Turbulent boundary layer

On the basis of a superposition model of turbulent eddies in contact with a solid wall, some new laws regarding the behavior of the turbulent boundary layer are established.

[1]  George L. Mellor,et al.  Equilibrium turbulent boundary layers , 1964, Journal of Fluid Mechanics.

[2]  F. Clauser.  The Turbulent Boundary Layer , 1956 .

[3]  D. Coles.  The law of the wake in the turbulent boundary layer , 1956, Journal of Fluid Mechanics.

[4]  V. C. Patel.  Calibration of the Preston tube and limitations on its use in pressure gradients , 1965, Journal of Fluid Mechanics.

[5]  B. A. Stein,et al.  An assessment of radiative metallic thermal protection systems for space shuttle , 1972 .

[6]  I. K. Collins,et al.  Heat-Transfer And Pressure Measurements on a Flat-Plate Surface and Heat-Transfer Measurements on Attached Protuberances in a Supersonic Turbulent Boundary Layer at Mach Numbers Of 2.65, 3.51, and 4.44 , 1962 .

[7]  A. Charwat.  EXPLORATORY STUDIES ON THE SUBLIMATION OF SLENDER CAMPHOR AND NAPHTHALENE MODELS IN A SUPERSONIC WIND-TUNNEL , 1968 .

[8]  C. L. Jaeck,et al.  Analysis of pressure and heat transfer tests on surface roughness elements with laminar and turbulent boundary layers Final report , 1966 .

[9]  R. Antonia,et al.  The response of a turbulent boundary layer to a step change in surface roughness Part 1. Smooth to rough , 1971, Journal of Fluid Mechanics.

[10]  F. W. Williams,et al.  Natural frequencies of frames with axially loaded Timoshenko Members , 1973 .

[11]  Herman L. Bohon,et al.  Radiative Metallic Thermal Protection Systems: A Status Report , 1977 .

[12]  V. N. Desyatnik,et al.  The fusibilities of salt systems containing uranium trichloride , 1970 .

[13]  R. Miserentino,et al.  Aerothermal performance and structural integrity of a Rene 41 thermal protection system at Mach 6.6 , 1975 .

[14]  J. R. Morison,et al.  The Force Exerted by Surface Waves on Piles , 1950 .

[15]  Peter Bradshaw,et al.  The turbulence structure of equilibrium boundary layers , 1967, Journal of Fluid Mechanics.

[16]  K. C. Chen,et al.  Compressible Turbulent Boundary-Layer Heat Transfer to Rough Surfaces in Pressure Gradient , 1972 .

[17]  Toshi Kubota,et al.  An experiment on the adiabatic compressible turbulent boundary layer in adverse and favourable pressure gradients , 1972, Journal of Fluid Mechanics.

[18]  E. Hopkins,et al.  An evaluation of theories for predicting turbulent skin friction and heat transfer on flat plates at supersonic and hypersonic Mach numbers , 1971 .

[19]  A. M. Cary,et al.  Effect of two-dimensional multiple sine-wave protrusions of the pressure and heat-transfer distributions for a flat plate at Mach 6 , 1968 .

[20]  D. C. Mathews,et al.  Use of Coles' universal wake function for compressible turbulent boundary layers , 1970 .

[21]  V. Vatsa,et al.  Numerical Study of Separated Laminar Boundary Layers over Multiple Sine-Wave Protuberances , 1976 .

[22]  A. Townsend,et al.  Self-preserving flow inside a turbulent boundary layer , 1965, Journal of Fluid Mechanics.

[23]  A. Yaglom.  Similarity Laws for Constant-Pressure and Pressure-Gradient Turbulent Wall Flows , 1979 .

[24]  S. C. Dixon,et al.  TECHNICAL NOTE D- 1626 EXPERIMENTAL PRESSURES AND TURBULENT HEAT-TRANSFER COEFFICIENTS ASSOCIATED WITH SINUSOIDAL PROTUBERANCES ON A FLAT PLATE AT A MACH NUMBER OF 3 , 1963 .

[25]  H. Mcdonald,et al.  The effect of pressure gradient on the law of the wall in turbulent flow , 1969, Journal of Fluid Mechanics.

[26]  R. Davis,et al.  Momentum Transfer for Flow over a Flat Plate with Blowing , 1957 .

[27]  M. Stockburger,et al.  Spectroscopic studies on napththalene in the vapor phase. III. Phosphorescence and intersystem crossing yields of single vibronic levels , 1975 .

[28]  F. A. Schraub,et al.  The structure of turbulent boundary layers , 1967, Journal of Fluid Mechanics.