Tribological Behavior of Carbon-Fiber-Reinforced Polymer with Highly Oriented Graphite Nanoplatelets

[1]  L. Tong,et al.  Static strength of CFRP-strengthened preloaded circular concrete-filled steel tube stub columns, Part I: Experimental test , 2023, Thin-Walled Structures.

[2]  W. Jin,et al.  A new flexural strength model of CFRP-strengthened RC beams with intermediate crack induced debonding failure , 2023, Composite Structures.

[3]  Guowen Xu,et al.  Flexural strengthening of full-scale RC columns with Adhesively-bonded longitudinal CFRP plates: An experimental investigation , 2023, Journal of Building Engineering.

[4]  Yunhua Yu,et al.  Enhanced longitudinal compressive strength of CFRP composites with interlaminar CNT film prepreg from hot-melt pre-impregnation , 2022, Composites Communications.

[5]  Zongping Chen,et al.  Mechanical performance of marine concrete filled CFRP-aluminum alloy tube columns under axial compression: Experiment and finite element analysis , 2022, Engineering Structures.

[6]  P. Paczos,et al.  The Use of CFRP for Structural Reinforcement—Literature Review , 2022, Metals.

[7]  Zhixiong Huang,et al.  Enhanced thermal and mechanical properties of carbon fiber/epoxy composites interleaved with graphene/SiCnw nanostructured films , 2022, Composites Part A: Applied Science and Manufacturing.

[8]  Jiu-hua Xu,et al.  Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy , 2021, International Journal of Extreme Manufacturing.

[9]  Qihua Wang,et al.  Significantly enhanced tribology and thermal management by dual‐network graphene/epoxy composites , 2021 .

[10]  Ming Chen,et al.  Performance and mechanism evaluation during milling of CFRP laminates under cryogenic-based conditions , 2021 .

[11]  Xiao-dong Qi,et al.  Highly thermally conductive epoxy composites with anti-friction performance achieved by carbon nanofibers assisted graphene nanoplatelets assembly , 2021 .

[12]  Lifeng Wang,et al.  Vibration coupling effects and machining behavior of ultrasonic vibration plate device for creep-feed grinding of Inconel 718 nickel-based superalloy , 2021 .

[13]  S. Bhowmik,et al.  Effect of Different Constraint on Tribological Behaviour of Natural Fibre/Filler Reinforced Polymeric Composites: a Review , 2020, Silicon.

[14]  S. Grasso,et al.  Unusual butterfly-shaped magnetization signals and spin-glass-like behaviour in highly oriented pyrolytic graphite , 2020 .

[15]  W. Ding,et al.  Effects of h-BN particles on the microstructure and tribological property of self-lubrication CBN abrasive composites , 2020 .

[16]  V. Srivastava,et al.  Friction and wear behavior of GNPs functionalized carbon fiber reinforced polymer matrix composites under high-frequency reciprocating conditions , 2020, Materials Research Express.

[17]  J. Qiu,et al.  Improved tribological properties of polyimide composites by micro–nano reinforcement , 2019, Journal of Applied Polymer Science.

[18]  Fei Ren,et al.  An investigation of drilling high-strength CFRP composites using specialized drills , 2019, The International Journal of Advanced Manufacturing Technology.

[19]  Yu Tian,et al.  Recent advances in friction and lubrication of graphene and other 2D materials: Mechanisms and applications , 2019, Friction.

[20]  Fengyuan Yan,et al.  MoS2 nanosheets-decorated carbon fiber hybrid for improving the friction and wear properties of polyimide composite , 2018, Composites Part A: Applied Science and Manufacturing.

[21]  H. Masjuki,et al.  Tribological performance of nanoparticles as lubricating oil additives , 2016, Journal of Nanoparticle Research.

[22]  A. Ureña,et al.  Thermal conductivity and lap shear strength of GNP/epoxy nanocomposites adhesives , 2016 .

[23]  Hong Huang,et al.  Enhancement of the tribological properties of carbon fiber/epoxy composite by grafting carbon nanotubes onto fibers , 2016 .

[24]  Hossein Rahmani,et al.  Preparation and characterization of functionalized graphene oxide/carbon fiber/epoxy nanocomposites , 2015 .

[25]  R. Al-Mahaidi,et al.  Effect of CFRP properties, on the bond characteristics between steel and CFRP laminate under quasi-static loading , 2015 .

[26]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[27]  Chao Deng,et al.  Influence of graphene oxide coatings on carbon fiber by ultrasonically assisted electrophoretic deposition on its composite interfacial property , 2015 .

[28]  Oren Regev,et al.  Thermally Conductive Graphene-Polymer Composites: Size, Percolation, and Synergy Effects , 2015 .

[29]  Jong-Hyun Ahn,et al.  Chemical vapor deposition-grown graphene: the thinnest solid lubricant. , 2011, ACS nano.

[30]  Yufu Xu,et al.  Synergistic Effect of Nano-MoS2 and Anatase Nano-TiO2 on the Lubrication Properties of MoS2/TiO2 Nano-Clusters , 2011 .

[31]  M. Koyama,et al.  A computational chemistry study on friction of h-MoS(2). Part I. Mechanism of single sheet lubrication. , 2009, The journal of physical chemistry. B.

[32]  R. Wijk,et al.  Load dependency of the coefficient of friction of oral mucosa , 2007 .

[33]  Constantinos Soutis,et al.  Fibre reinforced composites in aircraft construction , 2005 .

[34]  L. Fang,et al.  Wear reduction mechanism of graphite and MoS2 in epoxy composites , 2004 .

[35]  Haoyang Tang,et al.  Friction process analysis of carbon fiber-carbon nanotube multiscale hybrid reinforced epoxy with excellent tribological performance , 2022, Tribology International.

[36]  Jiu-hua Xu,et al.  Alumina abrasive wheel wear in ultrasonic vibration-assisted creep-feed grinding of Inconel 718 nickel-based superalloy , 2021 .

[37]  Yu Su,et al.  An investigation on tribological properties and lubrication mechanism of graphite nanoparticles as vegetable based oil additive , 2015 .