Ultra-hydrophobic aluminum foam development for potential application in continuous water-oil separation processes
暂无分享,去创建一个
[1] Kanshe Li,et al. Intelligent composite foam with reversible tunable superwettability for efficient and sustainable oil/water separation and high-concentration organic wastewater purification , 2021 .
[2] Xiaotao Zhu,et al. Superhydrophobic corn straw as a versatile platform for oil/water separation , 2021, Cellulose.
[3] Yuan Liu,et al. Fabrication, properties, and applications of open-cell aluminum foams: A review , 2021 .
[4] Huaiguo Xue,et al. Carbon nanofiber based superhydrophobic foam composite for high performance oil/water separation. , 2021, Journal of hazardous materials.
[5] M. Sillanpää,et al. Micro/nano-machines for spilled-oil cleanup and recovery: A review. , 2021, Chemosphere.
[6] D. S. Etkin,et al. Effectiveness of mechanical recovery for large offshore oil spills. , 2020, Marine pollution bulletin.
[7] Junfei Tian,et al. Superhydrophobic and superoleophilic cuttlebone with an inherent lamellar structure for continuous and effective oil spill cleanup , 2020 .
[8] X. Xing,et al. Fabrication of superhydrophobic coatings for corrosion protection by electrodeposition: A comprehensive review , 2020, Colloids and Surfaces A: Physicochemical and Engineering Aspects.
[9] Debabrata Barik,et al. Production methods of aluminium foam: A brief review , 2020 .
[10] Chul B. Park,et al. Novel separator skimmer for oil spill cleanup and oily wastewater treatment: From conceptual system design to the first pilot-scale prototype development , 2020 .
[11] Jingtao Wang,et al. Sponge-based materials for oil spill cleanups: A review , 2020, Frontiers of Chemical Science and Engineering.
[12] R. Sivakumar,et al. Boat type oil recovery skimmer , 2020 .
[13] I. Phiri,et al. Superhydrophobic and superoleophilic nickel foam for oil/water separation , 2019, Korean Journal of Chemical Engineering.
[14] Li Zhang,et al. Recyclable Oil-Absorption Foams via Secondary Phase Separation , 2018, ACS Sustainable Chemistry & Engineering.
[15] Yong Kang,et al. Superhydrophobic and superoleophilic modified EPDM foam rubber fabricated by a facile approach for oil/water separation , 2018, Applied Surface Science.
[16] Jintao Wang,et al. Flame-retardant superhydrophobic coating derived from fly ash on polymeric foam for efficient oil/corrosive water and emulsion separation. , 2018, Journal of colloid and interface science.
[17] Jenifer A. Buckley,et al. How clean is clean: a review of the social science of environmental cleanups , 2018, Environmental research letters : ERL [Web site].
[18] Yun-peng Zhu,et al. Preparation of emulsion‐templated fluorinated polymers and their application in oil/water separation , 2018 .
[19] Chao Yang,et al. Facile Two-Step Strategy for the Construction of a Mechanically Stable Three-Dimensional Superhydrophobic Structure for Continuous Oil-Water Separation. , 2018, ACS applied materials & interfaces.
[20] S. Azizian,et al. Fabrication of an Oil Spill Collector Package by Using Polyurethane Foam Wrapped with Superhydrophobic ZnO Microrods/Carbon Cloth. , 2018, ChemPlusChem.
[21] Tao Zhang,et al. Design and preparation of efficient, stable and superhydrophobic copper foam membrane for selective oil absorption and consecutive oil–water separation , 2018 .
[22] Weifeng Yuan,et al. Fabrication of a superhydrophobic polyurethane foam and its application for continuous oil removal , 2018 .
[23] Y. Nugroho,et al. Analysis of effectiveness of oil spill recovery using disc-type oil skimmer at laboratory scale , 2018 .
[24] Xiaotao Zhu,et al. A superhydrophobic copper mesh as an advanced platform for oil-water separation , 2018 .
[25] M. Rana,et al. Surface roughness induced superhydrophobicity of graphene foam for oil-water separation. , 2017, Journal of colloid and interface science.
[26] N. Bai,et al. Fabrication of robust 3D superhydrophobic material by a simple and low-cost method for oil-water separation and oil absorption , 2017 .
