A review on in situ monitoring technology for directed energy deposition of metals
暂无分享,去创建一个
Wang Yiwen | Zhao Zhang | Hong-Chao Zhang | Weiwei Liu | Zijue Tang | Shitong Peng | Kaze Mojtaba Saleheen | Zhi-chao Liu | Zhichao Liu | Zhaodong Zhang | Zi-jue Tang | Wei-Wei Liu | Hong-chao Zhang | Shitong Peng | Yi-wen Wang
[1] J. L. Mato,et al. Industrial Laser Cladding Systems: FPGA-Based Adaptive Control , 2012, IEEE Industrial Electronics Magazine.
[2] Hong-Chao Zhang,et al. A Review on In-situ Monitoring and Adaptive Control Technology for Laser Cladding Remanufacturing , 2017 .
[3] Qiang Zhan,et al. A wire deflection detection method based on image processing in wire + arc additive manufacturing , 2017 .
[4] Hugo Thienpont,et al. Spectroscopic monitoring and melt pool temperature estimation during the laser metal deposition process , 2016 .
[5] Olaf Diegel,et al. Wohlers Report 2018: 3D printing and additive manufacturing state of the industry: Annual Worldwide Progress Report , 2017 .
[6] Wang Kehong,et al. Gas flow status analysis in CMT+P additive manufacturing based on texture features of molten pool images , 2019, Optik.
[7] M. Miyagi,et al. Adaptive shape control of laser-deposited metal structures by adjusting weld pool size , 2014 .
[8] Lianfa Bai,et al. Quality monitoring in wire-arc additive manufacturing based on cooperative awareness of spectrum and vision , 2019, Optik.
[9] R. Landers,et al. Melt Pool Temperature Control for Laser Metal Deposition Processes—Part II: Layer-to-Layer Temperature Control , 2010 .
[10] Patrick Guillaume,et al. Model-Based Temperature Feedback Control of Laser Cladding Using High-Resolution Hyperspectral Imaging , 2017, IEEE/ASME Transactions on Mechatronics.
[11] Wei Ya,et al. 2D modelling of clad geometry and resulting thermal cycles during laser cladding , 2016 .
[12] Tao Sun,et al. High-speed X-ray investigation of melt dynamics during continuous-wave laser remelting of selective laser melted Co-Cr alloy , 2019, CIRP Annals.
[13] Radovan Kovacevic,et al. Laser cladding assisted with an induction heater (LCAIH) of Ni–60%WC coating , 2015 .
[14] Tao Li,et al. Effects of deposition variables on molten pool temperature during laser engineered net shaping of Inconel 718 superalloy , 2019, The International Journal of Advanced Manufacturing Technology.
[15] Reinhart Poprawe,et al. Development and qualification of a novel laser-cladding head with integrated sensors , 2007 .
[16] Patrick Guillaume,et al. High Resolution Temperature Measurement of Liquid Stainless Steel Using Hyperspectral Imaging , 2017, Sensors.
[17] Haiying Xu,et al. Distortion control in a wire-fed electron-beam thin-walled Ti-6Al-4V freeform , 2018 .
[18] Seung Ki Moon,et al. Process monitoring and inspection systems in metal additive manufacturing: Status and applications , 2017 .
[19] Frank W. Liou,et al. Vision-based Process Monitoring for Laser Metal Deposition Processes , 2013 .
[20] Lin Wu,et al. Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis , 2012, Journal of Intelligent Manufacturing.
[21] Lars-Erik Svensson,et al. Evaluation of a temperature measurement method developed for laser metal deposition , 2017 .
[22] L. Tang,et al. Melt Pool Temperature Control for Laser Metal Deposition Processes—Part I: Online Temperature Control , 2010 .
[23] Manyalibo J. Matthews,et al. In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry , 2018, Materials & Design.
[24] K. Mukherjee,et al. Measurement of temperature distributions during laser cladding process , 2000 .
[25] Shian Gao,et al. Revealing internal flow behaviour in arc welding and additive manufacturing of metals , 2018, Nature Communications.
[26] Michael F Toney,et al. Dynamics of pore formation during laser powder bed fusion additive manufacturing , 2019, Nature Communications.
[27] Chenglei Diao,et al. Oxide accumulation effects on wire + arc layer-by-layer additive manufacture process , 2018 .
