Electromagnetic wave shielding/absorption performances of cementitious composites incorporating carbon nanotube metamaterial with helical chirality

Helical carbon nanotubes, a type of chiral metamaterial, were employed to investigate their effects as well as the mechanisms to electromagnetic wave shielding and absorption performances of cementitious composites over the frequency range from 2 GHz to 18 GHz. The results demonstrate that the best electromagnetic wave shielding effectiveness (SE) of cementitious composites filled with 7.5 wt.% helical carbon nanotubes is 1.39 times of that of cementitious composites without helical carbon nanotubes. The minimum reflectivity in 20 mm-thickness cementitious composites with 4.5 wt.% helical carbon nanotubes is 2.7 times of that of cementitious composites without helical carbon nanotubes. Cementitious composites with 7.5 wt.% helical carbon nanotubes have smallest matching thickness and the minimum reflectivity of −41.0 dB. By analyzing electromagnetic parameters and conductive mechanisms, it is found that helical carbon nanotubes mainly affect reflection loss ratio in electromagnetic wave shielding and the dielectric loss in electromagnetic wave absorption. Both parameters are attributed to the enhanced conductivity with the increase of helical carbon nanotubes. The percolation zone ranges from 1.5 wt.% to 7.5 wt.% for alternating current resistivity, with conductive path transferring from ion conduction to electron conduction as the content of helical carbon nanotubes increases. Additionally, incorporating helical carbon nanotubes essentially does not cause the decrease in compressive strength of cementitious composites. The results recommend that cementitious composites incorporating carbon nanotube metamaterial with helical chirality present high electromagnetic performances with satisfactory compressive strength.

[1]  Heeyoung Lee,et al.  Enhanced mechanical and heating performance of multi-walled carbon nanotube-cement composites fabricated using different mixing methods , 2019, Composite Structures.

[2]  X. Jian,et al.  Carbon nanotube buckypaper and buckypaper/polypropylene composites for high shielding effectiveness and absorption-dominated shielding material , 2019, Composites Science and Technology.

[3]  Hyeong-Ki Kim,et al.  The role of carbon nanotube on hydration kinetics and shrinkage of cement composite , 2019, Composites Part B: Engineering.

[4]  Jinping Ou,et al.  Nano-Engineered Cementitious Composites , 2019 .

[5]  H. Lee,et al.  Fabrication and design of electromagnetic wave absorber composed of carbon nanotube-incorporated cement composites , 2018, Composite Structures.

[6]  Zhanhu Guo,et al.  Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding , 2018, Carbon.

[7]  Guowei Ma,et al.  Electromagnetic and microwave absorbing properties of cementitious composite for 3D printing containing waste copper solids , 2018, Cement and Concrete Composites.

[8]  B. Li,et al.  Electromagnetic wave absorption properties of helical carbon fibers and expanded glass beads filled cement-based composites , 2018, Composites Part A: Applied Science and Manufacturing.

[9]  N. Yan,et al.  Fabrication of a flexible electromagnetic interference shielding Fe3O4@reduced graphene oxide/natural rubber composite with segregated network , 2018, Chemical Engineering Journal.

[10]  B. Li,et al.  Electromagnetic wave absorption properties of cement based composites using helical carbon fibers as absorbent , 2018 .

[11]  Xun Yu,et al.  Comparison of compressive strength and electrical resistivity of cementitious composites with different nano- and micro-fillers , 2018 .

[12]  J. Ou,et al.  Mechanical properties and reinforcing mechanisms of cementitious composites with different types of multiwalled carbon nanotubes , 2017 .

[13]  Jianjun Shi,et al.  Fabrication of 3D net-like MWCNTs/ZnFe2O4 hybrid composites as high-performance electromagnetic wave absorbers , 2017 .

[14]  Shi-feng Huang,et al.  Cement-based composites endowed with novel functions through controlling interface microstructure from Fe3O4@SiO2 nanoparticles , 2017 .

[15]  J. Ou,et al.  Smart and Multifunctional Concrete Toward Sustainable Infrastructures , 2017 .

[16]  Jinping Ou,et al.  Nano-core effect in nano-engineered cementitious composites , 2017 .

[17]  Alida Mazzoli,et al.  Electromagnetic properties of carbon nanotube reinforced concrete composites for frequency selective shielding structures , 2017 .

[18]  E. B. Naidoo,et al.  The properties and applications of helical carbon fibers and related materials: A review , 2016 .

[19]  Gang Li,et al.  Fe3C/helical carbon nanotube hybrid: Facile synthesis and spin-induced enhancement in microwave-absorbing properties , 2016 .

[20]  Zhenjun Wang,et al.  Investigation on electromagnetic and microwave absorption properties of copper slag-filled cement mortar , 2016 .

[21]  Yang Jiang,et al.  Enhanced microwave absorption properties and mechanism of core/shell structured magnetic nanoparticles/carbon-based nanohybrids , 2016 .

[22]  D. Hui,et al.  Remarkable improvement in microwave absorption by cloaking a micro-scaled tetrapod hollow with helical carbon nanofibers. , 2015, Physical chemistry chemical physics : PCCP.

[23]  Baoguo Han,et al.  Intrinsic self-sensing concrete and structures: A review , 2015 .

[24]  K. Zhou,et al.  Microwave absorption properties of helical carbon nanofibers-coated carbon fibers , 2013 .

[25]  Govind,et al.  Multiwalled carbon nanotube/cement composites with exceptional electromagnetic interference shielding properties , 2013 .

[26]  N. A. Siddiqui,et al.  Correlation between electrokinetic potential, dispersibility, surface chemistry and energy of carbon nanotubes , 2011 .

[27]  Yawen Dai,et al.  Electromagnetic wave absorbing characteristics of carbon black cement-based composites , 2010 .

[28]  Hejun Li,et al.  Influence of CVI treatment of carbon fibers on the electromagnetic interference of CFRC composites , 2008 .

[29]  Jiurong Liu,et al.  Gigahertz range electromagnetic wave absorbers made of amorphous-carbon-based magnetic nanocomposites , 2005 .

[30]  S. Motojima,et al.  Electromagnetic wave absorption properties of carbon microcoils/PMMA composite beads in W bands , 2003 .