Cutting of carbon nanotubes assisted with oxygen gas inside a scanning electron microscope

The authors report a cutting technique for carbon nanotubes (CNTs) assisted by the presence of oxygen gas. The cutting procedure is conducted in less than 1min using a low-energy electron beam inside a scanning electron microscope. The oxygen gas was regulated by a mass flow controller and was injected at 1SCCM. It was found that although the total pressure inside the specimen chamber reached 10−2Pa, high-speed cutting occurred only in an area close to the oxygen gas nozzle. They assume that the CNTs are cut only under a low acceleration voltage since the CNT molecules are easily excited and ionized by the low-energy electron beam.

[1]  Angel Rubio,et al.  A mechanism for cutting carbon nanotubes with a scanning tunneling microscope , 2000 .

[2]  Fumihito Arai,et al.  Assembly of nanodevices with carbon nanotubes through nanorobotic manipulations , 2003, Proc. IEEE.

[3]  H. Dai,et al.  Nanotubes as nanoprobes in scanning probe microscopy , 1996, Nature.

[4]  Philip G. Collins,et al.  Materials: Peeling and sharpening multiwall nanotubes , 2000, Nature.

[5]  Yahachi Saito,et al.  Cathode Ray Tube Lighting Elements with Carbon Nanotube Field Emitters , 1998 .

[6]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[7]  H. Seiler,et al.  Secondary electron emission in the scanning electron microscope , 1983 .

[8]  Fumihito Arai,et al.  Three-dimensional Nanorobotic Manipulations of Carbon Nanotubes , 2002, J. Robotics Mechatronics.

[9]  William Mickelson,et al.  Precision cutting of nanotubes with a low-energy electron beam , 2005 .

[10]  Fumihito Arai,et al.  Nanotube multi-functional nanoposition sensors , 2005 .

[11]  J. Bearden,et al.  REEVALUATION OF X-RAY ATOMIC ENERGY LEVELS. , 1967 .

[12]  Zettl,et al.  Low-friction nanoscale linear bearing realized from multiwall carbon nanotubes , 2000, Science.

[13]  P. Nordlander,et al.  Unraveling Nanotubes: Field Emission from an Atomic Wire , 1995, Science.

[14]  A. M. Fennimore,et al.  Rotational actuators based on carbon nanotubes , 2003, Nature.

[15]  F. Banhart,et al.  The Engineering of Hot Carbon Nanotubes with a Focused Electron Beam , 2004 .

[16]  David E. Luzzi,et al.  Electron irradiation effects in single wall carbon nanotubes , 2001 .

[17]  Bingqing Wei,et al.  Tailoring structure and electrical properties of carbon nanotubes using kilo-electron-volt ions , 2003 .

[18]  L. Reimer,et al.  Scanning Electron Microscopy , 1984 .

[19]  Mauricio Terrones,et al.  Cutting single-walled carbon nanotubes with an electron beam: evidence for atom migration inside nanotubes. , 2005, Small.

[20]  Markus Brink,et al.  Electrical cutting and nicking of carbon nanotubes using an atomic force microscope , 2002 .

[21]  R. Ritchie,et al.  Carbon nanotubes as nanoscale mass conveyors , 2004, Nature.

[22]  E. Pop,et al.  Thermal conductance of an individual single-wall carbon nanotube above room temperature. , 2005, Nano letters.

[23]  Satoru Suzuki,et al.  Low-Acceleration-Voltage Electron Irradiation Damage in Single-Walled Carbon Nanotubes , 2004 .