Effect of Some Design Parameters on the Flow Fields and Power Consumption in a Vessel Stirred by a Rushton Turbine

Knowledge of the fluid dynamic characteristics in a stirred vessel is essential for reliable design and scale-up of a mixing system. In this paper, 3D hydrodynamics in a vessel agitated by a Rushton turbine were numerically studied (with the help of a CFD computer program (CFX 13.0)). The study was carried out covering a wide Reynolds number range: 10 4 – 10 5 . Computations, based on control volume method, were made using the k-e model. Our main purpose was to investigate the effect of vessel configuration and agitation rates on the flow structure and power consumption. Three types of vessels were used: unbaffled, baffled and a vessel with slots placed at the external perimeter of its vertical wall. The effect of slot length has been investigated. The comparison of our predicted results with available experimental data shows a satisfactory agreement.

[1]  Michael Yianneskis,et al.  Vortex Identification Methodology for Feed Insertion Guidance in Fluid Mixing Processes , 2007 .

[2]  Michael Yianneskis,et al.  Vortex tracking and mixing enhancement in stirred processes , 2007 .

[3]  Alberto Brucato,et al.  Turbulent flow in closed and free-surface unbaffled tanks stirred by radial impellers , 1996 .

[4]  Carl M. Stoots,et al.  Mean velocity field relative to a Rushton turbine blade , 1995 .

[5]  Mark F. Reeder,et al.  Optimize mixing by using the proper baffles , 2002 .

[6]  Alain Liné,et al.  Characterization of Trailing Vortices Generated by a Rushton Turbine , 2004 .

[7]  A. D. Gosman,et al.  Full flow field computation of mixing in baffled stirred vessels , 1993 .

[8]  Suzanne M. Kresta,et al.  Prediction of the three-dimensional turbulent flow in stirred tanks , 1991 .

[9]  Jieyu Zhang,et al.  Investigation on Eccentric Agitation in the Stirred Vessel Using 3D-Laser Doppler Velocimeter , 2006 .

[10]  S. Balachandar,et al.  Reynolds number scaling of flow in a Rushton turbine stirred tank. Part I - Mean flow, circular jet and tip vortex scaling , 2005 .

[11]  M. Yianneskis,et al.  On the interaction of trailing and macro-instability vortices in a stirred vessel-enhanced energy levels and improved mixing potential , 2009 .

[12]  Kevin J. Roberts,et al.  Modeling Turbulent Flows with Free-Surface in Unbaffled Agitated Vessels , 2006 .

[13]  Somnath C. Roy,et al.  Flow structure and the effect of macro-instabilities in a pitched-blade stirred tank , 2010 .

[14]  G. K. Patterson,et al.  Laser-Doppler measurements of turbulent-flow parameters in a stirred mixer , 1989 .

[15]  Ville Alopaeus,et al.  Analysis of Stirred Tanks with Two-Zone Models , 2009 .

[16]  K. C. Lee,et al.  On the origin, frequency and magnitude of macro-instabilities of the flows in stirred vessels , 2003 .

[17]  Alain Liné,et al.  Experimental analysis of hydrodynamics in a radially agitated tank , 2002 .

[18]  P. Mavros,et al.  FLOW VISUALIZATION IN STIRRED VESSELS A Review of Experimental Techniques , 2001 .

[19]  S L Yeoh,et al.  Numerical Simulation of Turbulent Flow Characteristics in a Stirred Vessel Using the LES and RANS Approaches with the Sliding/Deforming Mesh Methodology , 2004 .

[20]  Vivek V. Ranade,et al.  An efficient computational model for simulating flow in stirred vessels: a case of Rushton turbine , 1997 .

[21]  Jyeshtharaj B. Joshi,et al.  Effect of impeller design on the flow pattern and mixing in stirred tanks , 2006 .

[22]  A. Paglianti,et al.  Spectral and wavelet analysis of the flow pattern transition with impeller clearance variations in a stirred vessel , 2003 .

[23]  K. C. Lee,et al.  On the trailing vortices around hydrofoil impeller blades , 1999 .

[24]  Zied Driss,et al.  Effect of the turbulence models on Rushton turbine generated flow in a stirred vessel , 2011 .

[25]  Ivan Fořt,et al.  Power Input of High-Speed Rotary Impellers , 2001 .

[26]  Houari Ameur,et al.  Numerical study of fluid flow and power consumption in a stirred vessel with a Scaba 6SRGT impeller , 2011 .

[27]  Zhengming Gao,et al.  Effects of the Blade Shape on the Trailing Vortices in Liquid Flow Generated by Disc Turbines , 2011 .

[28]  Ronald Adrian,et al.  Integrated experimental and computational approach to simulation of flow in a stirred tank , 2001 .

[29]  Alberto Brucato,et al.  Large-eddy simulation of turbulent flow in an unbaffled stirred tank driven by a Rushton turbine , 2005 .

[30]  Catherine Xuereb,et al.  An experimental and computational study of the vortex shape in a partially baffled agitated vessel , 2007 .

[31]  Alvin W. Nienow,et al.  Use of angle resolved PIV to estimate local specific energy dissipation rates for up- and down-pumping pitched blade agitators in a stirred tank , 2009 .