Magnetic force enhancement in a linear actuator by air-gap magnetic field distribution optimization and design

The focus of this paper is to show that the magnetic force generated by a linear actuator may be enhanced through the optimization and design of the devices air-gap magnetic field distribution. Specifically, the use of a periodic ladder structure is proposed for magnetic field manipulation, and a simplified finite element analysis is adopted in lieu of a higher cost computational model. The optimal magnetic field distribution that maximizes the actuator force is then found via structural topology optimization. This force enhancement is explained using a Maxwell stress tensor analysis and validated through experimental studies. Finally, a periodic-ladder structure is designed for an equivalent optimal magnetic field distribution, and the linear actuator force enhancement is confirmed.

[1]  Noboru Kikuchi,et al.  Structural Topology Optimization of Electrical Machinery to Maximize Stiffness With Body Force Distribution , 2010, IEEE Transactions on Magnetics.

[2]  R. Krishnan,et al.  Permanent Magnet Synchronous and Brushless DC Motor Drives , 2009 .

[3]  Jae Seok Choi,et al.  Simultaneous structural topology optimization of electromagnetic sources and ferromagnetic materials , 2009 .

[4]  S. Min,et al.  Design of Magnetic Actuator With Nonlinear Ferromagnetic Materials Using Level-Set Based Topology Optimization , 2010, IEEE Transactions on Magnetics.

[5]  G. Lerosey,et al.  Focusing Beyond the Diffraction Limit with Far-Field Time Reversal , 2007, Science.

[6]  Dino Zorbas.  Electric Machines: Principles, Applications, and Control Schematics , 1989 .

[7]  Ercan M. Dede,et al.  Kilohertz magnetic field focusing in a pair of metallic periodic-ladder structures , 2011 .

[8]  Motoya Ito,et al.  Evaluation of force calculating methods , 1990 .

[9]  Kuan-Ren Chen,et al.  Focusing of light beyond the diffraction limit of half the wavelength. , 2010, Optics letters.

[10]  Yan Wang,et al.  Spatially shifted beam approach to subwavelength focusing. , 2008, Physical review letters.

[11]  Duane C. Hanselman,et al.  Brushless Permanent-Magnet Motor Design , 1994 .

[12]  Anthony Grbic,et al.  Near-Field Plates: Subdiffraction Focusing with Patterned Surfaces , 2008, Science.

[13]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[14]  L. Lim,et al.  Plasmonic microzone plate: Superfocusing at visible regime , 2007 .

[15]  Jae Seok Choi,et al.  Optimal Design of an Electromagnetic Coupler to Maximize Force to a Specific Direction , 2008, IEEE Transactions on Magnetics.

[16]  W. Wu,et al.  Design optimization of a switched reluctance motor by electromagnetic and thermal finite-element analysis , 2003 .

[17]  Jae Seok Choi,et al.  Structural optimization of ferromagnetic materials based on the magnetic reluctivity for magnetic field problems , 2008 .

[18]  Sang-In Park,et al.  Magnetic Actuator Design for Maximizing Force Using Level Set Based Topology Optimization , 2009, IEEE Transactions on Magnetics.

[19]  R. Merlin,et al.  Radiationless Electromagnetic Interference: Evanescent-Field Lenses and Perfect Focusing , 2007, Science.

[20]  Zongfu Yu,et al.  Deep-Subwavelength Focusing and Steering of Light in an Aperiodic Metallic Waveguide Array , 2009 .