Exploiting waste heat potential by long distance heat transmission: Design considerations and techno-economic assessment

Abstract Harvesting the waste heat from industrial processes or power plants is a very effective way to increase the efficiency of an energy system. Available usually as low-grade heat, it needs to be transferred to the points of consumption in order to be utilized. Feasible heat transmission distance is usually estimated by empiricism or by considering a limited number of parameters with the lack of a methodological tool to estimate this distance based on actual generic data. This work analyzes the particularities of long distance heat transmission by using a detailed techno-economic model for the estimation of heat transport costs including all relevant capital and operating expenditures. Sensitivity analysis is conducted to show the effect of transmission distance, supply temperatures and market prices, covering the most common technical and economic parameters found in literature. This model is also used to identify the maximum economically feasible transmission distance that meets a specified economic criterion and to derive a ‘rule of thumb’ equation.

[1]  Tomas Ekvall,et al.  System profitability of excess heat utilisation – A case-based modelling analysis , 2016 .

[2]  Brian Vad Mathiesen,et al.  4th Generation District Heating (4GDH) Integrating smart thermal grids into future sustainable energy systems , 2014 .

[3]  Yacine Rezgui,et al.  District heating and cooling optimization and enhancement – towards integration of renewables, storage and smart grid , 2017 .

[4]  Ruzhu Wang,et al.  A review on transportation of heat energy over long distance: Exploratory development , 2009 .

[5]  Majid Amidpour,et al.  A new approach in pinch technology considering piping costs in total cost targeting for heat exchanger network , 2009 .

[6]  Jonathan B. Norman,et al.  Spatial modelling of industrial heat loads and recovery potentials in the UK , 2010 .

[7]  R Lowe.  Combined heat and power considered as a virtual steam cycle heat pump , 2011 .

[8]  Ali Keçebaş,et al.  Economic and environmental impacts of insulation in district heating pipelines , 2011 .

[9]  Thore Berntsson,et al.  Excess Heat from Kraft Pulp Mills: Trade-offs between Internal and External Use in the Case of Sweden - Part 1: Methodology , 2008 .

[10]  I. Khamis,et al.  DE-TOP: A new IAEA tool for the thermodynamic evaluation of nuclear desalination , 2013 .

[11]  Brian Vad Mathiesen,et al.  Smart Energy Europe: The technical and economic impact of one potential 100% renewable energy scenario for the European Union , 2016 .

[12]  Geoffrey P. Hammond,et al.  Heat recovery opportunities in UK industry , 2014 .

[13]  Srbislav Genić,et al.  Economic optimization of pipe diameter for complete turbulence , 2012 .

[14]  Marc A. Rosen,et al.  District heating and cooling: Review of technology and potential enhancements , 2012 .

[15]  Sven Werner,et al.  International review of district heating and cooling , 2017 .

[16]  Robin Smith,et al.  Process integration of low grade heat in process industry with district heating networks , 2012 .

[17]  Sven Werner,et al.  Achieving low return temperatures from district heating substations , 2014 .

[18]  C. F. Colebrook,et al.  Experiments with Fluid Friction in Roughened Pipes , 1937 .

[19]  Rosemary Norman,et al.  Low grade thermal energy sources and uses from the process industry in the UK , 2012 .

[20]  M. J. Moran,et al.  Exergy Analysis: Principles and Practice , 1994 .

[21]  H. Safa,et al.  Heat recovery from nuclear power plants , 2012 .

[22]  Audrius Bagdanavicius,et al.  Combined analysis of electricity and heat networks , 2014 .

[23]  Brian Elmegaard,et al.  Industrial excess heat for district heating in Denmark , 2017 .