Genetic Algorithm Based Optimization of PCM Based Heat Sinks and Effect of Heat Sink Parameters on Operational Time

Using an approach that couples genetic algorithm (GA) with conventional numerical simulations, optimization of the geometric configuration of a phase-change material based heat sink (PBHS) is performed in this paper. The optimization is done to maximize the sink operational time (SOT), which is the time for the top surface temperature of the PBHS to reach the critical electronics temperature (CET). An optimal solution for this complex multiparameter problem is sought using GA, with the standard numerical simulation seeking the SOT forming a crucial step in the algorithm. For constant heat dissipation from the electronics (constant heat flux) and for three typical PBHS depths (A), predictive empirical relations are deduced from the GA based simulation results. These correlations relate the SOT to the amount of phase change material to be used in the PBHS (φ), the PBHS depth (A), and the heat-spreader thickness (s), a hitherto unconsidered variable in such designs, to the best of the authors' knowledge. The results show that for all of the typical PBHS depths considered, the optimal heat-spreader thickness is 2.5% of the PBHS depth. The developed correlations predict the simulated results within 4.6% for SOT and 0.32% for φ and empowers one to design a PBHS configuration with maximum SOT for a given space restriction or the most compact PBHS design for a given SOT.

[1]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[2]  S. Krishnan,et al.  Analysis of a phase change energy storage system for pulsed power dissipation , 2004, IEEE Transactions on Components and Packaging Technologies.

[3]  S. Ghamaty,et al.  New technology for thermoelectric cooling , 2004, Twentieth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (IEEE Cat. No.04CH37545).

[4]  I. M. Bugaje,et al.  Enhancing the thermal response of latent heat storage systems , 1997 .

[5]  Sushil H. Bhavnani,et al.  Thermal Challenges in Next-Generation Electronic Systems , 2008 .

[6]  Pedro Larrañaga,et al.  Genetic Algorithms for the Travelling Salesman Problem: A Review of Representations and Operators , 1999, Artificial Intelligence Review.

[7]  J. Leland,et al.  Optimization of a phase change heat sink for extreme environments , 2003, Ninteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2003..

[8]  K. Srinivasan,et al.  A numerical model for heat sinks with phase change materials and thermal conductivity enhancers , 2006 .

[9]  Yogendra Joshi,et al.  Application of Phase Change Materials to Thermal Control of Electronic Modules: A Computational Study , 1997 .

[10]  L. Chow,et al.  Thermal conductivity enhancement for phase change storage media , 1989 .

[11]  Ephraim M Sparrow,et al.  ANALYSIS OF MULTIDIMENSIONAL CONDUCTION PHASE CHANGE VIA THE ENTHALPY MODEL. , 1975 .

[12]  G. Ziskind,et al.  Numerical investigation of a PCM-based heat sink with internal fins , 2005 .

[13]  S. Krishnan,et al.  A novel hybrid heat sink using phase change materials for transient thermal management of electronics , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[14]  C. Balaji,et al.  Method to improve geometry for heat transfer enhancement in PCM composite heat sinks , 2005 .

[15]  Suresh V. Garimella,et al.  Thermal Management of Transient Power Spikes in Electronics—Phase Change Energy Storage or Copper Heat Sinks? , 2004 .

[16]  John H. Holland,et al.  Adaptation in Natural and Artificial Systems: An Introductory Analysis with Applications to Biology, Control, and Artificial Intelligence , 1992 .

[17]  Y. Çengel.  Heat Transfer: A Practical Approach , 1997 .

[18]  Ning Zheng,et al.  A Hybrid Thermal Energy Storage Device, Part 1: Design Methodology , 2004 .

[19]  Urmila M. Diwekar,et al.  Optimal Design of Heat Exchangers: A Genetic Algorithm Framework , 1999 .

[20]  Kai Sirén,et al.  Approximate analytical model for solidification in a finite PCM storage with internal fins , 2003 .

[21]  R. Hilbert,et al.  Multi-objective shape optimization of a heat exchanger using parallel genetic algorithms , 2006 .

[22]  Cristina H. Amon,et al.  Thermal analyses of a PCM thermal control unit for portable electronic devices: experimental and numerical studies , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).

[23]  Zbigniew Michalewicz,et al.  Genetic Algorithms + Data Structures = Evolution Programs , 1996, Springer Berlin Heidelberg.

[24]  Richard A. Wirtz,et al.  A Hybrid Thermal Energy Storage Device, Part 2: Thermal Performance Figures of Merit , 2004 .

[25]  Suresh V. Garimella,et al.  Thermal Challenges in Next-Generation Electronic Systems , 2003, IEEE Transactions on Components and Packaging Technologies.

[26]  J. Murthy,et al.  A Two-Temperature Model for Solid/Liquid Phase Change in Metal Foams , 2005 .