[28] N. Shamsaei,et al. An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control , 2015 .
[29] Ehsan Toyserkani,et al. An image-based feature tracking algorithm for real-time measurement of clad height , 2007, Machine Vision and Applications.
[30] Wei Fu,et al. Measurement of the Molten Pool Image during Laser Cladding Process , 2014 .
[31] Radovan Kovacevic,et al. A thermo-mechanical model for simulating the temperature and stress distribution during laser cladding process , 2019, The International Journal of Advanced Manufacturing Technology.
[32] Remy Fabbro,et al. Temperature measurement of laser heated metals in highly oxidizing environment using 2D single-band and spectral pyrometry , 2012 .
[33] Qinglin Han,et al. Forming characteristics of additive manufacturing process by twin electrode gas tungsten arc , 2019, The International Journal of Advanced Manufacturing Technology.
[34] Reinhart Poprawe,et al. Identification and qualification of temperature signal for monitoring and control in laser cladding , 2006 .
[35] K. Bartkowiak,et al. Direct laser deposition process within spectrographic analysis in situ , 2010 .
[36] Chee How Wong,et al. Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring , 2018 .
[37] V N Lednev,et al. Laser induced breakdown spectroscopy for in-situ multielemental analysis during additive manufacturing process , 2018, Journal of Physics: Conference Series.
[38] Kamel Fezzaa,et al. Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction , 2017, Scientific Reports.
[39] Zengxi Pan,et al. Wire-feed additive manufacturing of metal components: technologies, developments and future interests , 2015 .
[40] M. L. Griffith,et al. Understanding thermal behavior in the LENS process , 1999 .
[41] Patrick Guillaume,et al. Hyperspectral and thermal temperature estimation during laser cladding , 2019, Journal of Laser Applications.
[42] Richard E. Martin,et al. Thermal imaging for assessment of electron-beam freeform fabrication (EBF3) additive manufacturing deposits , 2013, Defense, Security, and Sensing.
[43] Amir Khajepour,et al. System identification and height control of laser cladding using adaptive neuro-fuzzy inference systems , 2013 .
[44] Aitzol Lamikiz,et al. In-process height control during laser metal deposition based on structured light 3D scanning , 2018 .
[45] Jun Xiong,et al. Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing , 2016 .
[46] M. Doubenskaia,et al. Optical monitoring of Nd : YAG laser cladding , 2004 .
[47] Amir Khajepour,et al. Clad height control in laser cladding using a nonlinear optimal output tracking controller , 2013 .
[48] Justin Whiting,et al. Real-time acoustic emission monitoring of powder mass flow rate for directed energy deposition. , 2018, Additive manufacturing.
[49] C. Doumanidis,et al. Geometry Regulation of Material Deposition in Near-Net Shape Manufacturing by Thermally Scanned Welding , 2002 .
[50] Patrick Guillaume,et al. High Resolution Temperature Estimation During Laser Cladding of Stainless Steel , 2016 .
[51] Amir Khajepour,et al. Control of the Clad Height in Laser Powder Deposition Process Using a PID Controller , 2006 .
[52] Mohammad H. Farshidianfar,et al. Rapid prediction of real-time thermal characteristics, solidification parameters and microstructure in laser directed energy deposition (powder-fed additive manufacturing) , 2019, Journal of Materials Processing Technology.
[53] Guangjun Zhang,et al. Forecasting process parameters for GMAW-based rapid manufacturing using closed-loop iteration based on neural network , 2013, The International Journal of Advanced Manufacturing Technology.
[54] Ashish Kumar Nath,et al. Monitoring of Molten Pool Thermal History and its Significance in Laser Cladding Process , 2017 .
[55] Tao Sun,et al. In situ synchrotron X-ray imaging of 4140 steel laser powder bed fusion , 2019, Materialia.
[56] Masanobu Nakamura,et al. Control of the chemical composition distribution in deposited metal by wire and arc-based additive manufacturing , 2019, Precision Engineering.
[57] Richard Leach,et al. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing , 2016 .
[58] Bengt Lennartson,et al. Height control of laser metal-wire deposition based on iterative learning control and 3D scanning , 2012 .
[59] Sergey N. Grigoriev,et al. Optical Monitoring in Elaboration of Metal Matrix Composites by Direct Metal Deposition , 2012 .
