Structure-property relationship in vanadium micro-alloyed TRIP steel subjected to the isothermal bainite transformation process

[1]  W. Xue,et al.  Simultaneous enhancement of strength and ductility in a medium carbon low-alloy steel induced by secondary martensite and Cu-rich particles , 2023, Materials Science and Engineering: A.

[2]  Z.D. Wang,et al.  Co-precipitation of nanosized Cu and carbides improving mechanical properties of 1 GPa grade HSLA steel , 2022, Materials Science and Engineering: A.

[3]  Y. Shen,et al.  Moderating strain hardening rate to produce high ductility and high strength in a medium carbon TRIP steel , 2022, Materials Research Letters.

[4]  Jun Lu,et al.  Enhanced ductility of strong cold-rolled ribbed rebar through intermediate frequency induction heat treatment based on recrystallization , 2021 .

[5]  Jae Sang Lee,et al.  Microstructure and tensile properties of chemically heterogeneous steel consisting of martensite and austenite , 2021, Acta Materialia.

[6]  L. Du,et al.  On the structure-property relationship in a novel 1000 MPa hot-rolled TRIP steel with strain-assisted ferrite transformation , 2021, Materials Science and Engineering: A.

[7]  Fucheng Zhang,et al.  Strain-hardening behavior and mechanisms of a lamellar-structured low-alloy TRIP steel , 2021, Materials Science and Engineering: A.

[8]  S. Richter,et al.  Revealing the relation between microstructural heterogeneities and local mechanical properties of complex-phase steel by correlative electron microscopy and nanoindentation characterization , 2021 .

[9]  Fucheng Zhang,et al.  Effect of introduced vanadium carbide at the bay region on bainite transformation, microstructure and mechanical properties of high-carbon and high-silicon steel , 2021 .

[10]  S. Zwaag,et al.  Fundamentals and application of solid-state phase transformations for advanced high strength steels containing metastable retained austenite , 2021, Materials Science and Engineering: R: Reports.

[11]  Zhou-hua Jiang,et al.  Multiphase microstructure formation and its effect on fracture behavior of medium carbon high silicon high strength steel , 2020 .

[12]  M. Soleimani,et al.  Transformation-induced plasticity (TRIP) in advanced steels: A review , 2020, Materials Science and Engineering: A.

[13]  D. Ponge,et al.  Phase boundary segregation-induced strengthening and discontinuous yielding in ultrafine-grained duplex medium-Mn steels , 2020 .

[14]  D. Wan,et al.  The effect of hydrogen on the crack initiation site of TRIP-assisted steels during in-situ hydrogen plasma micro-tensile testing: Leading to an improved ductility? , 2020 .

[15]  Yanjing Su,et al.  Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel , 2020 .

[16]  T. Park,et al.  Quantitative phase analysis of martensite-bainite steel using EBSD and its microstructure, tensile and high-cycle fatigue behaviors , 2020 .

[17]  G. Eggeler,et al.  Revealing the Two-Step Nucleation and Growth Mechanism of Vanadium Carbonitrides in Microalloyed Steels , 2020, Scripta Materialia.

[18]  Y. Liu,et al.  Critical microstructures and defects in heterostructured materials and their effects on mechanical properties , 2020 .

[19]  Chenghao Song,et al.  Investigation of microstructural evolution and bainite transformation kinetics of multi-phase steel , 2020, Materials Science and Engineering: A.

[20]  A. Shash,et al.  Replacement of silicon by aluminum with the aid of vanadium for galvanized TRIP steel , 2020 .

[21]  Xiaolei Wu,et al.  Perspective on hetero-deformation induced (HDI) hardening and back stress , 2019, Materials Research Letters.

[22]  H.B. Dong,et al.  Using transmission Kikuchi diffraction in a scanning electron microscope to quantify geometrically necessary dislocation density at the nanoscale. , 2019, Ultramicroscopy.

[23]  Sunghak Lee,et al.  Effects of solute segregation on tensile properties and serration behavior in ultra-high-strength high-Mn TRIP steels , 2019, Materials Science and Engineering: A.

[24]  A. K. Bhaduri,et al.  Role of hierarchical martensitic microstructure on localized deformation and fracture of 9Cr-1Mo steel under impact loading at different temperatures , 2018 .

[25]  B. S. Amirkhiz,et al.  Kinetics and microstructural change of low-carbon bainite due to vanadium microalloying , 2018 .

[26]  M. Mendelev,et al.  Solute effects on interfacial dislocation emission in nanomaterials: Nucleation site competition and neutralization , 2017, Scripta Materialia.

