Effects of a photo-assisted electrochemical etching process removing dry-etching damage in GaN

We investigated the ability of a photo-assisted electrochemical (PEC) etching process to remove the damage that dry etching causes in the near-surface region of GaN samples. The process consists of anodic oxidation of the GaN surface and subsequent dissolution of the oxide with a chemical treatment, and the extent of the PEC reactions depends on the total charge density transferred in them. The PEC process was conducted for samples prepared with various dry-etching conditions followed by fabrication of Schottky barrier diodes (SBDs) and metal–insulator–semiconductor (MIS) capacitors. The PEC process greatly improved the barrier height, ideality factor, and reverse leakage current of SBDs. Capacitance–voltage measurements of MIS capacitors revealed that the densities of interface states and discrete traps were both reduced by the PEC process. The results obtained here show that the PEC process can remove dry-etching damage from the GaN surface.

[1]  F. Horikiri,et al.  Excellent wet etching technique using pulsed anodic oxidation for homoepitaxially grown GaN layer , 2018, Japanese Journal of Applied Physics.

[2]  K. Shiojima,et al.  Mapping etching induced damages on GaN surfaces using scanning internal photoemission microscopy , 2017 .

[3]  Tomoyoshi Mishima,et al.  Electrical characteristics of n-GaN Schottky contacts on cleaved surfaces of free-standing substrates: Metal work function dependence of Schottky barrier height , 2017 .

[4]  T. Hashizume,et al.  Precise thickness control in recess etching of AlGaN/GaN hetero-structure using photocarrier-regulated electrochemical process , 2017 .

[5]  Tamotsu Hashizume,et al.  Highly-stable and low-state-density Al2O3/GaN interfaces using epitaxial n-GaN layers grown on free-standing GaN substrates , 2016 .

[6]  Tamotsu Hashizume,et al.  Insulated gate and surface passivation structures for GaN-based power transistors , 2016 .

[7]  Masaaki Kuzuhara,et al.  AlGaN/GaN high-electron-mobility transistor technology for high-voltage and low-on-resistance operation , 2016 .

[8]  Daisuke Ueda,et al.  GaN transistors on Si for switching and high-frequency applications , 2014 .

[9]  T. Kachi.  Recent progress of GaN power devices for automotive applications , 2014 .

[10]  N. Biyikli,et al.  Hollow cathode plasma-assisted atomic layer deposition of crystalline AlN, GaN and AlxGa1-xN thin films at low temperatures , 2014 .

[11]  A. Wakahara,et al.  Plasma-Induced Damage and Recovery on Au/n-GaN Schottky Diode in Different Processes , 2012 .

[12]  T. Kimoto,et al.  Nearly Ideal Current–Voltage Characteristics of Schottky Barrier Diodes Formed on Hydride-Vapor-Phase-Epitaxy-Grown GaN Free-Standing Substrates , 2010 .

[13]  Tetsu Kachi,et al.  GaN-Based Trench Gate Metal Oxide Semiconductor Field-Effect Transistor Fabricated with Novel Wet Etching , 2008 .

[14]  T. Kachi,et al.  A Vertical Insulated Gate AlGaN/GaN Heterojunction Field-Effect Transistor , 2007 .

[15]  T. Hashizume,et al.  Formation of Thin Native Oxide Layer on n-GaN by Electrochemical Process in Mixed Solution with Glycol and Water , 2007 .

[16]  H. Hasegawa,et al.  Effects of nitrogen deficiency on electronic properties of AlGaN surfaces subjected to thermal and plasma processes , 2004 .

[17]  A. Bensaoula,et al.  The effects of nitrogen plasma on reactive-ion etching induced damage in GaN , 2004 .

[18]  Yutaka Ohno,et al.  A study on current collapse in AlGaN/GaN HEMTs induced by bias stress , 2003 .

[19]  K. Choi,et al.  Observation of inductively coupled-plasma-induced damage on n-type GaN using deep-level transient spectroscopy , 2003 .

[20]  J. Chyi,et al.  Reactive ion etching of GaN/InGaN using BCl3 plasma , 2003 .

[21]  T. Hashizume,et al.  Discrete surface state related to nitrogen-vacancy defect on plasma-treated GaN surfaces , 2002 .

[22]  F. E. Little,et al.  Comparison of the Electrochemical Impedance Spectroscopy Characteristics of Insertion Electrode Materials Used in Secondary Metal Hydride and Lithium-Ion Electrodes , 2001 .

[23]  R. J. Shul,et al.  Depth and thermal stability of dry etch damage in GaN Schottky diodes , 1999 .

[24]  C. Eddy,et al.  The influence of CH4/H2/Ar plasma etching on the conductivity of n‐type gallium nitride , 1995 .

[25]  R. Stratton,et al.  Field and thermionic-field emission in Schottky barriers , 1966 .

[26]  U. K. Mishra,et al.  CAVET on Bulk GaN Substrates Achieved With MBE-Regrown AlGaN/GaN Layers to Suppress Dispersion , 2012, IEEE Electron Device Letters.

[27]  K. Lau,et al.  Efficient wet etching of GaN and p-GaN assisted with chopped UV source , 2004 .