[60] Yaoyu Ding,et al. Development of sensing and control system for robotized laser-based direct metal addition system , 2016 .
[61] David L. Bourell,et al. Introduction to Additive Manufacturing , 2020, Additive Manufacturing Processes.
[62] M. Doubenskaia,et al. Comprehensive analysis of laser cladding by means of optical diagnostics and numerical simulation , 2013 .
[63] Kamel Fezzaa,et al. Ultrafast X-ray imaging of laser–metal additive manufacturing processes , 2018, Journal of synchrotron radiation.
[64] Eric J. Faierson,et al. In-situ acoustic signature monitoring in additive manufacturing processes , 2018 .
[65] Hui Wang,et al. Overhang structure and accuracy in laser engineered net shaping of Fe-Cr steel , 2018, Optics & Laser Technology.
[66] Michael Towrie,et al. In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing , 2018, Nature Communications.
[67] Matt Clark,et al. Spatially resolved acoustic spectroscopy for texture imaging in powder bed fusion nickel superalloys , 2019 .
[68] G. Tapia,et al. A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing , 2014 .
[69] Fujun Wang,et al. Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis , 2008 .
[70] Radovan Kovacevic,et al. Numerical Simulation and Experimental Study of Powder Flow Distribution in High Power Direct Diode Laser Cladding Process , 2015 .
[71] Ashish Kumar Nath,et al. Monitoring and assessment of tungsten carbide wettability in laser cladded metal matrix composite coating using an IR pyrometer , 2017 .
[72] Yu-Lung Lo,et al. Vision-based inspection system for cladding height measurement in Direct Energy Deposition (DED) , 2019, Additive Manufacturing.
[73] Bintao Wu,et al. Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4V alloy deposited by wire arc additive manufacturing , 2018, Additive Manufacturing.
[74] C. Doumanidis,et al. Geometry Modeling and Control by Infrared and Laser Sensing in Thermal Manufacturing with Material Deposition , 2001 .
[75] Frank W. Liou,et al. Defects monitoring of laser metal deposition using acoustic emission sensor , 2017 .
[76] Bianca Maria Colosimo,et al. Data fusion methods for statistical process monitoring and quality characterization in metal additive manufacturing , 2018 .
[77] Jun Xiong,et al. Increasing stability in robotic GTA-based additive manufacturing through optical measurement and feedback control , 2019, Robotics Comput. Integr. Manuf..
[78] Xi Chen Yang,et al. Study on Measurement of Melting Process of Molten Pool Formed by Laser Scanning Mirror , 2008 .
[79] Ashish Kumar Nath,et al. In-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coating , 2018 .
[80] Alireza Fathi,et al. Clad height control in laser solid freeform fabrication using a feedforward PID controller , 2007 .
[81] Remy Fabbro,et al. Influence of a pulsed laser regime on surface finish induced by the direct metal deposition process on a Ti64 alloy , 2014 .
[82] Yan Wang,et al. In situ monitoring of FDM machine condition via acoustic emission , 2015 .
[83] S. Gold,et al. In-process sensing in selective laser melting (SLM) additive manufacturing , 2016, Integrating Materials and Manufacturing Innovation.
[84] Lijun Song,et al. Control of melt pool temperature and deposition height during direct metal deposition process , 2012 .
[85] Weidong Huang,et al. Estimation of laser solid forming process based on temperature measurement , 2010 .
[86] Noboru Kikuchi,et al. Closed loop direct metal deposition : art to part , 2000 .
[87] Bengt Lennartson,et al. Resistance based iterative learning control of additive manufacturing with wire , 2015 .
[88] I. Tabernero,et al. A feedforward controller for tuning laser cladding melt pool geometry in real time , 2017 .
[89] Hossein Taheri,et al. NDE in-process for metal parts fabricated using powder based additive manufacturing , 2019, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[90] S. Shevchik,et al. Acoustic emission for in situ quality monitoring in additive manufacturing using spectral convolutional neural networks , 2017 .
[91] Radovan Kovacevic,et al. Sensing, modeling and control for laser-based additive manufacturing , 2003 .
[92] Kamel Fezzaa,et al. Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging , 2018, Acta Materialia.
