Preparation of monodisperse biodegradable polymer microparticles using a microfluidic flow-focusing device for controlled drug delivery.

Degradable microparticles have broad utility as vehicles for drug delivery and form the basis of several therapies approved by the US Food and Drug Administration. Conventional emulsion-based methods of manufacturing produce particles with a wide range of diameters (and thus kinetics of release) in each batch. This paper describes the fabrication of monodisperse, drug-loaded microparticles from biodegradable polymers using the microfluidic flow-focusing (FF) devices and the drug-delivery properties of those particles. Particles are engineered with defined sizes, ranging from 10 microm to 50 microm. These particles are nearly monodisperse (polydispersity index = 3.9%). A model amphiphilic drug (bupivacaine) is incorporated within the biodegradable matrix of the particles. Kinetic analysis shows that the release of the drug from these monodisperse particles is slower than that from conventional methods of the same average size but a broader distribution of sizes and, most importantly, exhibit a significantly lower initial burst than that observed with conventional particles. The difference in the initial kinetics of drug release is attributed to the uniform distribution of the drug inside the particles generated using the microfluidic methods. These results demonstrate the utility of microfluidic FF for the generation of homogenous systems of particles for the delivery of drugs.

[1]  Robert Langer,et al.  Microfluidic platform for controlled synthesis of polymeric nanoparticles. , 2008, Nano letters.

[2]  Christoph A. Merten,et al.  Droplet-based microfluidic platforms for the encapsulation and screening of Mammalian cells and multicellular organisms. , 2008, Chemistry & biology.

[3]  T. Nisisako,et al.  Microfluidic large-scale integration on a chip for mass production of monodisperse droplets and particles. , 2008, Lab on a chip.

[4]  K. Johnston,et al.  Encapsulation of protein nanoparticles into uniform-sized microspheres formed in a spinning oil film , 2005, AAPS PharmSciTech.

[5]  S. Takeuchi,et al.  Monodisperse Alginate Hydrogel Microbeads for Cell Encapsulation , 2007 .

[6]  Ji Guo,et al.  Nanofabricated particles for engineered drug therapies: a preliminary biodistribution study of PRINT nanoparticles. , 2007, Journal of controlled release : official journal of the Controlled Release Society.

[7]  Zhibing Hu,et al.  Fabrication of monodisperse gel shells and functional microgels in microfluidic devices. , 2007, Angewandte Chemie.

[8]  G. Whitesides,et al.  Flowing lattices of bubbles as tunable, self-assembled diffraction gratings. , 2006, Small.

[9]  Ethan Tumarkin,et al.  Microfluidic production of biopolymer microcapsules with controlled morphology. , 2006, Journal of the American Chemical Society.

[10]  Dhananjay Dendukuri,et al.  Continuous-flow lithography for high-throughput microparticle synthesis , 2006, Nature materials.

[11]  Delai L Chen,et al.  Microgram-scale testing of reaction conditions in solution using nanoliter plugs in microfluidics with detection by MALDI-MS. , 2006, Journal of the American Chemical Society.

[12]  G. Whitesides,et al.  Formation of droplets and bubbles in a microfluidic T-junction-scaling and mechanism of break-up. , 2006, Lab on a chip.

[13]  A. Lee,et al.  Alternating droplet generation and controlled dynamic droplet fusion in microfluidic device for CdS nanoparticle synthesis. , 2006, Lab on a chip.

[14]  P. Deluca,et al.  Methods to Assess in Vitro Drug Release from Injectable Polymeric Particulate Systems , 2006, Pharmaceutical Research.

[15]  Todd Thorsen,et al.  Synthesis of monodisperse biodegradable microgels in microfluidic devices. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[16]  Joseph M DeSimone,et al.  Direct fabrication and harvesting of monodisperse, shape-specific nanobiomaterials. , 2005, Journal of the American Chemical Society.

[17]  大房 健 基礎講座 電気泳動(Electrophoresis) , 2005 .

[18]  D. Weitz,et al.  Monodisperse Double Emulsions Generated from a Microcapillary Device , 2005, Science.

[19]  George M. Whitesides,et al.  An Axisymmetric Flow‐Focusing Microfluidic Device , 2005 .

[20]  G. Whitesides,et al.  Generation of monodisperse particles by using microfluidics: control over size, shape, and composition. , 2005, Angewandte Chemie.

[21]  George M. Whitesides,et al.  Formation of monodisperse bubbles in a microfluidic flow-focusing device , 2004 .

[22]  R. Langer,et al.  Sciatic Nerve Blockade with Lipid-Protein-Sugar Particles Containing Bupivacaine , 2000, Pharmaceutical Research.

[23]  R. Ismagilov,et al.  Screening of protein crystallization conditions on a microfluidic chip using nanoliter-size droplets. , 2003, Journal of the American Chemical Society.

[24]  D. Louis,et al.  Prolonged duration local anesthesia from tetrodotoxin-enhanced local anesthetic microspheres , 2003, Pain.

[25]  H. Stone,et al.  Formation of dispersions using “flow focusing” in microchannels , 2003 .

[26]  Cory Berkland,et al.  Precise control of PLG microsphere size provides enhanced control of drug release rate. , 2002, Journal of controlled release : official journal of the Controlled Release Society.

[27]  Toshiro Higuchi,et al.  Droplet formation in a microchannel network. , 2002, Lab on a chip.

[28]  A. Gañán-Calvo,et al.  Perfectly monodisperse microbubbling by capillary flow focusing. , 2001, Physical review letters.

[29]  J. Gilman,et al.  Nanotechnology , 2001 .

[30]  D W Pack,et al.  Fabrication of PLG microspheres with precisely controlled and monodisperse size distributions. , 2001, Journal of controlled release : official journal of the Controlled Release Society.

[31]  S. Quake,et al.  Dynamic pattern formation in a vesicle-generating microfluidic device. , 2001, Physical review letters.

[32]  R Langer,et al.  Responsive polymeric delivery systems. , 2001, Advanced drug delivery reviews.

[33]  G. Whitesides,et al.  Fabrication of microfluidic systems in poly(dimethylsiloxane) , 2000, Electrophoresis.

[34]  K. Shakesheff,et al.  Polymeric systems for controlled drug release. , 1999, Chemical reviews.

[35]  Jeong-Ok Lim,et al.  Prolonged Regional Nerve Blockade: Injectable Biodegradable Bupivacaine/Polyester Microspheres , 1996, Anesthesiology.

[36]  P. Sansdrap,et al.  Influence of manufacturing parameters on the size characteristics and the release profiles of nifedipine from poly(DL-lactide-co-glycolide) microspheres , 1993 .

[37]  Sumie Yoshioka,et al.  Preparation of poly(l-lactide) microspheres of different crystalline morphology and effect of crystalline morphology on drug release rate , 1991 .

[38]  R Langer,et al.  New methods of drug delivery. , 1990, Science.

[39]  C. Melia,et al.  Microencapsulation using emulsification/solvent evaporation: an overview of techniques and applications. , 1990, Critical reviews in therapeutic drug carrier systems.

[40]  J. Benoit,et al.  Biodegradable cisplatiim microspheres prepared by the solvent evaporation method: Morphology and release characteristics , 1988 .

[41]  Robert Langer,et al.  Chemical and Physical Structure of Polymers as Carriers for Controlled Release of Bioactive Agents: A Review , 1983 .

[42]  T. Jessell PAIN , 1982, The Lancet.