Overlapping ISO/IEC 17025:2017 into Big Data: A Review and Perspectives

The greatest common standard for the expertise of testing and calibration laboratories has recently been bring up to date, considering the newest improvements in laboratory environment and work practices. ISO/IEC 17025:2017, General requirements for the competence of testing and calibration laboratories, is the international reference for laboratories implementing calibration and testing actions through the globe. This article gives a short review on ISO/IEC 17025:2017 and its related data which are increasingly produced every day in the laboratory and suggests Big Data as a fundamental tool of treating such data. ISO/IEC 17025:2017 is gaining a huge part in laboratory legal status and activities; in its side, Big Data is reaching high level of mastery and expansion. On the other hand, there is a huge amount of data around and inside laboratory everyday activities. Besides the experimental and analytical results, there are findings from its financial management. Therefore, Big Data through its enormous capabilities of managing details would imbricate ISO/IEC 17025:2017. The near future would provide more details of how will be the final figure of this intersection.

[1]  N. Mueller,et al.  Introducing the concept of uncertainty of measurement in testing in association with the application of the standard ISO/IEC 17025 , 2002 .

[2]  T. Venelinov.  Uncertainty estimation of the determination of chemical sum parameters in water , 2017, Accreditation and Quality Assurance.

[3]  Carla Schwengber ten Caten,et al.  Organisation of proficiency schemes by testing and calibration laboratories , 2017, Accreditation and Quality Assurance.

[4]  Claudia Zoani,et al.  Preparation of an infant formula proficiency testing material and assessment of its homogeneity and stability , 2015, Accreditation and Quality Assurance.

[5]  C. Trapalis,et al.  Interaction of analytical chemistry with accreditation/certification , 2017, Environmental Science and Pollution Research.

[6]  Carla Schwengber ten Caten,et al.  Current American landscape in laboratory accreditation according to ISO/IEC 17025 , 2017, Accreditation and Quality Assurance.

[7]  Analysis of Uncertainty in Calibration Curves , 2015 .

[8]  Ashok Mohanty,et al.  Proficiency Testing in Chemical Analysis of Iron Ore: Comparison of Statistical Methods for Outlier Rejection , 2014 .

[9]  Teemu Näykki,et al.  Validation of a new measuring system for water turbidity field measurements , 2014, Accreditation and Quality Assurance.

[10]  Filipe Medeiros Albano,et al.  The influence of a quality system according to ISO/IEC 17025 on the performance of Brazilian laboratories in proficiency testing in the environmental area , 2015, Accreditation and Quality Assurance.

[11]  Max Feinberg,et al.  Role of measurement uncertainty in conformity assessment , 2019, 19th International Congress of Metrology (CIM2019).

[12]  A. Badnjević,et al.  Legal Metrology System—Past, Present, Future , 2018 .

[13]  H Richardson,et al.  Medical Laboratories — Requirements for Quality and Competence: An ISO Perspective , 2002, Vox sanguinis.

[14]  Kyriacos C. Tsimillis,et al.  Measurement uncertainty: requirements set in the accreditation standards , 2018, Accreditation and Quality Assurance.

[15]  Roman Szewczyk,et al.  Recent Advances in Systems, Control and Information Technology , 2017 .

[16]  S. V. C. Souza,et al.  Overview of proficiency testing provision in pharmaceutical area in Brazil and an educational scheme for determining mefenamic acid in raw materials , 2017, Accreditation and Quality Assurance.

[17]  M. Laine,et al.  Proficiency test of pH, conductivity and dissolved oxygen concentration field measurements in river water , 2014, Accreditation and Quality Assurance.

[18]  Djamel Ghernaout,et al.  Big Data: Myths, Realities and Perspectives - A Remote Look , 2018 .

[19]  Graham T. Smith,et al.  Measurement and Machine Tools—An Introduction , 2016 .

[20]  Andrew Curry,et al.  ßΣΤΛ testing. , 2021, Diabetes forecast.

[21]  Salah Bouhouche.  Advanced Quality Control Systems Using Intelligent Modeling and Simulation Methods , 2015, Intelligent Techniques in Engineering Management.

