Localized Temperature Control in Microchannel Reactors Using Bimetallic Thermally-Actuated Valves

The smaller physical dimensions of microchannel reactors result in substantial reductions in capital and operating cost. However, microreactor control is challenging because of the difficulty of implementing distributed measurement devices and actuators. Using an autothermal catalytic plate reactor coupling steam-methane reforming and methane combustion as a test case, we propose a novel temperature control method using bimetallic strips that function as thermally actuated valves to regulate fluid flow in the microchannels. Bimetallic strips convert temperature variations into mechanical displacement, and by proper placement in the reactor channels, they can function as valves that close and open with temperature changes. We discuss the necessary design decisions and show through simulations that the thermally actuated valves contribute to an inherently safer design of microchannel reactors. We demonstrate that they can compensate for unequal flow distribution to the microchannels and successfully reject ...

[1]  Paolo Ciambelli,et al.  Micro-Scale Catalytic Reactor for Syngas Production , 2010 .

[2]  Gerhart Eigenberger,et al.  Efficient reactor concepts for coupling of endothermic and exothermic reactions , 2002 .

[3]  Michael Baldea,et al.  Pseudodistributed Feed Configurations for Catalytic Plate Microchannel Reactors , 2014 .

[4]  Michael Baldea,et al.  A thermal‐flywheel approach to distributed temperature control in microchannel reactors , 2013 .

[5]  Andrzej Stankiewicz,et al.  Opportunities and challenges for process control in process intensification , 2012 .

[6]  Laura J. Silva,et al.  Microchannel reactor architecture enables greener processes , 2010 .

[7]  Yongchan Kim,et al.  Minimization of hot spot in a microchannel reactor for steam reforming of methane with the stripe combustion catalyst layer , 2013 .

[8]  Yongchan Kim,et al.  Optimization of a counter-flow microchannel reactor using hydrogen assisted catalytic combustion for steam reforming of methane , 2014 .

[9]  Michael Baldea,et al.  Robust autothermal microchannel reactors , 2015, Comput. Chem. Eng..

[10]  Michael Baldea,et al.  Optimizing the catalyst distribution for countercurrent methane steam reforming in plate reactors , 2011 .

[11]  Milorad P. Dudukovic,et al.  Coupling exothermic and endothermic reactions in adiabatic reactors , 2008 .

[12]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .

[13]  Michael Baldea,et al.  From process integration to process intensification , 2015, Comput. Chem. Eng..

[14]  Iftekhar A. Karimi,et al.  Evaluation of utilization alternatives for stranded natural gas , 2012 .

[15]  Richard A. Dawe,et al.  Review of ways to transport natural gas energy from countries which do not need the gas for domestic use , 2003 .

[16]  Milorad P. Dudukovic,et al.  Recuperative coupling of exothermic and endothermic reactions , 2006 .

[17]  Asterios Gavriilidis,et al.  Catalytic combustion assisted methane steam reforming in a catalytic plate reactor , 2003 .

[18]  Michael Baldea,et al.  Dynamics and control of autothermal reactors for the production of hydrogen , 2007, 2007 European Control Conference (ECC).

[19]  P. Pfeifer,et al.  Comparison between a micro reactor with multiple air inlets and a monolith reactor for oxidative steam reforming of diesel , 2014 .

[20]  Jacques Mettes,et al.  Design of an annular microchannel reactor (AMR) for hydrogen and/or syngas production via methane steam reforming , 2014 .