Multivariable optimisation of a new PCMs integrated hybrid renewable system with active cooling and hybrid ventilations

[1]  Genichi Taguchi,et al.  Taguchi's Quality Engineering Handbook , 2004 .

[2]  Ji Jie,et al.  Study of PV-trombe wall installed in a fenestrated room with heat storage , 2007 .

[3]  Yaolin Lin,et al.  Coupling of thermal mass and natural ventilation in buildings , 2008 .

[4]  Mehran Ameri,et al.  Experimental investigation and modeling of a direct-coupled PV/T air collector , 2010 .

[5]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[6]  Tin-Tai Chow,et al.  A Review on Photovoltaic/Thermal Hybrid Solar Technology , 2010, Renewable Energy.

[7]  Fu Xiao,et al.  Investigation on capacity matching in liquid desiccant and heat pump hybrid air-conditioning systems , 2012 .

[8]  Xiaoqin Sun,et al.  Energy and economic analysis of a building enclosure outfitted with a phase change material board (PCMB) , 2014 .

[9]  Vikas Verma,et al.  Optimization of solar assisted ground source heat pump system for space heating application by Taguchi method and utility concept , 2014 .

[10]  Hywel Rhys Thomas,et al.  Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept , 2014 .

[11]  Niccolò Aste,et al.  Water flat plate PV–thermal collectors: A review , 2014 .

[12]  Zhenjun Ma,et al.  Using Taguchi-Fibonacci search method to optimize phase change materials enhanced buildings with integrated solar photovoltaic thermal collectors , 2016 .

[13]  C. Yuan,et al.  Parametric study of ice thermal storage system with thin layer ring by Taguchi method , 2016 .

[14]  Xudong Zhao,et al.  Experimental investigation of the energy performance of a novel Micro-encapsulated Phase Change Material (MPCM) slurry based PV/T system , 2016 .

[15]  Pingfang Hu,et al.  Energy performance of double shape-stabilized phase change materials wallboards in office building , 2016 .

[16]  Fahad A. Al-Sulaiman,et al.  Development of a thermal model for a hybrid photovoltaic module and phase change materials storage integrated in buildings , 2016 .

[17]  Paul Cooper,et al.  Thermal performance investigation and optimization of buildings with integrated phase change materials and solar photovoltaic thermal collectors , 2016 .

[18]  Avadhesh Yadav,et al.  Thermal analysis on charging and discharging behaviour of a phase change material-based evacuated tube solar air collector , 2016 .

[19]  Raya Al-Dadah,et al.  Technical feasibility study of passive and active cooling for concentrator PV in harsh environment , 2016 .

[20]  Z. Zhai,et al.  Energy saving potential of a ventilation system with a latent heat thermal energy storage unit under different climatic conditions , 2016 .

[21]  Mehran Ameri,et al.  Investigating the performance of a water-based photovoltaic/thermal (PV/T) collector in laminar and turbulent flow regime , 2016 .

[22]  Guoqiang Zhang,et al.  Thermal performance and optimized thickness of active shape-stabilized PCM boards for side-wall cooling and under-floor heating system , 2016 .

[23]  Tin-Tai Chow,et al.  Performance evaluation and economic analysis of a full scale water-based photovoltaic/thermal (PV/T) system in an office building , 2016 .

[24]  Mohamed El-Amine Slimani,et al.  A detailed thermal-electrical model of three photovoltaic/thermal (PV/T) hybrid air collectors and photovoltaic (PV) module: Comparative study under Algiers climatic conditions , 2017 .

[25]  Zhang Tao,et al.  A comparative study on three types of solar utilization technologies for buildings: Photovoltaic, solar thermal and hybrid photovoltaic/thermal systems , 2017 .

[26]  Chi-Ming Lai,et al.  Thermal and electrical performance of a PV module integrated with double layers of water-saturated MEPCM , 2017 .