[22]  et al. Ghernaout.  Applying big data in water treatment industry: A new era of advance , 2018 .

[23]  S. Ellison,et al.  Measurement uncertainty revisited : Alternative approaches to uncertainty evaluation , 2022 .

[24]  Graham T. Smith,et al.  Uncertainty of Measurement and Statistical Process Control , 2016 .

[25]  Guide to the use of repeatability , reproducibility and trueness estimates in measurement uncertainty estimation , 2002 .

[26]  Ashok Kumar,et al.  Report of the Proficiency Testing in the Pneumatic Pressure Region up to 5 MPa , 2014 .

[27]  Filipe Medeiros Albano,et al.  Proficiency tests for laboratories: a systematic review , 2014, Accreditation and Quality Assurance.

[28]  Thomas Steiger,et al.  COMAR: the international database for certified reference materials—an overview , 2015, Accreditation and Quality Assurance.

[29]  L. Pérez,et al.  Estimation of measurement uncertainty in the determination of orthophosphates in seawater by continuous flow analysis (CFA) , 2014, Accreditation and Quality Assurance.

[30]  J. Beauchamp,et al.  International Organization for Standardization (ISO) , 2015 .

[31]  Kyriacos C. Tsimillis,et al.  Training needs to understand quality assurance , 2015, Accreditation and Quality Assurance.

[32]  Jerzy A. Sładek.  Classic (Nonsimulative) Methods of Measurement Accuracy Assessment , 2016 .

[33]  Aida Jotanovic,et al.  Comparison of different approaches used for the interpretation and presentation of PT results , 2015, Accreditation and Quality Assurance.

[34]  Robert Kaarls,et al.  Laboratory capacity building through the use of metrologically traceable reference values in proficiency testing programmes , 2017, Accreditation and Quality Assurance.

[36]  Erica Iacob,et al.  Experience of accreditation in a surface science laboratory , 2016, Accreditation and Quality Assurance.

[37]  A. Squirrell,et al.  Eurachem/CITAC Guide - Use of Uncertainty Information in Compliance Assessment, 1st edn. , 2015 .

[38]  Hendrik Emons,et al.  The new International Standard ISO 17034: general requirements for the competence of reference material producers , 2017, Accreditation and Quality Assurance.

[39]  Nataliya Hots,et al.  Investigation of Temperature Measurement Uncertainty Components for Infrared Radiation Thermometry , 2016, ICONS 2016.

[40]  J. Westgard,et al.  Measurement uncertainty as a tool for evaluating the ‘grey zone’ to reduce the false negatives in immunochemical screening of blood donors for infectious diseases , 2016, Accreditation and Quality Assurance.

[41]  Igor Renato Bertoni Olivares,et al.  Application of indicators and quality index as a tool for critical analysis and continuous improvement of laboratories accredited against ISO/IEC 17025 , 2015, Accreditation and Quality Assurance.

[42]  Bairong Shen,et al.  LIMS and Clinical Data Management. , 2016, Advances in experimental medicine and biology.

[43]  Ugo Ricci.  Establishment of an ISO 17025:2005 accredited forensic genetics laboratory in Italy , 2014, Accreditation and Quality Assurance.

[44]  Jerzy A. Sładek,et al.  Measurement Uncertainty and Requirements of Production System. Selected Issues of Measurement Uncertainty Theory , 2016 .

[45]  Gloria M. P. Silva,et al.  The lead assessor role in the ISO/IEC 17025:2005 accreditation of Brazilian calibration and testing laboratories by the General Coordination of Accreditation (Cgcre) , 2014, Accreditation and Quality Assurance.

[46]  Khalid Saeed,et al.  Can single-operator laboratories comply with all of the requirements of ISO/IEC 17025:2005? , 2016, Accreditation and Quality Assurance.

[47]  Ken Middlebrook.  Do accredited laboratories perform better in proficiency testing than non-accredited laboratories? , 2017, Accreditation and Quality Assurance.

[48]  Siu-kay Wong,et al.  Risk-based thinking for chemical testing , 2017, Accreditation and Quality Assurance.

[49]  Magda Cotman,et al.  Proficiency testing of wastewater sampling: What did we learn? , 2015, Accreditation and Quality Assurance.