Open-circuit fault analysis of diode rectified multiphase synchronous generators for DC aircraft power systems

The more-electric concept is becoming prevalent in all modes of transport, particularly civil aerospace where significant savings on fuel and improved efficiency can be achieved through the use of electrical power systems. Increased electrical loading for in-flight cabin air conditioning, galley services and entertainment systems has led to a re-evaluation of aircraft architecture. DC electrical networks offer the opportunity to decouple the frequency of generated supply from the speed of the gas turbine engine, enabling the independent optimisation of both systems. Using generator-rectifier systems with a higher phase number upholds the safety critical nature of air transport whilst also allowing for a reduction in DC voltage ripple and reducing or eliminating the need for filter capacitance. A multiphase generator has built-in redundancy, offering the potential for continued operation with an open-circuit winding or diode fault, but with implications on the rating and DC power quality. This paper provides analysis, simulation and experimental validation of a reconfigurable, wound-field multiphase synchronous generator connected to a diode rectifier under open-circuit fault conditions for two winding configurations, star and delta.

[1]  L. Parsa,et al.  On advantages of multi-phase machines , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[2]  John E. Fletcher,et al.  Steady-state performance assessment of three- and five-phase permanent magnet generators connected to a diode bridge rectifier under open-circuit faults , 2010 .

[3]  I. Marongiu,et al.  A multiphase PM synchronous generator wind turbine control for internal medium voltage DC distribution system , 2012, International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion.

[4]  Henry Cohen,et al.  Gas turbine theory , 1973 .

[5]  Ian Moir,et al.  The Aircraft Systems , 2012 .

[6]  P. L. Alger,et al.  Induction machines, their behavior and uses , 1995 .

[7]  Y.S. Wong,et al.  The state of the art of electric vehicles technology , 2004, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[8]  Judith Apsley,et al.  Diode rectification of multiphase synchronous generators for aircraft applications , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[9]  M. E. El-Hawary Electrical Energy Systems: Second Edition , 2000 .

[10]  Ali Emadi,et al.  Vehicular Electric Power Systems : Land, Sea, Air, and Space Vehicles , 2003 .

[11]  Gerhard Neidhöfer The evolution of the synchronous machine , 1992 .

[12]  Emil Levi,et al.  Multiphase Electric Machines for Variable-Speed Applications , 2008, IEEE Transactions on Industrial Electronics.

[13]  M. Omizo,et al.  Modeling , 1983, Encyclopedic Dictionary of Archaeology.

[14]  M. J. Provost The More Electric Aero-engine: a general overview from an engine manufacturer , 2002 .

[15]  Alexander C. Smith,et al.  Induction rim-drive for a marine propulsor , 2010 .

[16]  Andrew J. Forsyth,et al.  DC-bus power quality for UAV systems during generator fault conditions , 2010 .

[17]  Scott D. Sudhoff,et al.  Analysis of Electric Machinery and Drive Systems , 1995 .

[18]  Juha J. Pyrhönen,et al.  Performance of Low-Cost Permanent Magnet Material in PM Synchronous Machines , 2013, IEEE Transactions on Industrial Electronics.

[19]  J.A. Ortega,et al.  Moving towards a more electric aircraft , 2007, IEEE Aerospace and Electronic Systems Magazine.

[20]  N. Bianchi Electrical Machine Analysis Using Finite Elements , 2005 .

[21]  D. White,et al.  Electromechanical energy conversion , 1959 .

[22]  S. Crary Two-Reaction Theory of Synchronous Machines , 1937, Transactions of the American Institute of Electrical Engineers.

[23]  R. D. Ball,et al.  Alternating-current machines. A review of progress , 1962 .

[24]  W. Marsden I and J , 2012 .

[25]  H.A. Toliyat,et al.  Fault-tolerant five-phase permanent magnet motor drives , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[26]  Marian Kazmierkowski The Electric Generators Handbook Volume I: Synchronous Generators and Volume IIii: variable speed generators (Boldea, I.; 2006) - [Book Review] , 2007, IEEE Industrial Electronics Magazine.

[27]  A. Tessarolo,et al.  Analysis of split-phase electric machines with unequally-loaded stator windings and distorted phase currents , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[28]  Charles Stephen Dessain,et al.  To Charles Kingsley , 1971 .

[29]  D. Logan A First Course in the Finite Element Method , 2001 .

[30]  Duane C. Hanselman,et al.  Brushless Permanent-Magnet Motor Design , 1994 .

[31]  Girish Kumar Singh,et al.  Multi-phase induction machine drive research—a survey , 2002 .

[32]  C G Hodge,et al.  THE ELECTRIC WARSHIP THEN, NOW AND LATER , 2008 .

[33]  L. C. Woods,et al.  Field Computations in Engineering and Physics , 1962 .

[34]  J.M. Apsley,et al.  Derating of Multiphase Induction Machines Due to Supply Imbalance , 2010, IEEE Transactions on Industry Applications.

[35]  P. Haan,et al.  Does the hybrid Toyota Prius lead to rebound effects? Analysis of size and number of cars previously owned by Swiss Prius buyers , 2006 .

[36]  Yongdong Li,et al.  Application and challenges of power electronics for variable frequency electric power system of more electric aircraft , 2011, 2011 International Conference on Electrical Machines and Systems.

[37]  Enrico Levi Polyphase Motors: A Direct Approach to Their Design , 1984 .

[38]  R. W. Ashton,et al.  Selection and stability issues associated with a navy shipboard DC zonal electric distribution system , 2000 .