Flexible rolling of aluminium alloy sheet—Process optimization and control of materials properties

Abstract Continuously increasing demands for consumption-optimized automotive concepts require steady development of weight-saving potentials. In the area of steel lightweight design, flexible rolling of tailor-rolled blanks, TRB, is a well-established technology applied worldwide in all automotive categories. In the future, with the current tendency towards an increased application of aluminium sheets in the car body and chassis, flexible rolling of aluminium will become more and more attractive. In the present paper, the status of the process and materials development of Al-TRB is presented and the prospective of the future development is outlined. First, the possible development directions are addressed, followed by an outline of the process chain for the Al-TRB fabrication together with several application examples. Considering work-hardening AA 5xxx series and age-hardening AA 6xxx series alloys for automotive applications, lab-scale experiments have been conducted in order to elucidate the range of properties which can be realized through flexible rolling while maintaining reproducible constant materials properties according to specification. Large-scale trials were performed to demonstrate that the manufacturing of Al-TRBs is feasible, in that these alloys can be processed in industrial scale to provide homogeneous materials properties over the relevant thickness range for automotive applications.

[1]  Gerhard Hirt,et al.  Tailored Profiles Made of Tailor Rolled Strips by Roll Forming – Part 1 of 2 , 2012 .

[2]  W. S. Miller,et al.  Recent development in aluminium alloys for the automotive industry , 2000 .

[3]  J. Enser,et al.  Characterization of AMAG AL6-CHA Sheet Material for Chassis Application in the Automotive Industry , 2014 .

[4]  D. Lloyd,et al.  Microstructural control of aluminum sheet used in automotive applications , 1995 .

[5]  J. Embury,et al.  Precipitation strengthening of the aluminum alloy AA6111 , 2003 .

[6]  D. Lloyd,et al.  Effects of Si on the aging behaviour and formability of aluminium alloys based on AA6016 , 2001 .

[7]  D. Lloyd,et al.  Factors affecting the strength and formability of alloys based on Al–3 wt.% Mg , 2001 .

[8]  Matthias Kleiner,et al.  Metal forming techniques for lightweight construction , 2006 .

[9]  Wolfgang Bleck,et al.  Analysis of microstructure and mechanical properties of different high strength carbon steels after hot stamping , 2011 .

[10]  R. Kopp,et al.  Flexibly Rolled Sheet Metal and Its Use in Sheet Metal Forming , 2005 .

[11]  Marion Merklein,et al.  A review on tailored blanks—Production, applications and evaluation , 2014 .

[12]  Hyoung-Wook Kim,et al.  Annealing of flexible-rolled Al–5.5 wt%Mg alloy sheets for auto body application , 2010 .

[13]  J. Embury,et al.  Spatial and Temporal Characteristics of Propagating Deformation Bands in AA5182 Alloy at Room Temperature , 2011 .

[14]  D. Lloyd,et al.  Precipitation hardening in Al–Mg–Si alloys with and without excess Si , 2001 .

[15]  Peter Groche,et al.  On the Development of Novel Light Weight Profiles for Automotive Industries by Roll Forming of Tailor Rolled Blanks , 2011 .

[16]  Jürgen Hirsch,et al.  Aluminium Alloys for Automotive Application , 1997 .

[17]  Magnus Langseth,et al.  Modeling of textured aluminum alloys used in a bumper system: Material tests and characterization , 2006 .

[18]  J. Hirsch.  Aluminium in Innovative Light-Weight Car Design , 2011 .

[19]  O. Engler,et al.  Impact of homogenization on particles in the Al–Mg–Mn alloy AA 5454 – Experiment and simulation , 2013 .