An Eight-Way Power Combiner Based on a Transition Between Rectangular Waveguide and Multiple Microstrip Lines

This paper presents a broadband and low-loss power combiner based on a transition between eight microstrip lines and a rectangular waveguide. A tray-type structure is utilized in this design and all the trays are stacked up together along the narrow wall of the rectangular waveguide to take advantage of its uniform electric field distribution. The combiner has a wide bandwidth of 5.8-8.2 GHz, which is only limited by the operating frequency range of the WR-137 rectangular waveguide. The measured output return loss is better than 22 dB over the whole frequency range. The measured insertion loss of a back-to-back configuration is less than 0.78 dB, which is equivalent to a combining efficiency of 91.4% for a single combiner. The measured isolations between input ports are better than 12 dB. With eight microstrip input ports where three-terminal solid-state power amplifier devices are integrated and with a rectangular waveguide output port, the proposed structure is very suitable for high power-combining applications.

[1]  Ke Wu,et al.  Spatial power amplifier using a passive and active TEM waveguide concept , 2003 .

[2]  Jiang Xia,et al.  A 159-W X-Band Spatially Combined Solid-State Amplifier , 2009 .

[3]  Gabriel M. Rebeiz,et al.  Some important properties of waveguide junction generalized scattering matrices in the context of the mode matching technique , 1994 .

[4]  Youngwoo Kwon,et al.  1.6- and 3.3-W power-amplifier modules at 24 GHz using waveguide-based power-combining structures , 2000 .

[5]  Xiang Li,et al.  A new type of ka-band waveguide-based power-combining structures , 2008, 2008 International Conference on Microwave and Millimeter Wave Technology.

[6]  R. Safavi-Naini,et al.  On Solving Waveguide Junction Scattering Problems by the Conservation of Complex Power Technique , 1981 .

[7]  Nai-Shuo Cheng,et al.  20 watt spatial power combiner in waveguide , 1998, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192).

[8]  Zhongxiang Shen,et al.  A Suspended-Substrate Ku-Band Symmetric Radial Power Combiner , 2011, IEEE Microwave and Wireless Components Letters.

[9]  Robert A. York,et al.  A 60-watt X-band spatially combined solid-state amplifier , 1999, IMS 1999.

[10]  Youngwoo Kwon,et al.  A 1.6 W power amplifier module at 24 GHz using new waveguide-based power combining structures , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[11]  F. Takeda,et al.  Waveguide Power Divider Using Metallic Septum with Resistive Coupling Slot , 1982, 1982 IEEE MTT-S International Microwave Symposium Digest.

[12]  K. J. Russell,et al.  Microwave Power Combining Techniques , 1979 .

[13]  J. S. Hornsby,et al.  Fourier analysis of a dielectric-loaded waveguide with a microstrip line , 1969 .

[14]  Robert A. York,et al.  Development of K-band spatial combiner using active array modules in an oversized rectangular waveguide , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[15]  Raj Mittra,et al.  A New Technique for the Analysis of the Dispersion Characteristics of Microstrip Lines , 1970 .

[16]  Robert A. York,et al.  Broadband spatially combined amplifier array using tapered slot transitions in waveguide , 1997 .

[17]  Zhongxiang Shen,et al.  A rectangular waveguide to multiple microstrip lines transition for power combining application , 2009, 2009 Asia Pacific Microwave Conference.

[18]  Quan Xue,et al.  Millimeter-Wave Power Amplifier Based on Coaxial-Waveguide Power-Combining Circuits , 2010, IEEE Microwave and Wireless Components Letters.

[19]  A. Alexanian,et al.  Broadband waveguide-based spatial combiners , 1997, 1997 IEEE MTT-S International Microwave Symposium Digest.

[20]  Anand Gopinath,et al.  Numerical Analysis of a Dielectric-Loaded Waveguide with a Microstrip Line-Finite-Difference Methods , 1969 .

[21]  Cheng Sun,et al.  Millimeter-Wave Power-Combining Techniques , 1983 .

[22]  Quan Xue,et al.  Planar Probe Coaxial-Waveguide Power Combiner/Divider , 2009, IEEE Transactions on Microwave Theory and Techniques.

[23]  M. Amjadi,et al.  Design of a Broadband Eight-Way Coaxial Waveguide Power Combiner , 2012, IEEE Transactions on Microwave Theory and Techniques.