[27]  Guoqiang Zhang,et al.  Performance of buildings integrated with a photovoltaic–thermal collector and phase change materials , 2017 .

[28]  Yuting Jia,et al.  Comparative analyses on dynamic performances of photovoltaic–thermal solar collectors integrated with phase change materials , 2017 .

[29]  Xiaobo Yin,et al.  Energy saving and economic analysis of a new hybrid radiative cooling system for single-family houses in the USA , 2018, Applied Energy.

[30]  A. Hantsch.  Numerical study of flow-through wall elements with phase–change materials , 2018, Journal of Building Engineering.

[31]  Chong Shen,et al.  Energy efficiency of an air conditioning system coupled with a pipe-embedded wall and mechanical ventilation , 2018 .

[32]  Zhen-hua Liu,et al.  Study on heat transfer and cold storage characteristics of a falling film type of cold energy regenerator with PCM , 2018, Applied Thermal Engineering.

[33]  Guoqiang Zhang,et al.  Study on heat-transfer mechanism of wallboards containing active phase change material and parameter optimization with ventilation , 2018, Applied Thermal Engineering.

[34]  Yuekuan Zhou,et al.  The year-round thermal performance of a new ventilated Trombe wall integrated with phase change materials in the hot summer and cold winter region of China , 2018, Indoor and Built Environment.

[35]  Eunkyu Lee,et al.  A simplified approach to predict temperature distributions in a mechanically ventilated atrium using a thermal response factor method , 2018, Indoor and Built Environment.

[36]  Norhayati Mahyuddin,et al.  Concrete as a thermal mass material for building applications - A review , 2018, Journal of Building Engineering.

[37]  Mohit Jain,et al.  Modelling and experimental study of latent heat thermal energy storage with encapsulated PCMs for solar thermal applications , 2018, Applied Thermal Engineering.

[38]  H. Sammouda,et al.  Numerical study of an inclined photovoltaic system coupled with phase change material under various operating conditions , 2018, Applied Thermal Engineering.

[39]  Guoqiang Zhang,et al.  Numerical study on cooling performance of a ventilated Trombe wall with phase change materials , 2018, Building Simulation.

[40]  Zhengguo Zhang,et al.  Two types of composite phase change panels containing a ternary hydrated salt mixture for use in building envelope and ventilation system , 2018, Energy Conversion and Management.

[41]  Javier Martínez-Gómez,et al.  Analysis of phase change materials (PCM) for building wallboards based on the effect of environment , 2019, Journal of Building Engineering.

[42]  J. Meyer,et al.  Experimental analysis for thermal storage performance of three types of plate encapsulated phase change materials in air heat exchangers for ventilation applications , 2019, Journal of Building Engineering.

[43]  K. A. Antonopoulos,et al.  Numerical simulation of a solar cooling system with and without phase change materials in radiant walls of a building , 2019, Energy Conversion and Management.

[44]  Xiaodong Liu,et al.  Optimal configurations of high-rise buildings to maximize solar energy generation efficiency of building-integrated photovoltaic systems , 2019, Indoor and Built Environment.

[45]  Mario A. Medina,et al.  Experimental investigations on the thermal behavior of phase change material (PCM) in ventilated slabs , 2019, Applied Thermal Engineering.

[46]  Xiao-yan Zhang,et al.  Experimental and numerical investigations of heat transfer and phase change characteristics of cemented paste backfill with PCM , 2019, Applied Thermal Engineering.

[47]  Zhixun Wang,et al.  A remote integrated energy system based on cogeneration of a concentrating solar power plant and buildings with phase change materials , 2019, Energy Conversion and Management.

[48]  Guoqiang Zhang,et al.  Study on the energy performance enhancement of a new PCMs integrated hybrid system with the active cooling and hybrid ventilations , 2019, Energy.

[49]  A. Alrobaian,et al.  Performance of PV panel coupled with geothermal air cooling system subjected to hot climatic , 2019, Applied Thermal Engineering.