3D-printing zirconia implants; a dream or a reality? An in-vitro study evaluating the dimensional accuracy, surface topography and mechanical properties of printed zirconia implant and discs.
暂无分享,去创建一个
[1] Daniel Wismeijer,et al. Build Angle: Does It Influence the Accuracy of 3D-Printed Dental Restorations Using Digital Light-Processing Technology? , 2017, The International journal of prosthodontics.
[2] Daniel Wismeijer,et al. Factors Influencing the Dimensional Accuracy of 3D-Printed Full-Coverage Dental Restorations Using Stereolithography Technology. , 2016, The International journal of prosthodontics.
[3] L. Valandro,et al. Mechanical behavior of a Y-TZP ceramic for monolithic restorations: effect of grinding and low-temperature aging. , 2016, Materials science & engineering. C, Materials for biological applications.
[4] D. Wismeijer,et al. Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations. , 2016, The Journal of prosthetic dentistry.
[5] Paolo Colombo,et al. Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities , 2015 .
[6] Shyh-Yuan Lee,et al. Development of a Three-Dimensional Slurry Printing System Using Dynamic Mask Projection for Fabricating Zirconia Dental Implants , 2015 .
[7] L. Valandro,et al. Effect of low-temperature aging on the mechanical behavior of ground Y-TZP. , 2015, Journal of the mechanical behavior of biomedical materials.
[8] Michael V. Swain,et al. A Critical Review of Dental Implant Materials with an Emphasis on Titanium versus Zirconia , 2015, Materials.
[9] Jun-Beom Park,et al. Effects of titanium brush on machined and sand-blasted/acid-etched titanium disc using confocal microscopy and contact profilometry. , 2015, Clinical oral implants research.
[10] Jean-Pierre Kruth,et al. Additive manufacturing of ceramics: A review , 2014 .
[11] Jianyu Chen,et al. Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology. , 2014, The Journal of prosthetic dentistry.
[12] Wolfgang Wachter,et al. Light curing strategies for lithography-based additive manufacturing of customized ceramics , 2014 .
[13] L. Valandro,et al. Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y-TZP ceramic. , 2014, Journal of the mechanical behavior of biomedical materials.
[14] M. Swain,et al. Titanium versus zirconia implants supporting maxillary overdentures: three-dimensional finite element analysis. , 2013, The International journal of oral & maxillofacial implants.
[15] Robert J Williams,et al. CAD/CAM/AM applications in the manufacture of dental appliances. , 2012, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[16] S. Milz,et al. In vivo performance of zirconia and titanium implants: a histomorphometric study in mini pig maxillae. , 2012, Clinical oral implants research.
[17] E. D. Rekow,et al. Additive CAD/CAM process for dental prostheses. , 2011, Journal of prosthodontics : official journal of the American College of Prosthodontists.
[18] F. Melchels,et al. A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.
[19] H. Yılmaz,et al. Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y-TZP ceramics. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[20] H. Fischer,et al. Direct Inkjet Printing of Dental Prostheses Made of Zirconia , 2009, Journal of dental research.
[21] M. Hisbergues,et al. Zirconia: Established facts and perspectives for a biomaterial in dental implantology. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[22] N. Kübler,et al. Osseointegration of zirconia implants: an SEM observation of the bone-implant interface , 2008, Head & face medicine.
[23] R. Jung,et al. The zirconia implant-bone interface: a preliminary histologic evaluation in rabbits. , 2008, The International journal of oral & maxillofacial implants.
[24] I. Denry,et al. State of the art of zirconia for dental applications. , 2008, Dental materials : official publication of the Academy of Dental Materials.
[25] Lachlan M Carter,et al. Penetrating facial injury from angle grinder use: management and prevention , 2008, Head & face medicine.
[26] Jerry Y. H. Fuh,et al. Two-stage sintering of nano-sized yttria stabilized zirconia process by powder injection moulding , 2007 .
[27] Ann Wennerberg,et al. Oral implant surfaces: Part 1--review focusing on topographic and chemical properties of different surfaces and in vivo responses to them. , 2004, The International journal of prosthodontics.
[28] A. Piattelli,et al. Bone response to zirconia ceramic implants: an experimental study in rabbits. , 2003, The Journal of oral implantology.
[29] G. le Naour,et al. Evaluation of combinations of titanium, zirconia, and alumina implants with 2 bone fillers in the dog. , 1999, The International journal of oral & maxillofacial implants.
[30] L. Piegl,et al. Ten challenges in 3D printing , 2015, Engineering with Computers.
[31] Matthias G. R. Faes,et al. Extrusion-based 3D printing of ceramic components , 2015 .
[32] H. Schliephake,et al. Osseointegration of endodontic endosseous cones: zirconium oxide vs titanium. , 2000, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.
[33] C. Piconi,et al. Zirconia as a ceramic biomaterial. , 1999, Biomaterials.