Characterization of the flame photometric detector in the sulphur mode

[1]  P. Marriott,et al.  Some Characteristics of a Flame Photometric Detector in Sulphur and Phosphorus Modes , 1982 .

[2]  S. Gangwal,et al.  Response Correlation of Low Molecular Weight Sulfur Compounds Using a Novel Flame Photometric Detector , 1979 .

[3]  S. O. Farwell,et al.  Relative FPD Responses for a Systematic Group of Sulfur-Containing Compounds , 1978 .

[4]  M. Maruyama,et al.  Behavior of Organic Sulfur Compounds in Flame Photometric Detectors , 1978 .

[5]  S. O. Farwell,et al.  Potential Error in Linearized FPD Responses for Sulfur , 1977 .

[6]  C. Pearson.  The Determination of Trace Mercaptans and Sulfides in Natural Gas by a Gas Chromatography-Flame Photometric Detector Technique , 1976 .

[7]  J. Moyers,et al.  Sulfur FPD Flow Optimization and Response Normalization with a Variable Exponential Function Device , 1975 .

[8]  R. Greenhalgh,et al.  Optimisation of the sulphur phosphorus emission detector and comparison with the electrolytic conductivity detector to some sulphur-containing insecticides and herbicides. , 1974, International journal of environmental analytical chemistry.

[9]  Yoshihito Suzuki,et al.  Characteristics of S2 emission intensity with a flame photometric detector , 1973 .

[10]  R. Stevens,et al.  Gas chromatography of reactive sulfur gases in air at the parts-per-billion level. , 1971, Analytical chemistry.

[11]  G. Guiochon.  Gas chromatography and nanochemistry , 1970 .

[12]  A. Mizany.  Some Characteristics of the Melpar Flame Photometric GC Detector in the Sulfur Mode , 1970 .