Micromachined pressure sensors: review and recent developments

Since the discovery of piezoresistivity in silicon in the mid 1950s, silicon-based pressure sensors have been widely produced. Micromachining technology has greatly benefited from the success of the integrated circuit industry, borrowing materials, processes, and toolsets. Because of this, microelectromechanical systems (MEMS) are now poised to capture large segments of existing sensor markets and to catalyse the development of new markets. Given the emerging importance of MEMS, it is instructive to review the history of micromachined pressure sensors, and to examine new developments in the field. Pressure sensors will be the focus of this paper, starting from metal diaphragm sensors with bonded silicon strain gauges, and moving to present developments of surface-micromachined, optical, resonant, and smart pressure sensors. Considerations for diaphragm design will be discussed in detail, as well as additional considerations for capacitive and piezoresistive devices. Results from surface-micromachined pressure sensors developed by the authors will be presented. Finally, advantages of micromachined sensors will be discussed.

[1]  E. Bassous.  Fabrication of novel three-dimensional microstructures by the anisotropic etching of , 1978, IEEE Transactions on Electron Devices.

[2]  J. Bergqvist,et al.  Capacitive microphone with a surface micromachined backplate using electroplating technology , 1994 .

[3]  K. Wise,et al.  SENSIM: A simulation program for solid-state pressure sensors , 1982, IEEE Transactions on Electron Devices.

[4]  F. Parodi,et al.  A silicon condenser microphone with a highly perforated backplate , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[5]  H. Bartelt,et al.  Design and investigation of micromechanical bridge structures for an optical pressure sensor with temperature compensation , 1993 .

[6]  Henry Guckel,et al.  Surface micromachined pressure transducers , 1991 .

[7]  Charles S. Smith.  Piezoresistance Effect in Germanium and Silicon , 1954 .

[8]  K. Wise,et al.  An IC piezoresistive pressure sensor for biomedical instrumentation. , 1973, IEEE transactions on bio-medical engineering.

[9]  R. Schellin,et al.  Low pressure acoustic sensors for airborne sound with piezoresistive monocrystalline silicon and electrochemically etched diaphragms , 1995 .

[10]  Wouter Olthuis,et al.  Improvement of the performance of microphones with a silicon nitride diaphragm and backplate , 1994 .

[11]  Ching-Liang Dai,et al.  A CMOS surface micromachined pressure sensor , 1999 .

[12]  K. Wise,et al.  Performance of nonplanar silicon diaphragms under large deflections , 1994 .

[13]  Victor A. Gridchin,et al.  Piezoresistive properties of polysilicon films , 1995 .

[14]  Willy Sansen,et al.  Compensation structures for convex corner micromachining in silicon , 1990 .

[15]  O. Tabata,et al.  Surface micromachined micro-diaphragm pressure sensors , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[16]  H. L. Offereins,et al.  Methods for the fabrication of convex corners in anisotropic etching of (100) silicon in aqueous KOH , 1990 .

[17]  A. Górecka-Drzazga,et al.  Silicon optical pressure sensor , 1992 .

[18]  J. Bernstein.  A micromachined condenser hydrophone , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[19]  Lennart Löfdahl,et al.  Small piezoresistive silicon microphones specially designed for the characterization of turbulent gas flows , 1994 .

[20]  Jaume Esteve,et al.  Etching front control of strips for corner compensation , 1993 .

[21]  H. Nathanson,et al.  A microminiature solid-state capacitive blood pressure transducer with improved sensitivity. , 1973, IEEE transactions on bio-medical engineering.

[22]  Hideo Yoshihara,et al.  Silicon Nitride Single-Layer X-Ray Mask , 1981 .

[23]  K.E. Petersen,et al.  Silicon as a mechanical material , 1982, Proceedings of the IEEE.

[24]  G. Wallis,et al.  Field Assisted Glass‐Metal Sealing , 1969 .

[25]  Janusz Bryzek,et al.  Impact of MEMS technology on society , 1996 .

[26]  K.D. Wise,et al.  Scaling limits in batch-fabricated silicon pressure sensors , 1987, IEEE Transactions on Electron Devices.

[27]  Werner Brockherde,et al.  Smart CMOS capacitive pressure transducer with on-chip calibration capability , 1992 .

[28]  James H. Smith,et al.  CMOS-compatible surface-micromachined pressure sensor for aqueous ultrasonic application , 1995, Smart Structures.

[29]  J. Brian Fowlkes,et al.  Crosstalk study of an integrated ultrasound transducer array, with a micromachined diaphragm structure , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[30]  D. W. Burns,et al.  Fabrication techniques for integrated sensor microstructures , 1986, 1986 International Electron Devices Meeting.

[31]  D. W. Burns,et al.  Characteristics of polysilicon resonant microbeams , 1992 .

[32]  D. Wagner,et al.  Optical pressure sensor using two Mach-Zehnder interferometers for the TE and TM polarization , 1994 .

[33]  W. Brockherde,et al.  CMOS integrated capacitive pressure transducer with on-chip electronics and digital calibration capability , 1991, TRANSDUCERS '91: 1991 International Conference on Solid-State Sensors and Actuators. Digest of Technical Papers.

[34]  Nils Kroemer,et al.  Ultrasonic transducers and transducer arrays for applications in air , 1992 .

[35]  Ken-ya Hashimoto,et al.  Miniaturised ultrasonic-wave velocity and attenuation sensors for liquid , 1992, IEEE 1992 Ultrasonics Symposium Proceedings.

[36]  S. D. Collins,et al.  A micromachined pressure sensor with fiber-optic interferometric readout , 1994 .

[37]  S. Walsh,et al.  Commercializing MEMS--too fast or too slow? , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[38]  Richard S. Muller,et al.  Piezoelectric microphone with on-chip CMOS circuits , 1993 .

[39]  A. R. Zias,et al.  Solid-state digital pressure transducer , 1969 .

[40]  Stephen D. Senturia,et al.  Microsensor packaging and system partitioning , 1988 .

[41]  T. Christenson,et al.  Fabrication of micromechanical devices from polysilicon films with smooth surfaces , 1989 .

[42]  J. Gardner,et al.  A Laterally Driven Micromachined Resonant Pressure Sensor , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[43]  Richard S. Muller,et al.  Front-to-backside alignment using resist-patterned etch control and one etching step , 1992 .

[44]  P. French,et al.  Piezoresistance in polysilicon and its applications to strain gauges , 1989 .

[45]  H. Sandmaier,et al.  Fabrication of Non‐Underetched Convex Corners in Anisotropic Etching of (100)‐Silicon in Aqueous KOH with Respect to Novel Micromechanic Elements , 1990 .

[46]  David W. Burns,et al.  Sealed-cavity resonant microbeam pressure sensor , 1995 .

[47]  James H. Smith,et al.  Characterization of a surface micromachined pressure sensor array , 1995, MOEMS-MEMS.

[48]  K. Bean,et al.  Anisotropic etching of silicon , 1978, IEEE Transactions on Electron Devices.

[49]  D. L. Kendall.  On etching very narrow grooves in silicon , 1975 .

[50]  W. Ko,et al.  Development of a miniature pressure transducer for biomedical applications , 1979, IEEE Transactions on Electron Devices.

[51]  Witold Trzeciakowski,et al.  New results on optical pressure sensors based on semiconductor quantum wells , 1994 .

[52]  K. Wise,et al.  Pressure sensitivity in anisotropically etched thin-diaphragm pressure sensors , 1979, IEEE Transactions on Electron Devices.