[27] Wei Zhou,et al. A facile method for the fabrication of a superhydrophobic polydopamine-coated copper foam for oil/water separation , 2017 .
[28] C. Peterson,et al. Response of nearshore ecosystems to the Deepwater Horizon oil spill , 2017 .
[29] T. Stegmaier,et al. Fabrication of bioinspired structured superhydrophobic and superoleophilic copper mesh for efficient oil-water separation , 2017 .
[30] Haitao Hu,et al. Experimental investigation on water drainage characteristics of open-cell metal foams with different wettabilities. , 2017 .
[31] M. Salavati‐Niasari,et al. Recyclable magnetic superhydrophobic straw soot sponge for highly efficient oil/water separation. , 2017, Journal of colloid and interface science.
[32] C. Liang,et al. Durability evaluation of superhydrophobic copper foams for long-term oil-water separation , 2017 .
[33] D. Nanda,et al. Fabrication of durable and regenerable superhydrophobic coatings with excellent self-cleaning and anti-fogging properties for aluminium surfaces , 2017 .
[34] D. Monson,et al. Timelines and mechanisms of wildlife population recovery following the Exxon Valdez Oil Spill , 2017 .
[35] Wei Zhang,et al. A smart switchable bioinspired copper foam responding to different pH droplets for reversible oil–water separation , 2017 .
[36] Xiaotao Zhu,et al. A waterproofing textile with robust superhydrophobicity in either air or oil surroundings , 2017 .
[37] Yi He,et al. Facile fabrication of a robust superwetting three-dimensional (3D) nickel foam for oil/water separation , 2017, Journal of Materials Science.
[38] Jiecai Han,et al. Synthesis of vertically aligned composite microcone membrane filter for water/oil separation , 2016 .
[39] Yudong Huang,et al. A robust bilayer nanofilm fabricated on copper foam for oil–water separation with improved performances , 2016 .
[40] Shuai Zhou,et al. Durable and modified foam for cleanup of oil contamination and separation of oil–water mixtures , 2016 .
[41] Z. Dai,et al. A three-dimensional porous metal foam with selective-wettability for oil–water separation , 2015, Journal of Materials Science.
[42] R. Prince. Oil spill dispersants: boon or bane? , 2015, Environmental science & technology.
[43] Yanji Zhu,et al. One-step fabrication of a nickel foam-based superhydrophobic and superoleophilic box for continuous oil–water separation , 2015, Journal of Materials Science.
[44] Hua Tang,et al. Versatile fabrication of the magnetic polymer-based graphene foam and applications for oil–water separation , 2015 .
[45] Yi Du,et al. Bio‐Inspired Multifunctional Metallic Foams Through the Fusion of Different Biological Solutions , 2014 .
[46] Qing Zhu,et al. Mussel-inspired direct immobilization of nanoparticles and application for oil-water separation. , 2014, ACS nano.
[47] Xin-quan Yu,et al. Porous copper surfaces with improved superhydrophobicity under oil and their application in oil separation and capture from water. , 2013, Chemical communications.
[48] N. Chen,et al. Versatile fabrication of ultralight magnetic foams and application for oil-water separation. , 2013, ACS nano.
[49] Lei Jiang,et al. Bioinspired Multifunctional Foam with Self‐Cleaning and Oil/Water Separation , 2013 .
[50] M. A. Navacerrada,et al. Thermal and acoustic properties of aluminium foams manufactured by the infiltration process , 2013 .
[51] S. Ahn,et al. Solar Cells: Hybrid Templated Synthesis of Crack-Free, Organized Mesoporous TiO2 Electrodes for High Efficiency Solid-State Dye-Sensitized Solar Cells (Adv. Funct. Mater. 1/2013) , 2013 .
[52] Chang‐Hwan Choi,et al. Cotton fabrics with single-faced superhydrophobicity. , 2012, Langmuir : the ACS journal of surfaces and colloids.
[53] Glen McHale,et al. An introduction to superhydrophobicity. , 2010, Advances in colloid and interface science.
[54] P. Fernández,et al. Procesos de fabricación de metales celulares. Parte I: Procesos por vía líquida , 2008 .
[55] J. Banhart. Manufacture, characterisation and application of cellular metals and metal foams , 2001 .