Vertex Effect in Strain-Softening Concrete at Rotating Principal Axes

The inelastic behavior of concrete for highly nonproportional loading paths with rotating principal stress axes is studied. Test cylinders are first loaded in compression under uniaxial stress and then torsion is applied at constant axial displacement. Proportional compressive-torsional loading tests are also carried out for comparison. The tests demonstrate that the response of concrete for load increments parallel in the stress space to the current yield surface is highly inelastic ~i.e., much softer than elastic! in the peak load range and especially in the postpeak range. The classical tensorial models of plasticity type incorrectly predict for such load increments the elastic stiffness. The experiments are simulated by three-dimensional finite element analysis using the microplane model M4, in which the stress-strain relations are characterized not by tensors but by vectors of stress and strain on planes of various orientations in the material. It is shown that the observed vertex effect is correctly predicted by this model, with no adjustment of its material parameters previously calibrated by other test results. The experiments are also simulated by a state-of-the-art fracture-plastic model of tensorial type and it is found that the vertex effect cannot be reproduced at all, although an adjustment of one material parameter suffices to obtain a realistic postpeak slope and achieve a realistic overall response. What makes the microplane model capable of capturing the vertex effect is the existence of more than 60 simultaneous yield surfaces. Capturing the vertex effect is important for highly nonproportional loading with rotating principal stress axes, which is typical of impact and penetration of missiles, shock, blasts, and earthquake.

[1]  Zdenek P. Bazant,et al.  Microplane Model for Concrete , 1996 .

[2]  A. Phillips A review of quasistatic experimental plasticity and viscoplasticity , 1986 .

[3]  Thomas J. R. Hughes,et al.  Pseudo‐corner theory: a simple enhancement of J2‐flow theory for applications involving non‐proportional loading , 1986 .

[4]  D. C. Drucker Some implications of work hardening and ideal plasticity , 1950 .

[5]  Z. Bažant,et al.  Plastic-Fracturing Theory for Concrete , 1979 .

[6]  Z. Bažant,et al.  Addendum to the paper: Surface singularity and crack propagation☆ , 1980 .

[7]  Z. Bažant Comment on Orthotropic Models for Concrete and Geomaterials , 1983 .

[8]  Paul Mansour Naghdi,et al.  An experimental study of initial and subsequent yield surfaces in plasticity , 1957 .

[9]  H. J. Ivey Plastic Stress–Strain Relations and Yield Surfaces for Aluminium Alloys , 1961 .

[10]  Zdeněk P. Bažant,et al.  Microplane finite element analysis of tube‐squash test of concrete with shear angles up to 70° , 2001 .

[11]  Ferhun C. Caner,et al.  Microplane Model M4 for Concrete. I: Formulation with Work-Conjugate Deviatoric Stress , 2000 .

[12]  John W. Hutchinson,et al.  A class of phenomenological corner theories of plasticity , 1979 .

[14]  J. Dougill,et al.  On stable progressively fracturing solids , 1976 .

[15]  Ferhun C. Caner,et al.  MICROPLANE MODEL M4 FOR CONCRETE: II. ALGORITHM AND CALIBRATION , 2000 .

[16]  Zdenek P. Bazant,et al.  Microplane Constitutive Model and Metal Plasticity , 2000 .

[17]  A. H. Marchertas,et al.  Concrete model with normality and sequential identification , 1987 .

[18]  W. T. Koiter Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface , 1953 .

[19]  P. Bazant,et al.  Efficient Numerical Integration on the Surface of a Sphere , 1986 .

[20]  J. Rice,et al.  CONDITIONS FOR THE LOCALIZATION OF DEFORMATION IN PRESSURE-SENSITIVE DILATANT MATERIALS , 1975 .

[21]  Z. Bažant,et al.  Fracture and Size Effect in Concrete and Other Quasibrittle Materials , 1997 .

[22]  J. Rice Localization of plastic deformation , 1976 .

[23]  Herbert Becker,et al.  Column Behavior Under Conditions of Impact , 1952 .

[24]  J. L. Sanders PLASTIC STRESS-STRAIN RELATIONS BASED ON LINEAR LOADING FUNCTIONS , 1953 .

[25]  K. Willam,et al.  Triaxial failure criterion for concrete and its generalization , 1995 .

[26]  John R. Rice,et al.  On the Stability of Dilatant Hardening for Saturated Rock Masses , 1975 .

[27]  Z. Bažant,et al.  Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories , 1993 .

[28]  A. Stroud Approximate calculation of multiple integrals , 1973 .

[29]  Herbert Becker,et al.  Handbook of Structural Stability Part I: Buckling of Flat Plates , 1957 .

[30]  Zdenk P. Baant ENDOCHRONIC INELASTICITY AND INCREMENTAL PLASTICITY , 2002 .

[31]  Aris Phillips,et al.  Experimental Investigation of Corners in the Yield Surface , 1961 .

[32]  Z. Bažant,et al.  Creep and shrinkage prediction model for analysis and design of concrete structures-model B3 , 1995 .

[33]  Z. Bažant,et al.  MICROPLANE MODEL M 4 FOR CONCRETE . II : ALGORITHM AND CALIBRATION By , 2000 .

[34]  Bernard Budiansky,et al.  A Mathematical Theory of Plasticity Based on the Concept of Slip , 1949 .

[35]  Zdeněk P. Bažant,et al.  Work inequalities for plastic fracturing materials , 1980 .