.

[45]  C. W. Taylor,et al.  CAPS: improving power system stability using the time-overvoltage capability of large shunt capacitor banks , 1996 .

[46]  Jaewon Chang,et al.  Time-optimal series capacitor control for damping interarea modes in interconnected power systems , 1997 .

[47]  W. C. Bloomquist.  Capacitors for industry , 1950 .

[48]  G. G. Karady,et al.  Investigations of an advanced form of series compensation , 1994 .

[49]  R. J. Piwko,et al.  Effectiveness of thyristor controlled series capacitor in enhancing power system dynamics: an analog simulator study , 1994 .

[50]  R. Lord,et al.  Modeling MOV-protected series capacitors for short-circuit studies , 1993 .

[51]  Ching-Jung Liao,et al.  Investigation and mitigation of harmonic amplification problems caused by single-tuned filters , 1998 .

[52]  Chika O. Nwankpa,et al.  Identification of capacitor position in a radial system , 1999 .

[53]  F. Unterlass,et al.  Digital protection schemes of advanced series compensators , 1993 .

[54]  R. R. Mohler,et al.  Variable-structure facts controllers for power system transient stability , 1992 .

[55]  Y. Kazachkov.  Fundamentals of a series capacitor commutated HVDC terminal , 1998 .

[56]  R. Natarajan,et al.  A 230 KV power factor correction installation taking into account the low voltage filters , 1999 .

[57]  Akihiko Yokoyama,et al.  Stabilizing control of variable impedance power systems: Applications to variable series capacitor systems , 1993 .

[58]  D. A. Woodford.  Solving the ferroresonance problem when compensating a DC converter station with a series capacitor , 1996 .

[59]  D. J. McDonald,et al.  Modeling and testing of a thyristor for thyristor controlled series compensation (TCSC) , 1994 .

[60]  G. E. Lee,et al.  BPA's Pacific AC intertie series capacitors: experience, equipment and protection , 1996 .

[61]  F. Iliceto,et al.  TRVs across circuit breakers of series compensated lines-status with present technology and analysis for the Turkish 420 kV grid , 1991 .

[62]  R. G. Andrei,et al.  World's first commercial bridge capacitor bank installation on the American Electric Power System , 2001 .

[63]  S. R. Mendis,et al.  Capacitor overcurrent protection for industrial distribution systems , 1996 .

[64]  C. M. Fallon,et al.  Harmonics and transient overvoltages due to capacitor switching , 1992, [Proceedings] 1992 Rural Electric Power Conference. Papers presented at the 36th Annual Conference.

[65]  P. W. Hammond.  A harmonic filter installation to reduce voltage distortion from static power converters , 1988 .

[66]  J.F. Witte,et al.  Damaging long-term overvoltages on industrial capacitor banks due to transformer energization inrush currents , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[67]  P. Marannino,et al.  Optimal capacitor placement using deterministic and genetic algorithms , 1999 .

[68]  R.D. Argent,et al.  Power factor correction and harmonic mitigation in a thyristor controlled glass melter , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[69]  Aniruddha M. Gole,et al.  Capacitor commutated converter circuit configurations for DC transmission , 1998 .

[70]  Thomas Paine Wood.  A microcomputer based data acquisition system , 1977 .

[71]  M. Noroozian,et al.  Damping of power system oscillations by use of controllable components , 1994 .

[72]  L. N. Hannett,et al.  Geomagnetic effects modelling for the PJM interconnection system. II. Geomagnetically induced current study results , 1992 .

[73]  Mark F. McGranaghan,et al.  Evaluation of Switching Concerns Associated with 345 KV Shunt Capacitor Applications , 1986 .

[74]  C. B. Cooper,et al.  IEEE Recommended Practice for Electric Power Distribution for Industrial Plants , 1987 .