Using Embedded Fiber Bragg Grating (FBG) Sensors in Smart Aircraft Structure Materials

Abstract This paper describes the process of developing a smart material with monitoring application to the aircraft structures. A part of vertical stabilizer was selected and reproduced using carbon fiber honeycomb core sandwich panels. The sandwich panels reproduced were fabricated in accordance to the generic sandwich structure and aviation industry standards, including the materials and also the method of construction. Using a carbon fiber from Hexcel as the face-sheet, Nomex honeycomb as the core, the sandwich panel was cured using Hysol EA9330 resin according to aviation industry standard curing process. In order to make the sandwich panel as smart materials, optical sensor which has fiber bragg grating arrays, FBG, were embedded between the carbon fiber plies during the lay-out process. Using an FBG data logger, the FBG sensor signals were read before and after the FBG arrays were installed in the sandwich panels. From the initial measurement, the experiment was a success since the FBG sensors were readable and the difference in the signals was less than 1 nm. In the future, the specimen will be used for further experiment for measuring strains and establishing the existence of damage in the panel.

[1]  W. Kuntjoro,et al.  Development of Fatigue Life Monitoring of Rmaf Fighter Airplanes , 2009 .

[2]  Nobuo Takeda,et al.  Structural health monitoring of composite wing structure during durability test , 2007 .

[3]  Nobuo Takeda,et al.  Real-time Detection of Debonding between Honeycomb Core and Facesheet using a Small-diameter FBG Sensor Embedded in Adhesive Layer , 2007 .

[4]  Nobuo Takeda,et al.  Smart Composite Sandwich Structures for Future Aerospace Application -Damage Detection and Suppression-: a Review , 2007 .

[5]  Nobuo Takeda,et al.  Smart aircraft composite structures with embedded small-diameter optical fiber sensors , 2012, Asia Pacific Optical Sensors Conference.

[6]  Victor Giurgiutiu,et al.  Enhanced Composites Integrity Through Structural Health Monitoring , 2012, Applied Composite Materials.

[7]  Constantinos Soutis,et al.  Structural health monitoring techniques for aircraft composite structures , 2010 .

[8]  Aditi Chattopadhyay,et al.  Damage assessment of CFRP composites using a time–frequency approach , 2012 .

[9]  M.J.L. Van Tooren.  Sandwich fuselage design , 1998 .

[10]  Application of Optical Fiber Bragg Grating Sensor for Structure Monitoring , 2006 .

[11]  C. Murthy,et al.  Structural Health Monitoring (SHM) Using Strain Gauges, PVDF Film and Fiber Bragg Grating (FBG) Sensors: A Comparative Study , 2006 .

[12]  Nobuo Takeda,et al.  Damage detection in composites using optical fibre sensors , 2007 .

[13]  Aniello Riccio,et al.  Positioning of Embedded Optical Fibres Sensors for the Monitoring of Buckling in Stiffened Composite Panels , 2013, Applied Composite Materials.