Consideraciones de diseño de un control doble lazo de un convertidor boost para la corrección del factor de potencia

This work presents an analytical study with its verification by simulation of a double-loop control strategy on boost converter for power factor correction. This strategy is based on a scheme with an outer loop for regulating the output voltage and an inner loop for input current control. Both control loops have certain specifications transient and a good level of attenuation to disturbances. Some PSIM simulations illustrate and verify the dynamic behavior of the proposed methodology.

[1]  W. Eberle,et al.  Control Loop Design for a PFC Boost Converter With Ripple Steering , 2013, IEEE Transactions on Industry Applications.

[2]  I. Iskender,et al.  THE ANALYSIS OF ACDC BOOST PFC CONVERTER BASED ON PEAK AND HYSTERESIS CURRENT CONTROL TECHNIQUES , 2011 .

[3]  Yen-Shin Lai,et al.  Bandwidth-based analysis and controller design of power factor corrector for universal applications , 2012, 2012 IEEE International Conference on Industrial Technology.

[4]  Carlos Andrés,et al.  Control robusto de convertidores conmutados de cc/cc mediante desigualdades matriciales lineales , 2012 .

[5]  Myung-Joong Youn,et al.  A new small signal modeling of average current mode control , 1998, PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196).

[6]  Fei Zhang,et al.  A Novel PCCM Boost PFC Converter With Fast Dynamic Response , 2011, IEEE Transactions on Industrial Electronics.

[7]  Slobodan Cuk,et al.  A general unified approach to modelling switching-converter power stages , 1976, 1970 IEEE Power Electronics Specialists Conference.

[8]  Katsuhiko Ogata,et al.  Modern Control Engineering , 1970 .

[9]  Luis Martinez-Salamero,et al.  Modular-based PFC for low power three-phase wind generator , 2011, 2011 7th International Conference-Workshop Compatibility and Power Electronics (CPE).

[10]  M.M. Hernando,et al.  Steady-State Analysis and Modeling of Power Factor Correctors With Appreciable Voltage Ripple in the Output-Voltage Feedback Loop to Achieve Fast Transient Response , 2009, IEEE Transactions on Power Electronics.