Development of Goss texture in Al–0.3%Cu annealed after heavy rolling

[1]  R. Logé,et al.  Controlling grain structure and texture in Al-Mn from the competition between precipitation and recrystallization , 2017 .

[2]  P. Xia,et al.  Evolution of the Brass texture in an Al-Cu-Mg alloy during hot rolling , 2017 .

[3]  P. Xia,et al.  On the role of texture in governing fatigue crack propagation behavior of 2524 aluminum alloy , 2016 .

[4]  K. Marthinsen,et al.  The effect of heating rate on the softening behaviour of a deformed Al-Mn alloy with strong and weak concurrent precipitation , 2015 .

[5]  P. Xia,et al.  Mechanisms for Goss-grains induced crack deflection and enhanced fatigue crack propagation resistance in fatigue stage II of an AA2524 alloy , 2015 .

[6]  H. Suo,et al.  Comparative characterization of Cu–Ni substrates for coated conductors , 2014 .

[7]  O. Mishin,et al.  Evolution of microstructure, texture and topography during additional annealing of cube-textured Ni–5at.%W substrate for coated conductors , 2012 .

[8]  D. Juul Jensen,et al.  Evolution of Microstructure and Texture during Annealing of Aluminum AA1050 Cold Rolled to High and Ultrahigh Strains , 2010 .

[9]  Guilin Wu,et al.  Automatic determination of recrystallization parameters based on EBSD mapping , 2008 .

[10]  D. Juul Jensen,et al.  Microstructural-Based Measurement of Local Stored Energy Variations in Deformed Metals , 2007 .

[11]  Q. Liu,et al.  Stored energy, microstructure, and flow stress of deformed metals , 2005 .

[12]  F. J. Humphreys,et al.  The transition from discontinuous to continuous recrystallization in some aluminium alloys: II – annealing behaviour , 2004 .

[13]  T. Chauveau,et al.  A quantitative analysis of the evolution of texture and stored energy during annealing of cold rolled copper , 2003 .

[14]  O. Engler,et al.  Moderation of the recrystallization texture by nucleation at copper-type shear bands in Al-1Mg , 2002 .

[15]  R. Doherty,et al.  Cube recrystallization texture—experimental results and modeling , 1998 .

[16]  G. Gottstein,et al.  Grain boundary ensembles due to grain growth in copper with strong recrystallization texture , 1998 .

[17]  P. Yang,et al.  On the formation of recrystallization textures in binary Al-1.3% Mn investigated by means of local texture analysis , 1996 .

[18]  O. Daaland,et al.  Recrystallization texture development in commercial AlMnMg alloys , 1996 .

[19]  D. J. Jensen,et al.  Growth rates and misorientation relationships between growing nuclei/grains and the surrounding deformed matrix during recrystallization , 1995 .

[20]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[21]  O. Engler,et al.  Effects of particles on development of microstructure and texture during rolling and recrystallisation in fcc alloys , 1990 .

[22]  J. Hirsch,et al.  Texture development in Al 1.8wt% Cu depending on the precipitation state—I. Rolling textures , 1989 .

[23]  J. Hirsch,et al.  The application of quantitative texture analysis for investigating continuous and discontinuous recrystallization processes of Al-0.01 Fe , 1985 .

[24]  Gröger,et al.  Electrical resistivity of dislocations in aluminum. , 1985, Physical review. B, Condensed matter.

[25]  K. Lücke,et al.  The influence of iron content and annealing temperature on the recrystallization textures of high-purity aluminium-iron alloys , 1983 .

[26]  W. Hutchinson,et al.  Recrystallisation mechanisms and the origin of cube texture in copper , 1982 .