[93] Carolin Körner,et al. Layerwise monitoring of electron beam melting via backscatter electron detection , 2018, Rapid Prototyping Journal.
[94] Manyalibo J. Matthews,et al. Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging , 2019, Materials Today Advances.
[95] Hiroyuki Sasahara,et al. Layer geometry control for the fabrication of lattice structures by wire and arc additive manufacturing , 2019, Additive Manufacturing.
[96] Xin Lin,et al. In-situ observation and numerical simulation on the transient strain and distortion prediction during additive manufacturing , 2019, Journal of Manufacturing Processes.
[97] Hui Chen,et al. Fabrication of inclined thin-walled parts in multi-layer single-pass GMAW-based additive manufacturing with flat position deposition , 2017 .
[98] B. Colosimo,et al. Process defects and in situ monitoring methods in metal powder bed fusion: a review , 2017 .
[99] F. Liou,et al. Stereo vision based hybrid manufacturing process for precision metal parts , 2015 .
[100] Kamel Fezzaa,et al. Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging , 2019, Science.
[101] Lijun Song,et al. Real Time Cr Measurement Using Optical Emission Spectroscopy During Direct Metal Deposition Process , 2012, IEEE Sensors Journal.
[102] Jun Xiong,et al. Vision-sensing and bead width control of a single-bead multi-layer part: material and energy savings in GMAW-based rapid manufacturing , 2013 .
[103] Gang Wang,et al. A comparative study of GMAW- and DE-GMAW-based additive manufacturing techniques: thermal behavior of the deposition process for thin-walled parts , 2017 .
[104] Claus Emmelmann,et al. Influences of process conditions on stability of sensor controlled robot-based laser metal deposition , 2018 .
[105] Nikolai Kashaev,et al. Thermal analysis of wire-based direct energy deposition of Al-Mg using different laser irradiances , 2019, Additive Manufacturing.
[106] Jun Xiong,et al. Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision , 2013 .
[107] Guangjun Zhang,et al. Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing , 2015 .
[108] Timothy H. Boyer. Thermodynamics of the harmonic oscillator: Wien’s displacement law and the Planck spectrum , 2002 .
[109] Frank W. Liou,et al. Stereo vision-based repair of metallic components , 2017 .
[110] Konrad Wegener,et al. Analysis of melt pool dynamics in laser cladding and direct metal deposition by automated high-speed camera image evaluation , 2018 .
[111] L. Bond,et al. In Situ Additive Manufacturing Process Monitoring With an Acoustic Technique: Clustering Performance Evaluation Using K-Means Algorithm , 2019, Journal of Manufacturing Science and Engineering.
[112] Ali Gökhan Demir,et al. High-speed imaging and process characterization of coaxial laser metal wire deposition , 2018, Additive Manufacturing.
[113] Seung Ki Moon,et al. A Cost-Driven Design Methodology for Additive Manufactured Variable Platforms in Product Families , 2016 .
[114] Paul A. Colegrove,et al. Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement , 2018 .
[115] Jun Xiong,et al. Finite element analysis and experimental validation of thermal behavior for thin-walled parts in GMAW-based additive manufacturing with various substrate preheating temperatures , 2017 .
[116] Bengt Lennartson,et al. Control Design for Automation of Robotized Laser Metal-wire Deposition , 2008 .
[117] Pan Michaleris,et al. Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys , 2015 .
[118] Deyong You,et al. WPD-PCA-Based Laser Welding Process Monitoring and Defects Diagnosis by Using FNN and SVM , 2015, IEEE Transactions on Industrial Electronics.
[119] R. Poprawe,et al. Characterization of the process control for the direct laser metallic powder deposition , 2006 .
[120] Patrice Peyre,et al. Simplified numerical model for the laser metal deposition additive manufacturing process , 2017 .
[121] Patrick Guillaume,et al. Hardware-in-the-loop control of additive manufacturing processes using temperature feedback , 2016 .
[122] Chuansong Wu,et al. Investigating the generation process of molten droplets and arc plasma in the confined space during compulsively constricted WAAM , 2020 .
[123] Andres Gasser,et al. Study on influential factors for process monitoring and control in laser aided additive manufacturing , 2013 .
[124] Tao Sun,et al. In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing , 2019, Scientific Reports.