[27]  D. Chakrabarti,et al.  Effect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels , 2017 .

[28]  S. Subramanian,et al.  New insights into the mechanism of cooling rate on the impact toughness of coarse grained heat affected zone from the aspect of variant selection , 2017 .

[29]  B. Hu,et al.  High dislocation density–induced large ductility in deformed and partitioned steels , 2017, Science.

[30]  N. Bozzolo,et al.  Statistical analysis of dislocations and dislocation boundaries from EBSD data. , 2017, Ultramicroscopy.

[31]  J. Sietsma,et al.  A quantitative investigation of the effect of Mn segregation on microstructural properties of quenching and partitioning steels , 2017 .

[32]  Xiaolei Wu,et al.  Heterogeneous materials: a new class of materials with unprecedented mechanical properties , 2017, Heterostructured Materials.

[33]  C. Becquart,et al.  Formation of carbon Cottrell atmospheres and their effect on the stress field around an edge dislocation , 2017 .

[34]  M. Mendelev,et al.  Effects of solutes on dislocation nucleation from grain boundaries , 2017 .

[35]  T. Tsuchiyama,et al.  Microstructure and mechanical properties of a medium manganese steel treated with interrupted quenching and intercritical annealing , 2016 .

[36]  J. Narayan,et al.  Mechanical properties of copper/bronze laminates: Role of interfaces , 2016 .

[37]  T. N. Baker.  Microalloyed steels , 2016 .

[38]  F. Yuan,et al.  Back stress strengthening and strain hardening in gradient structure , 2016 .

[39]  W. M. Rainforth,et al.  Microstructural evolution during bainite transformation in a vanadium microalloyed TRIP-assisted steel , 2016 .

[40]  S. Zwaag,et al.  Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels , 2015 .

[41]  J. Seol,et al.  Nano-scale observation on the transformation behavior and mechanical stability of individual retained austenite in CMnSiAl TRIP steels , 2015 .

[42]  H. Bhadeshia,et al.  Bainite in Steels , 2019 .

[43]  R. Dronskowski,et al.  Impact of short-range ordering on yield strength of high manganese austenitic steels , 2014 .

[44]  B. Rolfe,et al.  Characterization of microstructures and tensile properties of TRIP-aided steels with different matrix microstructure , 2014 .

[45]  J. Sietsma,et al.  Microstructural analysis of martensite constituents in quenching and partitioning steels , 2014 .

[46]  D. Ponge,et al.  Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation , 2014, 1402.0232.

[47]  Bing Chen,et al.  The effect of morphology on the stability of retained austenite in a quenched and partitioned steel , 2013 .

[48]  C. G. Park,et al.  Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical prope , 2012 .

[49]  T. Koyama,et al.  Formation mechanism of the hierarchic structure in the lath martensite phase in steels , 2011 .

[50]  M. Kamaya.  Assessment of local deformation using EBSD: quantification of accuracy of measurement and definition of local gradient. , 2011, Ultramicroscopy.

[51]  M. Calcagnotto,et al.  Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD , 2010 .

[52]  T. N. Baker.  Processes, microstructure and properties of vanadium microalloyed steels , 2009 .

[53]  C. Scott,et al.  Vanadium Precipitation During Intercritical Annealing in Cold Rolled TRIP Steels , 2007 .

[54]  Yoritoshi Minamino,et al.  Crystallographic features of lath martensite in low-carbon steel , 2006 .

[55]  N. Hansen.  Boundary strengthening in undeformed and deformed polycrystals , 2005 .

[56]  Jinghui Wu,et al.  Image Quality Analysis: A New Method of Characterizing Microstructures , 2005 .

[57]  B. C. De Cooman,et al.  Structure–properties relationship in TRIP steels containing carbide-free bainite , 2004 .

[58]  D. Raabe,et al.  Relation between microstructure and mechanical properties of a low-alloyed TRIP steel , 2004 .

[59]  Tadashi Furuhara,et al.  The morphology and crystallography of lath martensite in Fe-C alloys , 2003 .

[60]  H. Tsubakino,et al.  Aging properties of vanadium-bearing high manganese stainless steel , 1997 .

[61]  W. C. Leslie,et al.  Tempering of steel , 1972, Steels.

[62]  R. Honeycombe,et al.  Precipitation of carbides at γ─α boundaries in alloy steels , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[63]  J. Greer,et al.  Deformation response of ferrite and martensite in a dual-phase steel , 2014 .

[64]  D. Matlock,et al.  Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment , 2008 .

[65]  A. Mortensen,et al.  Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues , 2003 .