Modeling, control, and analysis of a robotic assist device

Abstract This paper presents a model-based approach to control design for an existing lower-limb robotic assist device, the portable powered ankle–foot orthosis (PPAFO). This approach seeks to address two key limitations of the PPAFO caused by the use of solenoid valves: slow system response and inefficient actuation during assistance. System limitations were addressed using a proportional valve coupled with a modified control approach. The two different system configurations were compared in simulation and on an experimental test fixture during motion and torque control tasks. Root mean square (RMS) trajectory tracking error was used to evaluate system performance, while system efficiency was assessed by measuring pneumatic fuel consumed during each task. The proportional valve system reduced RMS tracking error by as much as 91%, and increased efficiency by as much as 95% over the solenoid valve system.

[1]  이정호,et al.  Fundamentals of Fluid Mechanics, 6th Edition , 2009 .

[2]  Robert Ilg,et al.  An efficient robotic tendon for gait assistance. , 2006, Journal of biomechanical engineering.

[3]  Zen T. H. Koh.  Proceedings of the 1st international convention on Rehabilitation engineering & assistive technology: in conjunction with 1st Tan Tock Seng Hospital Neurorehabilitation Meeting , 2007 .

[4]  G. K. Rose,et al.  Orthotics : principles and practice , 1986 .

[5]  Ulf Holmberg,et al.  Ankle-Foot-Orthosis Control in Inclinations and Stairs , 2008, 2008 IEEE Conference on Robotics, Automation and Mechatronics.

[6]  Jianlong Zhang,et al.  Nonlinear Model-Based Control of Pulse Width Modulated Pneumatic Servo Systems , 2006 .

[7]  H. Herr,et al.  Adaptive control of a variable-impedance ankle-foot orthosis to assist drop-foot gait , 2004, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[8]  F. Zajac,et al.  Contributions of the individual ankle plantar flexors to support, forward progression and swing initiation during walking. , 2001, Journal of biomechanics.

[9]  Sumiko Yamamoto,et al.  Comparative Study of Mechanical Characteristics of Plastic AFOs , 1993 .

[10]  T.-J. Yeh,et al.  Control of McKibben pneumatic muscles for a power-assist, lower-limb orthosis , 2010 .

[11]  Xiangrong Shen,et al.  Nonlinear averaging applied to the control of pulse width modulated (PWM) pneumatic systems , 2004, Proceedings of the 2004 American Control Conference.

[12]  R. Waters,et al.  The energy expenditure of normal and pathologic gait. , 1999, Gait & posture.

[13]  Luquan Ren,et al.  A Phase-Dependent Hypothesis for Locomotor Functions of Human Foot Complex , 2008 .

[14]  Eric Loth,et al.  A portable powered ankle-foot orthosis for rehabilitation. , 2011, Journal of rehabilitation research and development.

[15]  Alfred D. Grant.  Gait Analysis: Normal and Pathological Function , 2010 .

[16]  B. Kotajarvi,et al.  The effect of custom-made braces for the ankle and hindfoot on ankle and foot kinematics and ground reaction forces. , 2006, Archives of physical medicine and rehabilitation.

[17]  Daniel Vélez Día,et al.  Biomechanics and Motor Control of Human Movement , 2013 .

[18]  Kenneth A. Shorter,et al.  Experimental evaluation of a portable powered ankle-foot orthosis , 2011, 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[19]  JungYoon Kim,et al.  Development of an active ankle-foot orthosis for hemiplegic patients , 2007, i-CREATe '07.

[20]  Yildirim Hurmuzlu,et al.  A High Performance Pneumatic Force Actuator System: Part I—Nonlinear Mathematical Model , 2000 .

[21]  M. Spong,et al.  Robot Modeling and Control , 2005 .

[22]  Thomas Sugar,et al.  Dynamically Controlled Ankle-Foot Orthosis (DCO) with Regenerative Kinetics: Incrementally Attaining User Portability , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[23]  A. Nakagawa,et al.  Development of Shear Type Compact MR Brake for the Intelligent Ankle-Foot Orthosis and Its Control; Research and Development in NEDO for Practical Application of Human Support Robot , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.