Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends

In Australia, the use of plastics has increased tremendously over the last few decades, but less than 20% of the waste plastics are recycled. The rest is usually landfilled, which poses major environmental problems. The solution to this problem involves the development of novel environmentally-benign technologies that would utilise these waste materials. This work investigates the reduction of EAF slags (47% FeO) by blends of metallurgical coke with High-Density Polyethylene (HDPE) plastics at 1550°C. The experiments were conducted in a laboratory-scale horizontal tube furnace, and were coupled with off-gas analysis using an infrared gas analyser and a multiple gas chromatographic analyser. The results indicate that the rate of FeO reduction in slags is significantly higher when the coke/plastics blends were used compared to pure coke, with the maximum rate of reduction (Blend 4) being over twice that of coke. Moreover, the CO2 content in the off-gas was observed to decrease (by ~75%) with increase in the polymer content of the blend. Additionally, the degree of carburisation and the removal of sulphur from the metal improved considerably when the coke was blended with plastics. The observed improvements in the rates of reduction, carburisation and desulphurisation are attributed to the reactions of hydrogen evolved from the waste plastics at these high temperatures.