[125] O. Company,et al. Skeleton arc additive manufacturing with closed loop control , 2019, Additive Manufacturing.
[126] Kornel Ehmann,et al. Thermal effect on clad dimension for laser deposited Inconel 718 , 2017 .
[127] Jun Xiong,et al. Molten pool stability of thin-wall parts in robotic GMA-based additive manufacturing with various position depositions , 2019, Robotics and Computer-Integrated Manufacturing.
[128] Wei Li,et al. A two-dimensional simulation of grain structure growth within the substrate and the fusion zone during direct metal deposition , 2018, Comptes Rendus Mécanique.
[129] Remy Fabbro,et al. Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti-6Al-4V alloy , 2013 .
[130] Shaw C. Feng,et al. A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes , 2017, Int. J. Prod. Res..
[131] Penghui Zhao,et al. Development of powder distribution model of discontinuous coaxial powder stream in laser direct metal deposition , 2018, Powder Technology.
[132] Lijun Song,et al. Feedback Control of Melt Pool Temperature During Laser Cladding Process , 2011, IEEE Transactions on Control Systems Technology.
[133] Ashish Kumar Nath,et al. Online monitoring of thermo-cycles and its correlation with microstructure in laser cladding of nickel based super alloy , 2017 .
[134] L. Tang,et al. Layer-to-Layer Height Control for Laser Metal Deposition Process , 2011 .
[135] Frank W. Liou,et al. Vision-based defect detection in laser metal deposition process , 2014 .
[136] Per Nylén,et al. Microstructure modelling of laser metal powder directed energy deposition of alloy 718 , 2019, Additive Manufacturing.
[137] Amir Khajepour,et al. A mechatronics approach to laser powder deposition process , 2006 .
[138] M. Doubenskaia,et al. Optical Diagnostics of Deposition of Metal Matrix Composites by Laser Cladding , 2011 .
[139] Reinhart Poprawe,et al. Investigation on the direct laser metallic powder deposition process via temperature measurement , 2006 .
[140] Xin Lin,et al. The full-field strain distribution and the evolution behavior during additive manufacturing through in-situ observation , 2018, Materials & Design.
[141] Michael Rethmeier,et al. Assessing the predictive capability of numerical additive manufacturing simulations via in-situ distortion measurements on a LMD component during build-up , 2018 .
[142] Nobuyuki Abe,et al. Dynamic observation of formation process in laser cladding using high speed video camera , 2013 .
[143] Yvonne Durandet,et al. Melt pool temperature and its effect on clad formation in pulsed Nd:yttrium-aluminum-garnet laser cladding of Stellite 6 , 2007 .
[144] Vimal Dhokia,et al. Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts , 2018, Int. J. Comput. Integr. Manuf..
[145] Radovan Kovacevic,et al. An investigation on mechanical and microstructural properties of 316LSi parts fabricated by a robotized laser/wire direct metal deposition system , 2018, Additive Manufacturing.
[146] Ronald G.K.M. Aarts,et al. Spectroscopic monitoring of metallic bonding in laser metal deposition , 2015 .
[147] Xu Han,et al. Real-Time Composition Monitoring Using Support Vector Regression of Laser-Induced Plasma for Laser Additive Manufacturing , 2017, IEEE Transactions on Industrial Electronics.
[148] Yi Luo,et al. Energy characteristics of droplet transfer in wire-arc additive manufacturing based on the analysis of arc signals , 2019, Measurement.
[149] Amir Khajepour,et al. Real-time control of microstructure in laser additive manufacturing , 2016 .
[150] Kellen D. Traxel,et al. Invited Review Article: Metal-additive manufacturing - Modeling strategies for application-optimized designs. , 2018, Additive manufacturing.
[151] Amir Khajepour,et al. Optimal design of laser solid freeform fabrication system and real-time prediction of melt pool geometry using intelligent evolutionary algorithms , 2013, Appl. Soft Comput..
[152] Wang Hao,et al. Study on Evolution Behavior of Geometrical Accuracy Based on Dynamic Characteristics of Molten Pool in Laser-based Direct Energy Deposition , 2019 .
[153] Alexander N. Fedorov,et al. Laser induced breakdown spectroscopy for in-situ multielemental analysis during additive manufacturing process , 2018, Advanced High-Power Lasers and Applications.
