Acoustic emission and microstructural changes in fly ash geopolymer concretes exposed to simulated fire

Two fly ash-based geopolymer concretes with quartz aggregates or with expanded clay (lightweight) aggregates were exposed to the ISO 834-1 standard fire curve in a small-scale fire test set-up. Acoustic emission measurements during fire exposure and subsequent cooling were employed to study spalling events and cracking during the tests. Optical microscopy and additional acoustic measurements were conducted after the testing to better understand the crack propagation in the samples. The testing revealed that neither of the concretes were susceptible to spalling, which is particularly notable for the concrete with quartz aggregates, as it is a high-strength concrete. This behavior is attributed to the relatively high permeability of the concretes and their low amount of chemically bound water. Significant crack formation was detected only around the temperature of the α–β quartz transition (573 °C) and on cooling. Because of aggregate deformations at the quartz transition temperature, deterioration after heating was more significant in the geopolymer concrete with quartz aggregates. Crack formation also occurred in the concrete with expanded clay aggregates, caused by shrinkage of the geopolymer paste on cooling. Acoustic emission measurements proved to be a valuable tool to investigate processes during high temperature exposure.

[1]  Bertil R. R. Persson,et al.  Fire resistance of self-compacting concrete, SCC , 2004 .

[2]  Ulrich Schneider,et al.  Concrete at High Temperatures -- A General Review* , 1988 .

[3]  Daniel Quenard,et al.  Spalling and pore pressure in HPC at high temperatures , 2000 .

[4]  W. Rickard,et al.  15 – Thermal properties of geopolymers , 2009 .

[5]  Kristian Dahl Hertz,et al.  Limits of spalling of fire-exposed concrete , 2003 .

[6]  Kristian Dahl Hertz,et al.  DANISH INVESTIGATIONS ON SILICA FUME CONCRETES AT ELEVATED TEMPERATURES , 1992 .

[7]  Jadambaa Temuujin,et al.  Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition , 2012 .

[8]  William D.A. Rickard,et al.  In-situ thermo-mechanical testing of fly ash geopolymer concretes made with quartz and expanded clay aggregates , 2016 .

[9]  W. Rickard,et al.  Thermally Induced Microstructural Changes in Fly Ash Geopolymers: Experimental Results and Proposed Model , 2015 .

[10]  J. Wastiels,et al.  Low-temperature synthesized aluminosilicate glasses , 1996 .

[11]  Grant C. Lukey,et al.  Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C , 2007 .

[12]  J. Deventer,et al.  The Effects of Temperature on the Local Structure of Metakaolin‐Based Geopolymer Binder: A Neutron Pair Distribution Function Investigation , 2010 .

[13]  G Sanjayan,et al.  SPALLING OF HIGH-STRENGTH SILICA FUME CONCRETE IN FIRE , 1993 .

[14]  G. Khoury.  Effect of fire on concrete and concrete structures , 2000 .

[15]  P. Sarker,et al.  Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete , 2014 .

[16]  Pierre Kalifa,et al.  High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure , 2001 .

[17]  A. Fernández-Jiménez,et al.  New Cementitious Materials Based on Alkali-Activated Fly Ash: Performance at High Temperatures , 2008 .

[18]  James R. Lawson,et al.  Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete , 2001 .

[19]  Kwesi Sagoe-Crentsil,et al.  Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures , 2007 .

[20]  Kenneth J. D. MacKenzie,et al.  Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate , 2003 .

[21]  J. Sanjayan,et al.  Factors influencing softening temperature and hot-strength of geopolymers , 2012 .

[22]  Rupert J. Myers,et al.  X-ray microtomography shows pore structure and tortuosity in alkali-activated binders , 2012 .

[23]  W. Rickard,et al.  Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions , 2013 .

[24]  J. Sanjayan,et al.  Effect of aggregate size on spalling of geopolymer and Portland cement concretes subjected to elevated temperatures , 2012 .

[25]  O. Kayali,et al.  Performance of fly ash based geopolymer concrete made using non-pelletized fly ash aggregates after exposure to high temperatures , 2015 .

[26]  Long T. Phan,et al.  Pore pressure and explosive spalling in concrete , 2008 .

[27]  Jay G. Sanjayan,et al.  Geopolymer and Portland cement concretes in simulated fire , 2011 .

[28]  E. Vance,et al.  Disposition of water in metakaolinite based geopolymers , 2012 .