Study on the effect of CeO2 for fabricating in-situ TiB2/A356 composites with improved mechanical properties
暂无分享,去创建一个
[1] R. Mitra,et al. Effect of pre-cold rolling on the evolution of microstructure, microtexture, and mechanical properties of the mushy state rolled in-situ Al-4.5Cu-5TiB2 composite , 2018, Materials Characterization.
[2] Zhiwei Liu,et al. On the preparation and mechanical properties of in situ small-sized TiB2/Al-4.5Cu composites via ultrasound assisted RD method , 2018, Journal of Alloys and Compounds.
[3] Zhiwei Liu,et al. On the Supplementation of Magnesium and Usage of Ultrasound Stirring for Fabricating In Situ TiB2/A356 Composites with Improved Mechanical Properties , 2018, Metallurgical and Materials Transactions A.
[4] K. Pericleous,et al. Coupling of Acoustic Cavitation with Dem-Based Particle Solvers for Modeling De-agglomeration of Particle Clusters in Liquid Metals , 2017, Metallurgical and Materials Transactions A.
[5] A. Ghose,et al. Effect of rotary electromagnetic stirring during solidification of In-situ Al-TiB2 composites , 2017 .
[6] Huijun Kang,et al. The bimodal effect of La on the microstructures and mechanical properties of in-situ A356–TiB2 composites , 2015 .
[7] Hao-wei Wang,et al. High cycle fatigue behavior of the in-situ TiB2/7050 composite , 2015 .
[8] Tatsuo Sato,et al. Formation and reversion of clusters during natural aging and subsequent artificial aging in an Al–Mg–Si alloy , 2015 .
[9] Zhiwei Liu,et al. Ultrasound assisted salts–metal reaction for synthesizing TiB2 particles at low temperature , 2015 .
[10] Tongmin Wang,et al. TiB2 reinforced aluminum based in situ composites fabricated by stir casting , 2015 .
[11] Tong Gao,et al. Preparation of a novel Al–3B–5Sr master alloy and its modification and refinement performance on A356 alloy , 2014 .
[12] Tongmin Wang,et al. Effects of Sr on the microstructure and mechanical properties of in situ TiB2 reinforced A356 composite , 2014 .
[13] J. Wang,et al. CeO2 induced dispersive distribution of TiB2 particles in in situ TiB2/Al composite , 2014 .
[14] Z. Fan,et al. Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy , 2014 .
[15] L. Arnberg,et al. The effect of Ca and P interaction on the Al–Si eutectic in a hypoeutectic Al–Si alloy , 2014 .
[16] Yi Wu,et al. Mechanical properties of in-situ TiB2/A356 composites , 2014 .
[17] H. Liao,et al. Effect of Si content on microstructure and mechanical properties of Al–Si–Mg alloys , 2014 .
[18] J. Wang,et al. Study on squeeze casting of an in situ 5 vol.-% TiB2/2014 Al composite , 2013 .
[19] H. Liao,et al. Hardening response and precipitation behavior of Al–7%Si–0.3%Mg alloy in a pre-aging process , 2013 .
[20] Pengting Li,et al. Distribution of TiB2 particles and its effect on the mechanical properties of A390 alloy , 2012 .
[21] D. S. B. Heidary,et al. Theoretical and experimental study on settling of SiC particles in composite slurries of aluminum A356/SiC , 2011 .
[22] Jun Wang,et al. Effects of CeO2 additive on the microstructure and mechanical properties of in situ TiB2/Al composite , 2011 .
[23] Gang Chen,et al. In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites , 2010 .
[24] Jing-Chie Lin,et al. Effect of trace La addition on the microstructures and mechanical properties of A356 (Al–7Si–0.35Mg) aluminum alloys , 2009 .
[25] T. Meek,et al. Refinement of eutectic silicon phase of aluminum A356 alloy using high-intensity ultrasonic vibration , 2006 .
[26] Xianfeng Li,et al. Effective elastic moduli of Al–Si composites reinforced in situ with TiB2 particles , 2006 .
[27] L. Arnberg,et al. Segregation of particles and its influence on the morphology of the eutectic silicon phase in Al–7 wt.% Si alloys , 2006 .
[28] B. S. Murty,et al. Effect of TiB2 particles on aging response of Al–4Cu alloy , 2004 .
[29] S. Pantelakis,et al. Quality evaluation of A357 cast aluminum alloy specimens subjected to different artificial aging treatment , 2004 .
[30] J. Yeh,et al. Aging behavior and tensile properties of 6061Al-0.3 μm Al2O3p particle composites produced by reciprocating extrusion , 2001 .
[31] Y. Y. Chen,et al. Solidification and interfacial structure of in situ Al-4.5Cu/TiB2 composite , 2000 .
[32] Jae-pyoung Ahn,et al. Control of the interface in SiC/Al composites , 1999 .
[33] D. Lloyd. Particle reinforced aluminium and magnesium matrix composites , 1994 .
[34] A. Hellawell,et al. The mechanism of silicon modification in aluminum-silicon alloys: Impurity induced twinning , 1987 .