[154] Amir Khajepour,et al. Geometry Control of the Deposited Layer in a Nonplanar Laser Cladding Process Using a Variable Structure Controller , 2008 .
[155] Julie M. Schoenung,et al. Observations of particle-melt pool impact events in directed energy deposition , 2018, Additive Manufacturing.
[156] Huang Weidong,et al. Research on molten pool temperature in the process of laser rapid forming , 2008 .
[157] Seung Ki Moon,et al. Design for additive manufacturing in customized products , 2015 .
[158] Kornel Ehmann,et al. Experimentally validated predictions of thermal history and microhardness in laser-deposited Inconel 718 on carbon steel , 2019, Additive Manufacturing.
[159] M. Brandt,et al. Melt pool temperature control using LabVIEW in Nd:YAG laser blown powder cladding process , 2006 .
[160] Bengt Lennartson,et al. Resistance measurements for control of laser metal wire deposition , 2014 .
[161] Kornel Ehmann,et al. Cooling rate effect on tensile strength of laser deposited Inconel 718 , 2018 .
[162] Aitzol Lamikiz,et al. Structured light-based height control for laser metal deposition , 2019, Journal of Manufacturing Processes.
[163] Sergey N. Grigoriev,et al. Optical Monitoring in Laser Cladding of Ti6Al4V , 2012, Journal of Thermal Spray Technology.
[164] Sergey N. Grigoriev,et al. Definition of brightness temperature and restoration of true temperature in laser cladding using infrared camera , 2013 .
[165] Jun Xiong,et al. Effect of inter layer idle time on thermal behavior for multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing , 2018 .
[166] Charalabos C. Doumanidis,et al. Distributed-Parameter Modeling for Geometry Control of Manufacturing Processes With Material Deposition , 2000 .
[167] Frank W. Liou,et al. Development of low‐cost imaging system for laser metal deposition processes , 2011 .
[168] Antonio Ancona,et al. Spectroscopic monitoring of laser blown powder directed energy deposition of Alloy 718 , 2018 .
[169] Ma Honglin,et al. Application of infrared thermography for laser metal-wire additive manufacturing in vacuum , 2017 .
[170] Radovan Kovacevic,et al. Real-time monitoring of laser hot-wire cladding of Inconel 625 , 2014 .
[171] Wei He,et al. In-situ monitoring and deformation characterization by optical techniques; part I: Laser-aided direct metal deposition for additive manufacturing , 2019, Optics and Lasers in Engineering.
[172] Radovan Kovacevic,et al. An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser , 2014 .
[173] Radovan Kovacevic,et al. Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process , 2012 .
[174] J. Hofman,et al. A camera based feedback control strategy for the laser cladding process , 2012 .
[175] Zijue Tang,et al. Review on thermal analysis in laser-based additive manufacturing , 2018, Optics & Laser Technology.
[176] Ali Gökhan Demir,et al. Coaxial laser triangulation for height monitoring in laser metal deposition , 2018 .
[177] Li Feng Liu,et al. Design of Forming Shape Measurement System for Laser Molten Pool in Laser Fabricating , 2010 .
[178] Guangjun Zhang,et al. Adaptive control of deposited height in GMAW-based layer additive manufacturing , 2014 .
[179] Barbara Previtali,et al. Monitoring of laser metal deposition height by means of coaxial laser triangulation , 2018, Optics and Lasers in Engineering.
[180] Antón García-Díaz,et al. OpenLMD, an open source middleware and toolkit for laser-based additive manufacturing of large metal parts , 2018, Robotics and Computer-Integrated Manufacturing.
[181] Radovan Kovacevic,et al. Optical monitoring of high power direct diode laser cladding , 2014 .
[182] Ulrich Thombansen,et al. Illumination for process observation in laser material processing , 2014 .
[183] Geok Soon Hong,et al. Defect detection in selective laser melting technology by acoustic signals with deep belief networks , 2018, The International Journal of Advanced Manufacturing Technology.
[184] Jyoti Mazumder,et al. Composition monitoring using plasma diagnostics during direct metal deposition (DMD) process , 2018, Optics & Laser Technology.
[185] Lijun Song,et al. Identification of phase transformation using optical emission spectroscopy for direct metal deposition process , 2012, LASE.
[186] Ingomar Kelbassa,et al. Correlations of Melt Pool Geometry and Process Parameters During Laser Metal Deposition by Coaxial Process Monitoring , 2014 .
[187] Mohammad Marufuzzaman,et al. In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes , 2019, IISE Trans..
[188] Amir Khajepour,et al. Height Control in Laser Cladding Using Adaptive Sliding Mode Technique: Theory and Experiment , 2010 .
[189] Ashish Kumar Nath,et al. Online assessment of TiC decomposition in laser cladding of metal matrix composite coating , 2017 .
[190] R. Kovacevic,et al. Closed Loop Control of 3D Laser Cladding Based on Infrared Sensing , 2001 .
[191] Ehsan Malekipour,et al. Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review , 2018 .
[192] Kamel Fezzaa,et al. In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process , 2019, Additive Manufacturing.
[193] A. Khajepour,et al. Development of trinocular CCD-based optical detector for real-time monitoring of laser cladding , 2005, IEEE International Conference Mechatronics and Automation, 2005.
[194] Lonnie J. Love,et al. Defect Identification and Mitigation Via Visual Inspection in Large-Scale Additive Manufacturing , 2018, JOM.
[195] Jun Xiong,et al. Investigation on thermal stress evolution induced by wire and arc additive manufacturing for circular thin-walled parts , 2019, Journal of Manufacturing Processes.
[196] Weidong Huang,et al. In situ measurements and thermo-mechanical simulation of Ti–6Al–4V laser solid forming processes , 2019, International Journal of Mechanical Sciences.
[197] Yung C. Shin,et al. In-Process monitoring of porosity during laser additive manufacturing process , 2019, Additive Manufacturing.
[198] Jun Xiong,et al. Deposition height detection and feature point extraction in robotic GTA-based additive manufacturing using passive vision sensing , 2019, Robotics Comput. Integr. Manuf..
[199] James W. Sears,et al. Thermal Imaging of Laser Powder Deposition for Process Diagnostics , 2011 .
[200] Jian Han,et al. Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V , 2017 .
[201] M. Murua,et al. Design and integration of WAAM technology and in situ monitoring system in a gantry machine , 2017 .
[202] P. Michaleris,et al. In situ monitoring and characterization of distortion during laser cladding of Inconel® 625 , 2015 .
[203] Liuping Wang,et al. Model predictive control of laser metal deposition , 2019, The International Journal of Advanced Manufacturing Technology.
[204] Gang Wang,et al. Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography , 2017 .
[205] Xunpeng Qin,et al. Analysis and modeling of melt pool morphology for high power diode laser cladding with a rectangle beam spot , 2018, Optics and Lasers in Engineering.
[206] Hui Chen,et al. Heat propagation of circular thin-walled parts fabricated in additive manufacturing using gas metal arc welding , 2018 .
[207] Jianbo Lei,et al. Measurement on Temperature Distribution of Metal Powder Stream in Laser Fabricating , 2011 .
[208] Vasily N. Lednev,et al. In situ multi-elemental analysis by laser induced breakdown spectroscopy in additive manufacturing , 2019, Additive Manufacturing.
[209] Pan Michaleris,et al. 3D spatial reconstruction of thermal characteristics in directed energy deposition through optical thermal imaging , 2015 .
[210] M. Rethmeier,et al. Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry , 2018, Additive Manufacturing.
[211] Eric R. Burke,et al. In-process thermal imaging of the electron beam freeform fabrication process , 2016, SPIE Commercial + Scientific Sensing and Imaging.
[212] Haiou Zhang,et al. Improving prediction accuracy of thermal analysis for weld-based additive manufacturing by calibrating input parameters using IR imaging , 2013 .
[213] Edward William Reutzel,et al. Multi-sensor investigations of optical emissions and their relations to directed energy deposition processes and quality , 2018 .
[214] Zijue Tang,et al. Effect of thermal characteristics on distortion in laser cladding of AISI 316L , 2019, Journal of Manufacturing Processes.
[215] Bengt Lennartson,et al. Increased stability in laser metal wire deposition through feedback from optical measurements , 2010 .
[216] Lijun Song,et al. Phase congruency melt pool edge extraction for laser additive manufacturing , 2017 .
[217] A. Khajepour,et al. Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing , 2016 .